7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2007 RELEASED FOR PUBLICATION 6 5 4 3 2 1 2007 REVISIONS ALL RIGHTS RESERVED. BY - P LTR D D 1 SURFACE TRACES PERMITTED WITHIN THIS AREA EXCEPT WHERE CAGE STANDOFFS, SHOWN IN DETAIL S, CONTACT PC BOARD. 2 PITCH BETWEEN PORTS OF ONE 1X3 CAGE ASSEMBLY. 3 SPACING BETWEEN CAGES ON THE SAME PC BOARD, TO BE SPECIFIED BY CUSTOMER, MUST COMPLY WITH MINIMUM DIMENSIONS SHOWN. 4 REFERENCE APPLICATION SPEC 114-13218 FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS. 5 UNPLATED THRU HOLE. 6 DATUMS AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 7 DATUM 8 DIMENSION C IS THE NOMINAL THICKNESS OF CUSTOMER SUPPLIED PC BOARD. MINIMUM PC BOARD THICKNESS: SINGLE SIDED = 1.45mm DOUBLE SIDED = 2.2mm PER QSFP -A- DESCRIPTION DATE REVISED PER ECO-15-000148 DWN APVD RG 24FEB2015 MC 12 2D BARCODE AND DATE CODE D IS TOP SURFACE OF PC BOARD. 9. MATES WITH QSFP MSA COMPATIBLE TRANSCEIVER. C 10 BASELINE FOR THESE DIMENSIONS IS THE CENTER OF COMPLIANT PIN HOLE. 11 LED ON HOST BOARD. OF LIGHT PIPES. 12 2D BARCODE AND DATE CODE (YYWWD) MARKED APPROXIMATELY AS SHOWN. 13 REFERENCE APP SPEC 114-13218 FOR GASKET THICKNESS CALCULATION. 14 MATERIAL: CAGE ASSEMBLY: NICKEL SILVER, 0.25 THICK EMI SPRINGS: COPPER ALLOY FRONT FLANGE: ZINC ALLOY. 15 FINISH: EMI SPRINGS: 2µm MINIMUM TIN FRONT FLANGE: 3µm MINIMUM TIN OVER 1.27µm MINIMUM NICKEL OVER 5.08µm MINIMUM COPPER. QUANTITY, POSITION AND GEOMETRY DEPENDS ON CHOICE EMI SPRINGS C CAGE ASSEMBLY ( 53.95 ) ( 60 ) 6X ( n 1.9 ) 3X ( 13.76 ) 3X ( 6.88 ) ( 9.7 ) ( 15.13 ) 6X ( 2 ) ( 13.03 ) 2.2 MAX 2X ( 19 ) 2 B S SEE DETAIL B FRONT FLANGE 2007473-1 3 MAX TYP A THIS DRAWING IS A CONTROLLED DOCUMENT. DETAIL S SCALE 20:1 1 DIMENSIONS: mm MATERIAL 4805 (3/13) TBD 14 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.1 0.1 0.013 0.0001 - 15 DWN 21NOV2007 CHK 21NOV2007 APVD 21NOV2007 C. VALENTINE E. BRIGHT E. BRIGHT PART NUMBER TE Connectivity NAME PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING A SIZE 1X3 CAGE ASSEMBLY, W/ LIGHT PIPE BRACKET, BEHIND BEZEL, QSFP CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 2007473 SCALE 3:1 SHEET 1 OF - 4 REV D 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2007 RELEASED FOR PUBLICATION BY - 6 5 4 3 2 1 2007 REVISIONS ALL RIGHTS RESERVED. P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 3 60.5 HOLES OR WINDOWS FOR LIGHT PIPES, PLACEMENT AND SIZE DEPEND ON CHOICE OF LIGHT PIPE. 0.1 MIN R 0.3 MAX TYP 48 .25 MAX 5.2 MAX D D BEZEL 11 9.7 57.5 0.2 0.3 0.2 (FOR PCI APPLICATIONS 0.4 # 0.1) 0.1 37 MAX GAP FOR EMI GASKET PROVIDED BY CUSTOMER ONE SIDED CONFIGURATION SCALE 3:1 C POSTS PER SPEC 0.3 13 C 0.2 (C+0.4) # 0.1 B B C 8 (THICKNESS OF PC BOARD) BELLY TO BELLY CONFIGURATION SIMILAR TO ONE SIDED EXCEPT WHERE NOTED SCALE 3:1 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: THIS PRODUCT HAS NOT COMPLETED VALIDATION/QUALIFICATION TESTING mm MATERIAL 4805 (3/13) TBD - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 