Dialog DA6021 Da6021 highly integrated power management ic for new Datasheet

Product Brief
DA6021 Highly integrated power management IC for new
generation Intel® Atom™ processor
General Description
The DA6021 PMIC is a monolithic single chip power management IC for the next generation Intel® Atom™
processor. It provides all power supplies for tablet PC’s and can also be used in multiple embedded
applications as well as Netbooks and Nettops. It is designed to support platforms based on Intel’s new
Atom processor series, including DDR3 memory and various peripherals.
Integrated power management
Dialog Semiconductor’s new DA6021 uses a single supply voltage at a wide range of input voltage and provides low noise supplies to all SoC voltage domains, DDR3
memory and many peripherals.
The DA6021 integrates 6 high performance low dropout (LDO) voltage regulators using Dialog’s patented Smart Mirror™ technology for very low quiescent current.
It includes 11 internal power switches and the control logic for 9 external switching devices. These include in-rush current control for platform power distribution
simplification. Six fully integrated high efficiency DC-DC buck converters provide current to Intel Atom platform’s various low voltage domains as well as to the
memory and the peripherals. Two buck-boost and one boost converter also supply energy towards the platform. All nine regulators are designed to support external
component height of 1mm. Dependant on the input voltage (single battery cell or 5V DC supply) the buck regulators will run preferably at 6MHz.
Ultra flexible power sequencer
The ultra flexible power sequencer takes care of the complete platform start-up, state-transitioning and power-down procedure. The DA6021 operates autonomously
and reduces the power consumption when entering stand-by or power down mode. The DA6021 is fully programmable and allows adapting to all Intel Atom
processor and platform sequences. The OTP programmed power sequence is copied into operational registers during power-up. Those registers can be overwritten
by EEPROM after initial OTP copy routine or via operational processor.
Auxiliary function
An analogue to digital converter (ADC) with 10-bit resolution combined with a multi-channel input multiplexer is implemented, which allows to measure the input
supply voltage, battery ID, PMIC die temperature as well as 5 battery pack & system temperatures. The number of external components is significantly further reduced
by 16 GPIO’s, 3 channel PWM output signal generators, a multi-input detector with a charger control as well as a programmable IRQ controller.
Features
•
•
•
•
•
•
•
•
•
•
Two high efficiency buck converters with integrated SVID interface
running IMVP-7 protocol. These two quad phase DC/DC regulators
generate the voltages for CPU and graphic cores.
One dual phase buck regulator for memory supply supporting DDR3 L and
LP memory types
3 single phase buck regulators supplying 1.0V, 1.05V and 1.8V towards the
platform
2 buck-boost converters generating 2.85V and 3.3V towards the platform
even if the input supply is down to 2.7V
Boost converter providing 5V towards the USB components
3 LDOs with fixed output voltage
2 LDOs with programmable output voltage
1 push-pull LDO used for DDR3 address line termination
11 integrated power rail switching devices
9 external power rail switching devices controlled by the PMIC
•
•
•
•
•
•
•
•
•
•
Ultra flexible power sequencer programmable via OTP/
EEPROM and register
I2C communication interface
EEPROM interface for optional OTP over-writing
16 general purpose I/Os with alternate functions
16 channel 10-bit ADC including conditioning circuits and programmable
flexible sequencing for automatic and manual measurements
System voltage and temperature monitoring, supervising
Programmable IRQ controller
1-wire digital battery interface including 2-wire conversion
3 channel PWM signal generation, flexible frequency and duty cycle
programmable
Input power source detection, including by charger current control
DA6021 PMIC block diagram
Applications
Key Features
•
•
•
•
•
•
•
•
Tablet PCs
Embedded applications
•
Embedded PCs
•
Vehicle command systems
•
Telematic devices
•
Car navigation systems
•
Mobile internet devices
Netbooks
Nettops
Fully integrated PMIC at smallest footprint and PCB area
Ultra flexible programmable state-machine
Support of various system memory types
Many integrated auxiliary functions reducing external component
count
Package
•
325 pin FCBGA 11x6mm, 0.4mm pitch
Dialog Semiconductor worldwide offices
Germany - Headquarters
Phone: +49 7021 805-0
The Netherlands
Phone: +31 73 640 88 22
Korea
Phone: +82 2 569 2301
Japan
Phone: +81 3 5425 4567
United Kingdom
Phone: +44 1793 757700
North America
Phone: +1 408 727 3200
Singapore
Phone: +65 64845419
Taiwan
Phone: + 886 281 786 222
This publication is issued to provide outline information only, which (unless agreed by Dialog Semiconductor in writing) may not be used, applied or reproduced for
any purpose or form part of any order or contract or be regarded as a representation relating to products or services concerned. Dialog Semiconductor reserves the
right to alter without notice the specification, design, price or conditions of supply of the product. Customer takes note that Dialog Semiconductor’s products are not
designed for use in devices or systems intended for supporting or monitoring life nor for surgical implants into the body. Customer shall notify the company of any
such intended use so that Dialog Semiconductor may determine suitability. Customer agrees to indemnify Dialog Semiconductor for all damages that may be incurred due to use without the company’s prior written permission of products in such applications. © Dialog Semiconductor 2011. All rights reserved.
China
Phone: +852 2607 4271
Similar pages