LRC LMBR120LFT1G Schottky barrier rectifiers reverse voltage 20 to 60v forward current 1.0a Datasheet

LMBR120LFT1G Thru LMBR160LFT1G
Schottky Barrier Rectifiers
Reverse Voltage 20 to 60V Forward Current 1.0A
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Low power loss,high efficiency
* For use in low voltage high frequency inverters,
free wheeling,and polarity protection applications
* Guardring for over voltage protection
* High temperature soldering guaranteed:
260°C/10 seconds at terminals
Mechanical Data
Case: SOD123-FL/MINI SMA
molded plastic over sky die
Terminals: Tin Plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.0155 g
Handling precautin:None
We declare that the material of product is
Haloggen free (green epoxy compound)
1.Electrical Characteristic
Maximum & Thermal Characteristics Ratings
Parameter Symbol
symbol
device marking code
at 25°C ambient temperature unless otherwise specified.
LMBR120LFT1G
LMBR140LFT1G
LMBR160LFT1G
12L
14L
16L
Unit
Maximum repetitive peak reverse
voltage
VRRM
20
40
60
V
Maximum RMS voltage
VRMS
14
28
42
V
Maximum DC blocking voltage
VDC
20
40
60
V
Maximum average forward rectified
current at TC= 75°C
IF(AV)
1.0
A
Peak forward surge current 8.3ms
single half sine-wave superimposed on
rated load (JEDEC Method)
IFSM
30
A
RθJA
110
40
°C/W
Typical thermal resistance (Note 1)
Operating junction temperature range
storage temperature range
RθJC
TJ
–55 to +125
–55 to +150
°C
–65 to +150
TSTG
°C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbol
symbol
LMBR120LFT1G
LMBR140LFT1G
LMBR160LFT1G
Unit
Maximum instantaneous forward
voltage at(IF = 0.4 A, TJ = 25°C)
(IF = 1.0 A, TJ = 25°C)
VF
0.34
0.45
0.5
0.58
V
Maximum DC reverse current at rated
DC blocking voltage TA = 25°C
Tj = 125°C
IR
0.10
10
Typical junction capacitance at
4.0V, 1MHz
CJ
NOTES:
1. 8.0mm2 (.013mm thick) land areas
0.03
10
160
mA
PF
LMBR120LFT1G Thru LMBR160LFT1G
2.Ratings and Characteristic Curves ( TA = 25°C unless otherwise noted )
Fig. 2 – Maximum Non-repetitive Peak
Forward Surge Current
60 Hz
Resistive or
Inductive Load
1.0
Peak forward surge current (A)
Average Forward Rectified Current (A)
Fig. 1 – Forward Current Derating Curve
0.5
30
15
0
0
100
25 50 75 100 125 150 175
CASE TEMPERATURE:Tc(°C)
Fig 3. – Typical Instantaneous Forward
Characteristics
10
1.0
TJ = 25°C
Pulse width = 300µs
1% Duty Cycle
0.1
0.01
0.2
10
Tj=125
1
0.1
0.01
0.4
0.6
0.8
1.0
1.2
Instantaneous Forward Voltage (V)
Fig 5. –typical transient thermal
impedance
10
Number of Cycles at 60Hz
Fig 4. – Typical Reverse Characteristics
Tj=25℃
0.001
0
20
40
60
80
Percent of Rated Peak Reverse Voltage (%)
Fig 6. – Typical Junction Capacitance
1000
Junction Capacitance (pF)
100
1
Instantaneous Reverse Current (mA)
Instantaneous Forward Current (A)
0
Transient thermal impedance(°C/W)
TJ = TJ max
8.3ms Single Half
Sine-wave
(JEDEC Method)
10
1.0
0.1
TJ = 25°C
f = 1.0 MHz
Vsig =
50mVp p
100
10
0.01
0.1
1.0
10
t,Pulse duration,sec
100
0.1
1
Reverse Voltage (V)
10
LMBR120LFT1G Thru LMBR160LFT1G
3. dimension:
SOD123-FL
MILLIMETERS
MIN
MAX
3.5
3.9
0.75
0.95
2.6
3.0
1.6
2.0
0.45Typ
0.9
1.2
0.12
0.22
0.8Typ
DIM
A
B
C
D
E
H
J
K
INCHES
MIN
MAX
0.138
0.159
0.029
0.037
0.103
0.119
0.063
0.079
0.018Typ
0.036
0.047
0.005
0.009
0.032Typ
Suggested solder pad layout
B
C
A
Dimensions in inches and (millimeters)
PACKAGE
A
B
C
SOD123-FL
0.044(1.10
0.040(1.00)
0.079(2.00)
LMBR120LFT1G Thru LMBR160LFT1G
Reel packing
INNER BOX
REEL DIA.
