NXP NT2016SA-19.2M-NSA3456A Temperature-compensated crystal oscillator with afc function (vc-tcxo) nt2016s sery Datasheet

Crystal Oscillator
NEW
Model Name NT2016SA Temperature-Compensated Crystal Oscillator with AFC Function (VC-TCXO) NT2016S Series
n Main Application
For mobile phones, etc.
n Features
l Supports low power supply voltage. (Supports DC +2.4 V±0.1 V to 2.9 V±0.1 V.)
l Ultra-compact and light with a height, cubic volume, and weight of Max. 0.8 mm,
0.0022 cm3, and 0.008 g, respectively.
l With an AFC (Automatic Frequency Control) function.
l Low power consumption.
Pb
Free
l A surface-mount crystal oscillator. (Reflow soldering is possible.)
l Lead-free. Meets the requirements for re-flow profiling using lead-free solder.
n Specifications
Model
Item
NT2016SA
13 to 26
Standard nominal frequency (MHz)
+2.8
Supply voltage [VCC] (V)
10 kΩ//10 pF
Load
Max. 1.5
Current consumption (mA)
Min. 0.8 V(P-P) (DC Coupling *1)
Output voltage
Max. ±2.5×10–6
Frequency stability
Operating temperature range (°C)
–30 to +75
• Frequency setting conditions
1. Frequencies are set at normal temperatures (+25±2 °C).
2. Frequencies are set with a printed board that has a
ground pattern attached to the underside of an oscillator.
• If you require a product with a different frequency, power
supply voltage, frequency control characteristic, etc. to the
standard specifications, please contact us with your
enquiries.
• Products with the AFC (Automatic Frequency Control)
function are available. If you require such a product, please
contact us.
Max. ±0.2×10–6/+2.8 V±5 %
Supply variation
Max. ±0.2×10–6/(10 kΩ//10 pF) ±10 %
Load variation
Max. ±1.0×10–6/year
Aging
±9.0×10–6 to ±15.0×10–6/+1.4 V±1 V *2
AFC characteristic
*1. A DC-cut capacitor is not embedded in this crystal
oscillator. Connect a DC-cut capacitor (1,000 pF) to the
line-out terminal of the oscillator.
*2. This is a representative specification. The specifications
may change according to the frequency that you request.
n Dimensions
n List of Ordering Codes
mm
2.0 ± 0.1
#3
1.6 ± 0.1
#4
#1
PAD No.
Connection
#1
VCONT
#2
GND
#3
OUTPUT
#4
VCC
#2
Frequency
(MHz)
Ordering Code
13
NT2016SA-13M-NSA3456A
19.2
NT2016SA-19.2M-NSA3456A
26
NT2016SA-26M-NSA3456A
The above frequencies are NDK’ s standard frequencies.
Frequencies other than the above are available.
Feel free to contact our sales representatives.
1.2 ± 0.05
#2
1.2
0.6
0.4 ± 0.1
0.8
0.4
#3
#4
0.4 ± 0.05
0.6 ± 0.1
0.8
#1
0.7 ± 0.1
Reference land pattern
co09_080926_NT2016SA_e
Similar pages