Mitsubishi FU-650SDF-FW1M36 1.5 î¼m cwdm dfb-ld module with singlemode fiber pigtail Datasheet

MAY06 (1/5)
MITSUBISHI (OPTICAL DEVICES)
FU-650SDF-FW1Mxx
1.5 μm CWDM DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
DESCRIPTION
FU-650RDF-FW1Mxx is a 1.55μm DFB-LD Module with
a single-mode fiber pigtail.
This module is designed for use in long haul CWDM
optical communication systems up to 2.5Gb/s.
FEATURES
• Multi-quantum wells (MQW) DFB laser diode
• 1.55μm band of optical emission wavelength
• High-speed response
• Build-in optical isolator
• 4-pin coaxial package
• With photodiode for optical output monitor
APPLICATIONS
2.5Gb/s Long haul coarse WDM (CWDM) optical
communication systems (OC-48, STM-16)
Extended reach datacom applications
ABSOLUTE MAXIMUM RATINGS (Tc=25°C)
Parameter
Symbol
Laser diode
Optical output power
Pf
Forward current
If
Reverse voltage
Vrl
Photodiode
Reverse voltage
Vrd
Forward current
Ifd
Operating case temperature
Tc
Storage temperature
Tstg
Conditions
CW
CW
-
Rating
9
150
2
20
2
-5 ~ +75
-40 ~ +85
Unit
mW
mA
V
V
mA
°C
°C
Mitsubishi Electric Corporation reserves the right to make changes to the products or information contained herein
without notice. No liability is assumed as a result of their use or application.
MITSUBISHI CONFIDENTIAL
MAY06 (2/5)
MITSUBISHI (OPTICAL DEVICES)
FU-650SDF-FW1Mxx
1.5 μm CWDM DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
ELECTRICAL/OPTICAL CHARACTERISTICS
Parameter
Symbol
Threshold current
Ith
Optical output power
at threshold current
Operating current
Pth
Operating voltage
Vop
Modulation Current (Iop-Ith)
(Note 2)
Deferential Efficiency
Imod
Unit
Max.
20
45
100
mA
μW
Differential impedance
Optical output power from
fiber end
Light-emission central
wavelength
Rs
Pf
CW, Pf=4mW, Tc=25°C
CW, APC (Note 1), Tc=75°C
CW, Pf=4mW, Tc=25°C
CW, APC, Tc=75°C
CW, Pf=4mW, Tc=25°C
CW, APC
CW, Pf=4mW, Tc=25°C
CW, APC
CW, nominal
λc
CW, APC
Wavelength temperature
coefficient
Side mode suppression ratio
Rise and fall time (20~80%)
Relative intensity noise
λct
CW, APC
Sr
tr, tf
Nr
CW, APC
(Note 3) (Note 4)
CW, APC, f=1GHz
30
-
45
125
-145
150
-130
dB
psec
dB/Hz
Tracking error (Note 5)
Monitor current
Er
Imon
CW, APC
CW, Pf=4mW, Vrd=5V,
Tc=25°C
Vrd=5V
Vrd=5V, f=1MHz
0.1
0.5
-
1.25
2
dB
mA
16
-
-
0.1
10
dB
μA
pF
Optical isolation
Dark current (PD)
Capacitance (PD)
Iop
(Tc= -5~75°C, unless otherwise noted)
Test Conditions
Limits
Min.
Typ.
CW, Tc=25°C
10
CW
2
CW, Ibias=Ith
-
η
Iso
Id
Ct
-FW1Mx2
-FW1Mx3
-FW1Mx4
-FW1Mx5
-FW1Mx6
-FW1Mx7
-FW1Mx8
-FW1Mx9
20
10
0.1
0.05
3
35
60
1.2
1.6
30
0.13
6
4
55
110
1.5
1.7
45
80
10
mA
1463
1483
1503
1523
1543
1563
1583
1603
-
1470
1490
1510
1530
1550
1570
1590
1610
0.1
1477
1497
1517
1537
1557
1577
1597
1617
0.11
nm
nm
nm
nm
nm
nm
nm
nm
nm/°C
V
mA
mA
Ω
mW
Note 1) “APC” represents operating LD by a constant monitor current for Pf=4mW at Tc=25°C.