CARTON SIZE
CARTON
(mm)
(mm)
(mm)
(PCS)
183*183*123
178
382*262*387
240,000
5.Suggested thermal profile for soldering process
1. Storage environment:Temperature=5~40℃ Humidity=55±25%
2. Reflow soldering of surface-mount device
3. Reflow soldering
Profile Feature
Soldering Condition
Average ramp-up rate(TL to TP)
<3℃/sec
Preheat
- Temperature Min(Tsmin)
150℃
- Temperature Max(Tsmax)
200℃
- Time(min to max)(t s )
60~120sec
Tsmax to TL
- Ramp-up Rate
<3sec
Time maintained above:
- Temperature (TL)
- Time(t L)
Peak Temperature(TP)
Time within 5℃ of actual Peak
Temperature(TP)
217℃
60-260sec
255 -0/+5℃
10~30sec
Ramp-down Rate
<6℃/sec
Time 25℃ to Peak Temperature
<6minutes
APPOX.
GROSS WEIGHT
(kg)
8.7
LMBR120LFT1G Thru LMBR160LFT1G
6.High reliability test capabilities
Item Test
Solder Resistance
Condition
at 260±5℃ for 10±2sec immerse
body into solder 1/16" ± 1/32"
Reference
MIL-STD-750D METHOD-2031
Solderability
at 245±5℃ for 5 sec
MIL-STD-202F METHOD-208
High Temperature Reverse Bias
VR=80% rate at T j=150℃ for 168hrs
MIL-STD-750D METHOD-1038
Forward Operation Life
Rated average rectifier current
TA=25℃ for 500hrs
MIL-STD-750D METHOD-1027
Intermittent Operation Life
TA=25℃,IF=IO
On state:power on for 5 min.
Off state:power off for 5 min.
on and off for 500 cycles
MIL-STD-750D METHOD-1036
Pressure Cooker
15PSIG at TA=121℃ for 4hrs
JESD22-A102
Temperature Cycling
-55℃ to +125℃ dwelled for 30 min.
and transferred for 5min. Total 10 cycles
MIL-STD-750D METHOD-1051
Thermal Shock
0℃ for 5min. Rise to 100℃ for 5min.
Total 10 cycles
MIL-STD-750D METHOD-1056
Forward Surge
8.3ms single half sine-wave
superimposed on rated load,one surge
MIL-STD-750D METHOD-4066-2
Humidity
at TA=85℃,RH=85% for 1000hrs
MIL-STD-750D METHOD-1021
High Temperature Storage Life
at 175℃ for 1000hrs
MIL-STD-750D METHOD-1031
Title :
DOC NO.:
Power Diode SMD Package Pa cking Spec
Version: 5
WI-258
Modification: 0
Page:
2
5.1 、SMD Packing Reel Spec & Packing Quantity
5.1.1 Reel Packing
A. Reel Spec
unit:mm
SPEC
SMA-FL 7" reel
TO277 13" reel
SOD123FL 7" reel
SOD323HE 7" reel
SMB-FL 13" reel
A
177.0±2.0
330.0±2.0
177.0±2.0
177.0±2.0
330.0±2.0
B. 13" reel packing box
B
54.0±0.5
75.0±0.5
50.0±0.5
50.0±0.5
75.0±0.5
C
13.0±0.5
13.0±0.5
13.0±0.5
13.0±0.5
13.0±0.5
W
13.2±0.2
13.2±0.2
9.4±1.5
9.4±1.5
13.2±0.2
Quantity/Reel
3K
5K
3K
3K
5K
unit:mm
A
335±5.0
size
B
335±2.0
as per above packing
Spec
TO277 13" reel
SMB-FL 13" reel
