EPCOS B57350 Ntc thermistors for temperature measurement Datasheet

NTC thermistors for
temperature measurement
Leadless NTCs
Series/Type:
Date:
B57350
March 2006
© EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Temperature measurement
B57350
Leadless NTCs
K350
Applications
Automotive electronics, e.g.
measurement of cooling water
and oil temperature
Dimensional drawing
Features
Front surfaces silver-plated
For clamp contacting
Options
Alternative resistance ratings,
rated temperatures and resistance tolerances
available on request
Delivery mode
Bulk
D = 3.5 ±0.3 mm
L = 1.3 ±0.4 mm
Approx. weight 75 mg
General technical data
Climatic category
Max. power
Resistance tolerance
Rated temperature
Dissipation factor
Thermal cooling time constant
Heat capacity
(IEC 60068-1)
(at 25 °C)
(in air)
(in air)
P25
∆RR/RR
TR
δth1)
τc1)
Cth1)
55/155/21
180
±5
100
approx. 2.5
approx. 18
approx. 45
mW
%
°C
mW/K
s
mJ/K
Electrical specification and ordering codes
R100
Ω
70
R25
Ω
990.2
No. of R/T
characteristic
1009
1) Depends on mounting situation
Please read Important notes and
Cautions and warnings at the end of this document.
Page 2 of 8
B25/100
K
3930 ±1.5%
Ordering code
B57350K0102J000
Temperature measurement
B57350
Leadless NTCs
K350
Reliability data
Test
Standard
Storage in
dry heat
IEC
60068-2-2
Storage in damp
heat, steady state
Rapid temperature
cycling
Endurance
Long-term stability
(empirical value)
Test conditions
Storage at upper
category temperature
T: 155 °C
t: 1000 h
IEC
Temperature of air: 40 °C
60068-2-78 Relative humidity of air: 93%
Duration: 21 days
IEC
Lower test temperature: 55 °C
60068-2-14 Upper test temperature: 155 °C
Number of cycles: 100
Pmax: 180 mW
t: 1000 h
Temperature: 125 °C
t: 10000 h
Please read Important notes and
Cautions and warnings at the end of this document.
Page 3 of 8
∆R25/R25
(typical)
< 3%
Remarks
< 3%
No visible
damage
< 3%
No visible
damage
< 3%
No visible
damage
No visible
damage
< 5%
No visible
damage
Temperature measurement
B57350
Leadless NTCs
K350
R/T characteristics
B57350K0102J000
R/T No.
T (°C)
1009
B25/100 = 3930 K, R25 = 990 Ω, TR = 100 °C, ∆RR/RR = ± 5%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
84586
60186
43222
31319
22892
70820
50755
36700
26767
19686
98352
69616
49745
35872
26098
16.3
15.7
15.1
14.5
14.0
2.4
2.3
2.3
2.3
2.3
6.8
6.7
6.5
6.4
6.2
30.0
25.0
20.0
15.0
10.0
16873
12525
9393
7084
5395
14596
10896
8216
6228
4766
19151
14154
10571
7941
6023
13.5
13.0
12.5
12.1
11.7
2.2
2.2
2.2
2.2
2.2
6.0
5.9
5.7
5.5
5.4
5.0
0.0
5.0
10.0
15.0
4132
3194
2490
1957
1550
3668
2848
2230
1760
1399
4597
3540
2750
2154
1700
11.2
10.8
10.4
10.1
9.7
2.2
2.1
2.1
2.1
2.1
5.2
5.1
4.9
4.8
4.6
20.0
25.0
30.0
35.0
40.0
1236
990.2
801.6
650.8
531.7
1120
900.8
731.9
596.3
488.8
1352
1080
871.4
705.4
574.7
9.4
9.0
8.7
8.4
8.1
2.1
2.1
2.1
2.0
2.0
4.5
4.3
4.2
4.1
4.0
45.0
50.0
55.0
60.0
65.0
437.4
361.8
300.3
250.7
210.6
403.3
334.6
278.6
233.2
196.5
471.4
388.9
322.0
268.1
224.7
7.8
7.5
7.2
6.9
6.7
2.0
2.0
2.0
2.0
1.9
3.9
3.8
3.7
3.5
3.5
70.0
75.0
80.0
85.0
90.0
177.9
150.7
128.2
109.6
94.02
166.4
141.4
120.6
103.3
88.86
189.3
160.0
135.8
115.8
99.18
6.4
6.2
5.9
5.7
5.5
1.9
1.9
1.9
1.8
1.8
3.4
3.3
3.2
3.1
3.0
95.0
100.0
105.0
110.0
115.0
80.98
70.00
60.78
52.96
46.27
76.71
66.50
57.59
50.07
43.65
85.24
73.50
63.98
55.85
48.89
5.3
5.0
5.3
5.5
5.7
1.8
1.7
1.9
2.0
2.1
2.9
2.9
2.8
2.7
2.7
120.0
125.0
130.0
135.0
40.55
35.65
31.44
27.82
38.18
33.50
29.48
26.04
42.93
37.81
33.39
29.60
5.9
6.0
6.2
6.4
2.2
2.4
2.5
2.6
2.6
2.5
2.5
2.4
Please read Important notes and
Cautions and warnings at the end of this document.