Note 2) Modulation current for LD driver shall be less than this “Imod” when the optical extinction ratio is
set around 10dB.
23
Note 3) 2.48832Gb/s NRZ, 2 -1, Pf_ave=2mW, Ibias=Ith, optical return loss from the line should be
greater than 24dB in order to ensure the specified performance.
Note 4) Guaranteed only when the length of LD pins are shorter than 5mm.
Note 5) Er=max|10×log(Pf / Pf@25°C)|
FIBER PIGTAIL SPECIFICATIONS
Parameter
Type
Mode field diameter
Cladding diameter
Secondary coating outer diameter
Connector
Optical return loss of connector
Lfiber
Limits
SM
9.5+/-1
125+/-2
0.9+/-0.1
SC/PC
40 (min)
1000+/-100
Unit
μm
μm
mm
dB
mm
Mitsubishi Electric Corporation reserves the right to make changes to the products or information contained herein
without notice. No liability is assumed as a result of their use or application.
MITSUBISHI CONFIDENTIAL
MAY06 (3/5)
MITSUBISHI (OPTICAL DEVICES)
FU-650SDF-FW1Mxx
1.5 μm CWDM DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
DOCUMENTATION
• Threshold current (Ith) at Tc=25, 75°C
• Operating current (Iop) at Tc=25, 75°C
• Operating voltage (Vop) at Tc=25°C
• Light-emission central wavelength (λc) at Tc=25°C
• Monitor current (Imon) at Tc=25°C
• Optical output power from fiber end (Pf)
TYPE NUMBER INFORMATION
FU-650SDF-FW1M x x
Wavelength: Please see ELECTRICAL/OPTICAL CHARACTERISTICS table.
Flange type:
1 : With horizontal flange
3 : Without flange
Mitsubishi Electric Corporation reserves the right to make changes to the products or information contained herein
without notice. No liability is assumed as a result of their use or application.
MITSUBISHI CONFIDENTIAL
MAY06 (4/5)
MITSUBISHI (OPTICAL DEVICES)
FU-650SDF-FW1Mxx
1.5 μm CWDM DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
OUTLINE DIAGRAM
Note : Telerances unless noted ±0.5 (Unit : mm)
FU-650SDF-FW1M1x
FU-650SDF-FW1M3x
Mitsubishi Electric Corporation reserves the right to make changes to the products or information contained herein
without notice. No liability is assumed as a result of their use or application.
MITSUBISHI CONFIDENTIAL
MAY06 (5/5)
MITSUBISHI (OPTICAL DEVICES)
FU-650SDF-FW1Mxx
1.5 μm CWDM DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
Safety Cautions for Use of Optoelectronic Devices
General:
Although the manufacturer is always striving to improve the reliability of its product, problems and errors may occur with
semiconductor products. Therefore, the user's products are required to be designed with full safety regard to prevent any accidents that
results in injury, death, fire or environmental damage even when semiconductor products happen to error. Especially it is recommended
to take in consideration about redundancy, fire prevention, error prevention safeguards. And the following requirements must be strictly
observed.
Warning!
1. Eye safety : Seminductor laser radiates laser light during operation. Laser light is very dangerous when shot directly into human
eyes. Don't look at laser light directly, or through optics such as a lens. The laser light should be observed using the ITV camera, IRviewer, or other appropriate instruments.
2. Product handling : The product contains GaAs (gallium arsenide). It is safe for regular use, but harmful to the human body if
made into powder or steam. Be sure to avoid dangerous process like smashing, burning, chemical etching. Never put this product in
one's mouth or swallow it.
3. Product disposal : This product must be disposed of as special industrial waste. It is necessary to separate it from general
industrial waste and general garbage.