Q'ty/Box
10K
10K
C
40±1.0
Title :
Power Diode SMD Package Packing Spec
DOC NO.:
WI-258
DOC NO.:
WI-258
Page:
3
C. 7" reel packing box
unit:mm
SMA-FL
SOD123FL
SOD323HE
A
B
C
186±2.0
139±2.0
185±2.0
as per above packing
Q'ty/Box
SMA-FL
30K
SOD123FL
30K
SOD323HE
30K
D. reel packing carton
unit:mm
A
350±2.0
size
B
340±2.0
C
350±2.0
as per above packing
Spec
TO277 13" reel
SMB-FL 13" reel
Q'ty/Carton
80K
80K
unit:mm
SMA-FL
SOD123FL
SOD323HE
A
B
C
455±2.0
400±2.0
410±2.0
as per above packing
Spec
SMA-FL 7" reel
SOD123-FL 7" reel
SOD323HE 7" reel
5.1.2 Tape Spec
A. Cover Tape
unit:mm
A
SMA-FL
SMB-FL
TO277
B
9.5±0.10
SOD123FL
5.4±0.10
SOD323HE
0.062±0.007
Q'ty/Carton
360K
360K
360K
Title :
DOC NO.:
Power Diode SMD Package Packing Spec
Version: 5
WI-258
Modification: 0
Page: 4
B. Carrier Tape
Do
P2
Po
t
P1
A
D1
A'
Bo
W
F
E
B'
B
SEC.:B-B'
Cathode(tape
hole side)
Ko
Ao
SEC.:A-A'
Item
W
P1
E
F
D0
D1
P0
P2
10P0
A0
B0
K0
SOD323HE
8±0.3
4±0.1
1.75±0.1
3.5±.05
1.55±0.05
1.1±0.1
4±0.1
2±0.05
40±0.2
1.45±0.1
2.75±0.1
0.80±0.1
SOD123FL
8±0.3
4±0.1
1.75±0.1
3.5±.05
1.55±0.05
1.1±0.1
4±0.1
2±0.05
40±0.2
1.95±0.1
3.95±0.1
1.30±0.1
T
0.25±0.05
0.25±0.05
SMA-FL
12±0.3
4±0.1
1.75±0.1
5.5±.05
1.55±0.05
1.5±0.1
4±0.1
2±0.05
40±0.2
2.83±0.1
4.75±0.1
1.42±0.1
SMB-FL
TO277
12±0.3
8±0.1
1.75±0.1
5.5±.05
1.55±0.05
1.5±0.1
4±0.1
2±0.05
40±0.2
4.3±0.1
6.8±0.1
1.35±0.1
12±0.3
8±0.1
1.75±0.1
5.5±0.05
1.55±0.05
1.55±0.05
4±0.1
2±0.05
40±0.2
3.8±0.1
5.75±0.1
1.4±0.1
0.25±0.05 0.25±0.05 0.25±0.05
Title :
DOC NO.:
Power Diode SMD Package Packing Spec
Version: 5
WI-258
Modification: 0
Page: 5
5.2、SMD Power Diode General Packing Spec
A. 7" reel
all labels will be at cathode side of reel
;
B
C
A
C
side
front
B. 13" reel
A:LRC label;
A
B
C
A:LRC label;
B:Environment Label
C:Halide free label
B
C
A
B:Environment Labe C:Halide free label
C.Tape lead: face anode side of the reel,upper side is the tape lead position. All labels are at cathode side of the reel.
标题:
DOC NO.:
Power Diode SMD Package Packing Spec
Version: 5
Modification: 0
Page:
C. Label Content :
LRC Label
WI-258
6
Two-dimension code
Manufacturing
it
P/N
`
Lot No.
Date code
Maker
Quantity
lot: 140106049X: 140106---2014/1/6;049----lot number:49;X:product code
Environment Label
Halide-free Label
Green
LMBR120LFT1G Thru LMBR160LFT1G
7. Update Record
版次
更新记录
更新作者
更新日期
1
第一版
周杰
2013.09.03
周杰
2014.06.30
2
1.将LMBR120LFT1G VF由0.45V改为0.385V;
2.IR由0.03mA改为0.10mA;
Similar pages