Astrodyne MPS45-5 45w single output for medical type Datasheet

MPS45
45W S i n g l e Ou t p ut f or M edi c al Ty pe
series
Universal AC input
Low leakage current ≤ 0.3mA
Protections: Short circuit / Overload / Over voltage / Over
temperature
Fixed switching frequency at 45KHz
Cooling by free air convection
Model Number
Output Volts
MPS45-3.3
MPS45-5
MPS45-7.5
MPS45-12
MPS45-13.5
MPS45-15
MPS45-24
MPS45-27
MPS45-48
3.3 Volts(DC)
5 Volts(DC)
7.5 Volts(DC)
12 Volts(DC)
13.5 Volts(DC)
15 Volts(DC)
24 Volts(DC)
27 Volts(DC)
48 Volts(DC)
SINGLE OUTPUT
Output Amps
8.0 Amps
8.0 Amps
5.4 Amps
3.7 Amps
3.3 Amps
3.0 Amps
1.9 Amps
1.7 Amps
1.0 Amps
WWW.ASTRODYNETDI.COM
Ripple & Noise
80mV pk-pk
100mV pk-pk
100mV pk-pk
100mV pk-pk
100mV pk-pk
100mV pk-pk
100mV pk-pk
100mV pk-pk
100mV pk-pk
Line Reg Load Reg Tolerance Min Load
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±3.0%
±3.0%
±3.0%
±2.0%
±2.0%
±2.0%
±2.0%
±2.0%
±2.0%
±3.0%
±3.0%
±3.0%
±2.0%
±2.0%
±2.0%
±2.0%
±2.0%
±2.0%
0~10.7 Amps
0~10.5 Amps
0~7 Amps
0~4.4 Amps
0~3.9 Amps
0~3.5 Amps
0~2.2 Amps
0~1.95 Amps
0~1.1 Amps
Efficiency
65%
72%
75%
76%
76%
77%
78%
78%
78%
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
MPS45
45W S i n g l e Ou t p ut f or M edi c al Ty pe
INPUT SPECIFICATIONS
Input Voltage Range
Frequency Range
Inrush Current, typ: (cold start)
Input Current
Leakage current
90-264VAC / 127-370 Volts(DC)
47-440 Hz
15 Amps @ 115VAC Input
30 Amps @ 230VAC
1.2 Amps max @ 115VAC
0.7 Amps max @ 230VAC
< 0.3mA / 230VAC
OUTPUT SPECIFICATIONS
Voltage and Current
Line Regulation
Load Regulation
Voltage Tolerance (Note 2)
Ripple/Noise (Note 1)
Hold Up Time @ FL
Setup, Rise Time @ FL
Over Temperature Protection
Over Voltage Protection
Over Current Protection
DC Voltage Adjust
See Selection Chart
See Selection Chart See Selection Chart
See Selection Chart
See Selection Chart
50mS @ 230VAC
16mS @ 115VAC
800mS, 30mS/230VAC
1200mS. 30mS/115VAC
Tj 135°C typ. (U1) detect on main conrol IC, auto recover
115~135%
Hiccup mode, auto recover
53~75W rated output power
36~55W (3.3Volts DC)
Hiccup mode, auto recover
±10%
GENERAL SPECIFICATIONS
Safety
Insulation Resistance
EMI
Harmonic Current
UL2601-1
TUV EN60601-1
IEC60601-1 approved
≥ 100MΩ / 500 Volts(DC)
Compliance to EN55011 (CISPR11) Class B
Compliance to EN61000-3-2,-3
series
Efficiency
See Selection Chart
Isolation
4000VAC Input - Output
1500VAC Input - Ground
500VAC Output - Ground
EMS
Compliance to
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2,
medical level, criteria A
ENVIRONMENTAL SPECIFICATIONS
Oper. Temperature
Storage Temperature
Relative Humidity
Temperature Coefficient
MTBF
Vibration
-10°C to +60°C (See Derate Curve)
-20°C to +85°C, 10~95% RH
20 to +90% RH non cond
0.04% / °C (0-50°C)
366.7KHrs min, MIL-HDBK-217F(25°C)
10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes
PHYSICAL SPECIFICATIONS
Size
Millimeters
127 x 76 x 28
Inches
5” x 2.99” x 1.10”
Weight
6.35 oz (180g)
NOTE
1. Ripple and Noise are measured at 20MHz of bandwidth by using a
12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.
2. Tolerance: includes set up tolerance, line regulation and load regulation.
3. Mounting holes M1 and M2 should be grounded for EMI purposes.
All specifications are typical at nominal input, full load, and 25°C unless otherwise noted
WWW.ASTRODYNETDI.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
45W S i n g l e Ou t p ut f or M edi c al Ty pe
WWW.ASTRODYNETDI.COM
MPS45
series
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
45W S i n g l e Ou t p ut f or M edi c al Ty pe
WWW.ASTRODYNETDI.COM
MPS45
series
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
Similar pages