Handling Cautions for Optoelectronic Devices
1. General:
(1) The products described in this specification are designed and manufactured for use in general communication systems or
electronic devices, unless their applications or reliability are otherwise specified. Therefore, they are not designed or manufactured for
installation in devices or systems that may affect human life or that are used in social infrastructure requiring high reliability.
(2) When the customer is considering to use the products in special applications, such as transportation systems (automobiles, trains,
vessels), medical equipments, aerospace, nuclear power control, and submarine repeaters or systems, please contact Mitsubishi
Electric or an authorized distributor.
2. Shipping Conditions:
(1) During shipment, place the packing boxes in the correct direction, and fix them firmly to keep them immovable. Placing the boxes
upside down, tilting, or applying abnormal pressure onto them may cause deformation in the electrode terminals, breaking of optical
fiber, or other problems.
(2) Never throw or drop the packing boxes. Hard impact on the boxes may cause break of the devices.
(3) Take strict precautions to keep the devices dry when shipping under rain or snow.
3. Storage Conditions:
When storing the products, it is recommended to store them following the conditions described below without opening the packing. Not
taking enough care in storing may result in defects in electrical characteristics, soldering quality, visual appearance, and so on. The
main points are described below (if special storage conditions are given to the product in the specification sheet, they have priority over
the following general cautions):
(1) Appropriate temperature and humidity conditions, i.e., temperature range between 5~30°C, and humidity between 40~60 percent
RH, should be maintained in storage locations. Controlling the temperature and humidity within this range is particularly important in
case of long-term storage for six months or more.
(2) The atmosphere should be particularly free from toxic gases and dust.
(3) Do not apply any load on the product.
(4) Do not cut or bend the leads of the devices which are to be stored. This is to prevent corrosion in the cut or bent part of the lead
causing soldering problems in the customer’s assembling process.
(5) Sudden change in temperature may cause condensation in the product or packing, therefore, such locations should be avoided for
storing. Temperature in storage locations should be stable.
(6) When storing ceramic package products for extended periods of time, the leads may turn reddish due to reaction with sulfur in the
atmosphere.
(7) Storage conditions for bare chip and unsealed products shall be stated separately because bare chip and unsealed products
require stricter controls than package sealed products.
4. Design Conditions and Environment under Use:
(1) Avoid use in locations where water or organic solvents adhere directly to the product, or where there is any possibility of the
generation of corrosive gas, explosive gas, dust, salinity, or other troublesome conditions. Such environments will not only significantly
lower the reliability, but also may lead to serious accidents.
(2) Operation in excess of the absolute maximum ratings can cause permanent damage to the device. The customers are requested
to design not to exceed those ratings even for a short time.
5. ESD Safety Cautions:
The optoelectronic devices are sensitive to static electricity (ESD, electro-static discharge). The product can be broken by ESD. When
handling this product, please observe the following countermeasures:
<Countermeasures against Static Electricity and Surge>
To prevent break of devices by static electricity or surge, please adopt the following countermeasures in the assembly line:
(1) Ground all equipments, machinery jigs, and tools in the process line with earth wires installed in them. Take particular care with hot
plates, solder irons and other items for which the commercial power supplies are prone to leakage.
(2) Workers should always use earth bands. Use of antistatic clothing, electric conductive shoes, and other safety equipment while at
work is highly recommended.
(3) Use conductive materials for this product’s container, etc.
(4) It is recommended that grounding mats be placed on the surfaces of assembly line workbench and the surrounding floor in work
area, etc.
(5) When mounting this product in parts or materials which can be electrically charged (printed wiring boards, plastic products, etc.),
pay close attention to the static electricity in those parts. ESD may damage the product.
(6) Humidity in working environment should be controlled to be 40 percent RH or higher.
These countermeasures are most general, and there is a need to carefully confirm the line before starting mass production using this
product (in the trial production, etc.). It is extremely important to prevent surge, eliminate it rapidly, and prevent it from spreading.
Mitsubishi Electric Corporation reserves the right to make changes to the products or information contained herein
without notice. No liability is assumed as a result of their use or application.
MITSUBISHI CONFIDENTIAL
Similar pages