0.1 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 21NOV2007 CHK 21NOV2007 APVD 21NOV2007 C. VALENTINE E. BRIGHT E. BRIGHT TE Connectivity NAME PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING SIZE 1X3 CAGE ASSEMBLY, W/ LIGHT PIPE BRACKET, BEHIND BEZEL, QSFP CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 2007473 SCALE 3:1 SHEET 2 OF - 4 REV D 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2007 RELEASED FOR PUBLICATION 6 5 4 3 2 1 2007 REVISIONS ALL RIGHTS RESERVED. BY - P LTR - 57.2 DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - MAX 1 10 SEE DETAIL 17.38 M 18.5 19 D 11 SEE DETAIL (1.05) 4 DETAIL SCALE J AREA DENOTES COMPONENT KEEP-OUT (TRACES PERMITTED) -U- 5 6X n 1.55 0.1 MAX 0.05 0.4 TYP 2X D M 10:1 4.5 10.3 MAX 0.35 0.03 0.8 TYP 11.3 MIN C 38X 38X 1 1.8 0.03 C 2.5 3X 2X 0.8 MIN 40.68 2X 7 37.7 5.18 6X 3.05 MAX 30.1 1.69 3X MAX 0.89 9 15.02 MIN MAX B B 3X 9 DETAIL J 3 PLACES SCALE 8:1 4.5 BSC 6 6 -X- 1 MIN 4 3X (1.05) 1.1 6 -T- 3X BSC 6 -Y- 21X 3X A (1.05) 4 3.4 MIN 3 TO q OF FIRST ROW OF HOLES FOR NEXT ADJACENT CAGE 17.9 CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 19 59 MIN A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: THIS PRODUCT HAS NOT COMPLETED VALIDATION/QUALIFICATION TESTING 4805 (3/13) RECOMMENDED PC BOARD LAYOUT SINGLE SIDE MOUNT CONFIGURATION SCALE 5:1 mm MATERIAL TBD - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 0.1 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 21NOV2007 CHK 21NOV2007 APVD 21NOV2007 C. VALENTINE E. BRIGHT E. BRIGHT TE Connectivity NAME PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING SIZE 1X3 CAGE ASSEMBLY, W/ LIGHT PIPE BRACKET, BEHIND BEZEL, QSFP CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 2007473 SCALE 3:1 SHEET 3 OF - 4 REV D 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2007 RELEASED FOR PUBLICATION 6 5 4 3 2 1 2007 REVISIONS ALL RIGHTS RESERVED. BY - P LTR - 4 D 15.25 6X (1.05) n 1.55 SEE SHEET 1 DWN APVD - - - 15.25 15.75 11 -U- 5 DATE 3.25 3.25 2.13 DESCRIPTION SEE DETAIL D K 0.05 38X 0.4 0.35 0.03 38X 0.8 TYP 1.8 0.03 2.5 4.5 C C 6X 5.18 40.68 37.7 1 6X 30.1 DETAIL K 3 PLACE SCALE 8:1 B B 7X 6 6 4.5 7 BSC -X- 3X 4 (1.05) 3X BSC -T- 6 6 A 1.1 3X 44X (1.05) 4 17.9 3 TO q OF FIRST ROW OF HOLES FOR NEXT ADJACENT CAGE 19 -Y- RECOMMENDED PC BOARD LAYOUT BELLY TO BELLY CONFIGURATION SEE SHEET 3 FOR COMPONENT AND TRACE KEEP-OUTS SCALE 5:1 THIS PRODUCT HAS NOT COMPLETED VALIDATION/QUALIFICATION TESTING 4805 (3/13) 3.4 MIN A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL TBD - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 0.1 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 21NOV2007 CHK 21NOV2007 APVD 21NOV2007 C. VALENTINE E. BRIGHT E. BRIGHT TE Connectivity NAME PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING SIZE 1X3 CAGE ASSEMBLY, W/ LIGHT PIPE BRACKET, BEHIND BEZEL, QSFP CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 2007473 SCALE 3:1 SHEET 4 OF - 4 REV D