AD ADF5904 4-channel, 24 ghz,receiver downconverter Datasheet

4-Channel, 24 GHz,
Receiver Downconverter
ADF5904
Data Sheet
FEATURES
GENERAL DESCRIPTION
Integrated baluns for single-ended receiver (Rx) inputs and
local oscillator (LO) input
Rx channel gain: 22 dB
Noise figure (NF): 10 dB
P1dB: −10 dBm
LO input range: −8 dBm to +5 dBm
Rx to IF isolation: 30 dB
RF signal bandwidth: 250 MHz
Rx output impedance: 900 Ω differential
LO input buffer: 24 GHz
RF and LO S11 at 50 Ω: −5 dB
Temperature sensor with analog output: ±5°
Electric static distortion (ESD) performance
Human body model (HBM): 1000 V
Charged device model (CDM): 500 V
Qualified for automotive applications
The ADF5904 is a 4-channel, 24 GHz, receiver downconverter.
Each channel contains a single-ended RF input with an on-chip
balun followed by a differential low noise amplifier (LNA) and a
downconverter mixer with differential output buffers. The RF
LO path also has an on-chip balun.
Control of the on-chip registers is through a simple 3-wire
interface.
The ADF5904 comes in a compact 32-lead, 5 mm × 5 mm
LFCSP package.
APPLICATIONS
Automotive radars
Industrial radars
Microwave (µW) radar sensors
FUNCTIONAL BLOCK DIAGRAM
AVDD
RX1_RF
RX2_RF
RX3_RF
RX4_RF
TEMP
SENSOR
BALUN
BALUN
BALUN
BALUN
LNA
LNA
LNA
LNA
ATEST
CE
CLK
DATA
LE
32-BIT DATA
REGISTER
DOUT
LO_IN
BALUN
12885-001
RX4_O
RX4_OB
RX3_O
RX3_OB
RX2_O
RX2_OB
RX1_O
GND
RX1_OB
ADF5904
Figure 1.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADF5904
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Input Shift Register .......................................................................9
Applications ....................................................................................... 1
Program Modes .............................................................................9
General Description ......................................................................... 1
Register Map ................................................................................... 10
Functional Block Diagram .............................................................. 1
Register 0 ..................................................................................... 11
Revision History ............................................................................... 2
Register 1 ..................................................................................... 12
Specifications..................................................................................... 3
Register 2 ..................................................................................... 12
Timing Characteristics ................................................................ 4
Initialization Sequence .............................................................. 13
Absolute Maximum Ratings............................................................ 5
Temperature Sensor ................................................................... 13
ESD Caution .................................................................................. 5
Application Information ................................................................ 14
Pin Configuration and Function Descriptions ............................. 6
Application of the ADF5904 in FMCW Radar ...................... 14
Typical Performance Characteristics ............................................. 7
Outline Dimensions ....................................................................... 15
Theory of Operation ........................................................................ 9
Ordering Guide .......................................................................... 15
RF Path ........................................................................................... 9
Automotive Products ................................................................. 15
LO Path .......................................................................................... 9
REVISION HISTORY
3/15—Revision 0: Initial Version
Rev. 0 | Page 2 of 15
Data Sheet
ADF5904
SPECIFICATIONS
AVDD = 3.3 V ± 5%, GND = 0 V, dBm referred to 50 Ω, TA = TMAX to TMIN, unless otherwise noted. Operating temperature range is −40°C
to +105°C.
Table 1.