Page 4 of 8
Temperature measurement
B57350
Leadless NTCs
K350
B57350K0102J000
R/T No.
T (°C)
140.0
145.0
150.0
155.0
1009
B25/100 = 3930 K, R25 = 990 Ω, TR = 100 °C, ∆RR/RR = ± 5%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
24.69
23.07
26.32
6.6
2.8
21.96
19.58
17.51
20.48
18.22
16.27
Please read Important notes and
Cautions and warnings at the end of this document.
23.44
20.93
18.75
Page 5 of 8
6.8
6.9
7.1
2.9
3.1
3.2
α (%/K)
2.4
2.3
2.3
2.2
Temperature measurement
B57350
Leadless NTCs
K350
Cautions and warnings
General
See "Important notes" at the end of this document.
Storage
Store thermistors only in original packaging. Do not open the package before storage.
Storage conditions in original packaging: storage temperature 25 °C ... +45 °C, relative
humidity ≤75% annual mean, maximum 95%, dew precipitation is inadmissible.
Do not store SMDs where they are exposed to heat or direct sunlight. Otherwise, the packing
material may be deformed or SMDs may stick together, causing problems during mounting.
Avoid contamination of thermistors surface during storage, handling and processing.
Avoid storage of thermistor in harmful environments like corrosive gases (SOx, Cl etc).
After opening the factory seals, such as polyvinyl-sealed packages, use the SMDs as soon as
possible.
Solder thermistors after shipment from EPCOS within the time specified:
SMDs: 12 months
Leaded components: 24 months
Handling
NTC thermistors must not be dropped. Chip-offs must not be caused during handling of NTCs.
Components must not be touched with bare hands. Gloves are recommended.
Avoid contamination of thermistor surface during handling.
Soldering
Use resin-type flux or non-activated flux.
Insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended.
Complete removal of flux is recommended.
Mounting
When NTC thermistors are encapsulated with sealing material or overmolded with plastic
material, the precautions given in chapter “Mounting instructions”, “Sealing, potting and
overmolding” must be observed.
Electrode must not be scratched before/during/after the mounting process.
Contacts and housings used for assembly with thermistor have to be clean before mounting.
During operation, the thermistor’s surface temperature can be very high (ICL). Ensure that
adjacent components are placed at a sufficient distance from the thermistor to allow for proper
cooling ot the thermistors.
Ensure that adjacent materials are designed for operation at temperatures comparable to the
surface temperature of the thermistor. Be sure that surrounding parts and materials can
withstand this temperature.
Make sure that thermistors (ICLs) are adequately ventilated to avoid overheating.
Avoid contamination of thermistor surface during processing.
Please read Important notes and
Cautions and warnings at the end of this document.
Page 6 of 8
Temperature measurement
B57350
Leadless NTCs
K350
Operation
Use thermistors only within the specified operating temperature range.
Use thermistors only within the specified voltage and current ranges (ICLs).
Environmental conditions must not harm the thermistors. Use thermistors only in normal
atmospheric conditions.
Contact of NTC thermistors with any liquids and solvents should be prevented. It must be
ensured that no water enters the NTC thermistor (e.g. through plug terminals). For
measurement purposes (checking the specified resistance vs. temperature), the component
must not be immersed in water but in suitable liquids (e.g. Galden).
Avoid dewing and condensation.
Be sure to provide an appropriate fail-safe function to prevent secondary product damage
caused by malfunction (e.g. use VDR for limitation of overvoltage condition).
Please read Important notes and
Cautions and warnings at the end of this document.
Page 7 of 8
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap,
PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will
be found on the Internet at www.epcos.com/trademarks.
Page 8 of 8
Similar pages