FKC08W SERIES DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 8 Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 1.25 X 0.80 X 0.40 INCH 24 PIN DIP AND SMD PACKAGE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • COMPLIANCE TO EN50155 AND EN45545-2 RAILWAY STANDARD • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL UVP OCP • RAILWAY SYSTEM • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number FKC08-24S3P3W FKC08-24S05W FKC08-24S12W FKC08-24S15W FKC08-24D05W FKC08-24D12W FKC08-24D15W FKC08-48S3P3W FKC08-48S05W FKC08-48S12W FKC08-48S15W FKC08-48D05W FKC08-48D12W FKC08-48D15W FKC08-110S3P3W FKC08-110S05W FKC08-110S12W FKC08-110S15W FKC08-110D05W FKC08-110D12W FKC08-110D15W otherwise noted Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load VDC 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 mA 2400 1600 666 533 ±800 ±333 ±267 2400 1600 666 533 ±800 ±333 ±267 2400 1600 666 533 ±800 ±333 ±267 mA 40 40 25 25 20 25 25 20 20 13 13 10 13 13 8 8 4 4 5 5 5 % 85 87 86 86 84 86 86 85 87 87 88 84 87 87 84 85 86 86 82 85 85 µF 1330 1330 288 200 ±900 ±133 ±90 1330 1330 288 200 ±900 ±133 ±90 1330 1330 288 200 ±900 ±133 ±90 PART NUMBER STRUCTURE FKC08 - 48 Series Name Input Voltage (VDC) 24: 9~36 48:18~75 110:43~160 S Output Quantity S:Single D: Dual 1 05 W - SMD Output Voltage (VDC) 3P3: 3.3 05: 5 12:12 15:15 Input Range 4:1 Mounting Type Option : DIP type SMD: SMD type 05:± 5 12:±12 15:±15 www.PDUKE.com 2015/8/28 FKC08W INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range 24Vin(nom) 48Vin(nom) 110Vin(nom) 24Vin(nom) 48Vin(nom) 110Vin(nom) 24Vin(nom) 48Vin(nom) 110Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48Vin(nom) 110Vin(nom) Start up voltage Shutdown voltage Start up time Constant resistive load Input surge voltage 100 ms, max. Input reflected ripple current Input filter Remote ON/OFF Referred to –Vin pin Low Line to High Line at Full Load No Load to Full Load DIP type DIP type Asymmetrical load 25%/100% FL 20MHz bandwidth Case material Base material Potting material Weight MTBF 2 -0.5 Min. Single Dual Single Dual Single Dual Single Dual Dual 24Vin(nom) 48Vin(nom) 110Vin(nom) 3.3Vout 5Vout 12Vout 15Vout % of Iout rated 1 minute Conditions DIP type SMD type Isolation resistance Isolation capacitance Switching frequency Safety approvals VDC VDC VDC ms VDC mAp-p Pi type Open or 3.0 ~ 12VDC Short or 0 ~ 1.2VDC +0.5 2.5 Typ. -1.0 -0.2 -0.5 -1.0 -1.0 -1.0 -0.3 -0.8 -0.8 -0.8 -5.0 mA mA Max. Unit +1.0 +0.2 +0.5 +1.0 +1.0 +1.0 +0.3 +0.8 +0.8 +0.8 +5.0 % % 50 50 75 % % mVp-p -0.02 25% load step change Single Output GENERAL SPECIFICATIONS Parameter Isolation voltage Unit 50 100 170 Conditions SMD type Over load protection Short circuit protection 36 75 160 9 18 43 8 16 40 450 5 DC-DC ON DC-DC OFF Input current of Ctrl pin Remote off input current 10% Load to 90% Load Temperature coefficient Transient response recovery time Over voltage protection Max. 24 48 110 Positive logic SMD type Cross regulation Ripple and noise Typ. 9 18 43 20 OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation Min. Input to Output Input (Output) to Case Input to Output Input (Output) to Case 500VDC +0.02 %/ 250 µs 3.9 6.2 VDC 15 18 150 % Continuous, automatics recovery Min. 1600 1600 1600 1000 1 270 MIL-HDBK-217F www.PDUKE.com Typ. Max. Unit VDC GΩ pF 300 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 18g (0.62oz) 2.832 x 106 hrs 1500 330 2015/8/28 FKC08W ENVIRONMENTAL SPECIFICATIONS Parameter Conditions 3.3Vout, ±5Vout Operating ambient temperature(1) Others Maximum case temperature Storage temperature range Thermal impedance Thermal shock Shock Vibration Relative humidity Max. Unit +70 +105 +78 +105 105 +125 /W MIL-STD-810F EN61373, MIL-STD-810F EN61373, MIL-STD-810F 5% to 95% RH 20 Conditions EN55022, EN55011 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 Typ. -40 +70 -40 +78 -55 Natural convection EMC SPECIFICATIONS Parameter EMI(2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Power frequency magnetic field Min. Without derating With derating Without derating With derating Level Air ± 8kV and Contact ± 6kV 20 V/m ± 2kV ± 2kV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second Class A，Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. Converter can meet the railway T2 and TX temperature requirement. T2: -40 ºC ~ +70 ºC as all models; TX: -40 ºC ~ +85 ºC as power derating to 55% output power. 2. The standard module meets EMI Class A or Class B with external components. For further information, please contact with P-DUKE. 3. An external input filter capacitor is required if the module has to meets EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: : 24Vin/48Vin Nippon chemi-con KY series, 220µF/100V : 110 Vin Nippon chemi-con KXJ series, 150µF/200V CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE FKC08-48S05W Derating Curve 3 FKC08-48S05W Efficiency vs. Input Voltage www.PDUKE.com FKC08-48S05W Efficiency vs. Output Load 2015/8/28 FKC08W MECHANICAL DRAWING DIP type PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11 SMD type NC NC PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11 Others NC NC NC DUAL Ctrl -Vin -Vin PIN SINGLE DUAL 23 22 +Vin +Vin +Vin +Vin Common -Vout 16 14 -Vout +Vout Common +Vout DUAL Ctrl -Vin -Vin PIN SINGLE DUAL 23 22 +Vin +Vin +Vin +Vin Common -Vout NC 16 14 -Vout +Vout Common +Vout 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 4 www.PDUKE.com 2015/8/28