Parameter
OPERATING CONDITIONS
LO and RF Frequency Range
LO INPUT
Input Return Loss (S11)
LO Input Level
BASEBAND OUTPUTS
Voltage Conversion Gain
Demodulation Bandwidth
Output DC Offset (Differential)
Output Common Mode
Output Swing
Channel to Channel Phase Mismatch over
Temperature
DYNAMIC PERFORMANCE, RF = 24.125 GHz
Conversion Gain
Input P1dB
RF Input Return Loss
Second-Order Input Intercept
Third-Order Input Intercept
LO to RF Isolation
RF to IF Isolation
Noise Figure
Noise Figure Under Blocking Conditions
LOGIC INPUTS
Input Voltage
High
Low
Input Current
Input Capacitance
LOGIC OUTPUTS
Output Voltage
High
Low
Output Current
High
Low
TEMPERATURE SENSOR
Analog Accuracy
Sensitivity
POWER SUPPLIES
AVDD
Power-Down Current
Symbol
Min
Typ
24
−8
IIP2
IIP3
VIH
VIL
IINH, IINL
CIN
1.4
VOH
VDD − 0.4
−5
−5
Max
Unit
24.25
GHz
+5
dB
dBm
22
10
±20
AVDD − 1.0
2
±5
dB
MHz
mV
V
V peak
Degrees
22
−10
−5
20
0
30
30
10
15
dB
dBm
dB
dBm
dBm
dB
dB
dB
dB
0.6
±1
10
Measured differentially
Maximum capacitance = 10 pF
Differential 900 Ω load
Terminated in 50 Ω
Double sideband (DSB) at 100 kHz
With a −30 dBm input interferer at
5 MHz offset from carrier (DSB)
V
V
µA
pF
V
VOL
0.4
V
IOH
IOL
500
500
µA
µA
±5
4.243
°C
mV/°C
170
100
mA
µA
Rev. 0 | Page 3 of 15
Test Conditions/Comments
VDD selected from the DOUT VSEL
bit (Bit DB8, Register 0)
Following one-point calibration
ADF5904
Data Sheet
TIMING CHARACTERISTICS
AVDD = 3.3 V ± 5%, GND = 0 V, dBm referred to 50 Ω, TA = TMAX to TMIN, unless otherwise noted. Operating temperature range is −40°C
to +105°C.
Table 2.
Parameter
t1
t2
t3
t4
t5
t6
t7
t8
t9
Limit at TMIN to TMAX
20
10
10
25
25
10
20
10
15
Unit
ns min
ns min
ns min
ns min
ns min
ns min
ns min
ns max
ns max
Description
LE setup time
DATA to CLK setup time
DATA to CLK hold time
CLK high duration
CLK low duration
CLK to LE setup time
LE pulse width
LE setup time to DOUT
CLK setup time to DOUT
Timing Diagrams
t4
t5
CLK
t2
DATA
t3
DB30
DB31 (MSB)
DB2
(CONTROL BIT C3)
DB1
(CONTROL BIT C2)
DB0 (LSB)
(CONTROL BIT C1)
t7
LE
t1
t6
DB31
(MSB)
DOUT
DB30
DB1
DB0
12885-002
t8
t9
Figure 2. Timing Diagram
500µA
IOL
TO DOUT PIN
VDD/2
500µA
IOH
12885-003
CL
10pF
Figure 3. Load Circuit for DOUT Timing, CL = 10 pF
Rev. 0 | Page 4 of 15
Data Sheet
ADF5904
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
AVDD to GND
Digital Input/Output Voltage to GND
Analog Input/Output Voltage to GND
RXx_RF, LO_IN to GND
Operating Temperature Range
Storage Temperature Range
Maximum Junction Temperature
θJA Thermal Impedance1 (Paddle Soldered)
Reflow Soldering
Peak Temperature
Time at Peak Temperature
Transistor Count
CMOS
Bipolar
ESD
CDM
HBM
1
Rating
–0.3 V to +3.9 V
–0.3 V to AVDD + 0.3 V
–0.3 V to AVDD + 0.3 V
–0.3 V to AVDD + 0.3 V
–40°C to +105°C
–65°C to +125°C
150°C
40.83°C/W
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
ESD CAUTION
260°C
40 sec
65,100
2280
500 V
1000 V
Two signal planes (that is, on the top and the bottom surfaces of the board),
two buried planes, and nine vias.
Rev. 0 | Page 5 of 15
ADF5904
Data Sheet
32
31
30
29
28
27
26
25
RX1_O
RX1_OB
GND
LO_IN
GND
AVDD
RX3_OB
RX3_O
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
1
2
3
4
5
6
7
8
ADF5904
TOP VIEW
(Not to Scale)
24
23
22
21
20
19
18
17
GND
RX3_RF
GND
AVDD
GND
RX4_RF
GND
RX4_O
NOTES
1. THE LFCSP HAS AN EXPOSED PAD
THAT MUST BE CONNECTED TO GND.
12885-004
RX2_OB
LE
CLK
DATA
CE
DOUT
ATEST
RX4_OB
9
10
11
12
13
14
15
16
GND
RX1_RF
GND
AVDD
GND
RX2_RF
GND
RX2_O
Figure 4. Pin Configuration
Table 4. Pin Function Descriptions
Pin No.
1, 3, 5, 7, 18, 20,
22, 24, 28, 30
2
4, 21, 27
Mnemonic
GND
Description
Ground Pins.
RX1_RF
AVDD
6
8
9
10
RX2_RF
RX2_O
RX2_OB
LE
11
CLK
12
DATA
13
14
15
16
17
19
23
25
26
29
31
32
CE
DOUT
ATEST
RX4_OB
RX4_O
RX4_RF
RX3_RF
RX3_O
RX3_OB
LO_IN
RX1_OB
RX1_O
EPAD
Channel 1 RF Input.
Analog Power Supply. The supply range is 3.3 V ± 5%. Place decoupling capacitors (0.1 µF, 1 nF, and 10 pF)
to the ground plane as close as possible to this pin.
Channel 2 RF Input.
Channel 2 Baseband Output.
Channel 2 Complementary Baseband Output.
Load Enable, CMOS Input. When LE goes high, data stored in the shift registers is loaded into one of the
four latches; the control bits select the latch.
Serial Clock Input. This serial clock clocks in the serial data to the registers. Data latches into the 32-bit
shift register on the CLK rising edge. This input is a high impedance CMOS input.
Serial Data Input. The serial data loads MSB first and the two LSBs are the control bits.
This input is a high impedance CMOS input.
Chip Enable. A logic low on this pin powers down the device.
Serial Data Output.
Analog Test Output
Channel 4 Complementary Baseband Output.
Channel 4 Baseband Output.
Channel 4 RF Input.
Channel 3 RF Input.
Channel 3 Baseband Output.
Channel 3 Complementary Baseband Output.
Local Oscillator Input.
Channel 1 Complementary Baseband Output.
Channel 1 Baseband Output.
Exposed Pad. The LFCSP has an exposed pad that must be connected to GND.
Rev. 0 | Page 6 of 15
Data Sheet
ADF5904
TYPICAL PERFORMANCE CHARACTERISTICS
30
10
1
0.1
–35
–30
–25
–20
–15
–10
–5
0
RF INPUT POWER (dBm)
–40°C
+25°C
+105°C
0
23.90 23.95 24.00 24.05 24.10 24.15 24.20 24.25 24.30 24.35
RF FREQUENCY (Hz)
Figure 8. Channel Gain vs. RF Frequency,
Rx Input = −50 dBm, LO Power = −5 dBm, and IF Frequency = 100 kHz
30
25
25
CHANNEL GAIN (dB)
30
20
15
10
–40°C
+25°C
+105°C
5
0
–50
–45
–40
–35
–30
–25
–20
–15
–10
–5
20
15
10
–40°C
+25°C
+105°C
5
0
RF INPUT POWER (dBm)
0
–20
12885-006
–15
–10
–5
LO INPUT POWER (dB)
0
5
Figure 9. Channel Gain vs. LO Input Power, Rx Input = −50 dBm,
LO Frequency = 24 GHz, and IF Frequency = 100 kHz
Figure 6. Conversion Gain vs. RF Input Power,
LO Frequency = 24 GHz at −5 dBm, and IF Frequency = 100 kHz
20
15
18
10
16
5
14
NOISE FIGURE (dB)
20
0
–5
–10
–15
12
10
8
6
–20
4
–25
–40°C
+25°C
+105°C
–35
–50
–45
–40
–35
–30
–25
–20
–15
–10
–5
–40°C
+25°C
+105°C
2
0
RF INPUT POWER (dBm)
Figure 7. IF Output Power vs. RF Input Power,
LO Frequency = 24 GHz at −5 dBm, and IF Frequency = 100 kHz
0
10k
12885-007
–30
100k
1M
IF FREQUENCY (Hz)
10M
12885-010
CONVERSION GAIN (dB)
Figure 5. IF Output Power vs. RF Input Power,
LO Frequency = 24 GHz at −5 dBm and IF Frequency = 100 kHz
IF OUTPUT POWER (dBm)
10
12885-009
–40
12885-005
–45
15
5
–40°C
+25°C
+105°C
0.01
–50
20
12885-008
CHANNEL GAIN (dB)
IF OUTPUT POWER (V p-p)
25
Figure 10. Noise Figure vs. IF Frequency, LO Frequency = 24.125 GHz at −5 dBm
Rev. 0 | Page 7 of 15
ADF5904
Data Sheet
30
20
OP1dB
15
25
10
5
GAIN (dB)
0
10
IP1dB
–5
15
5
–10
1k
10k
100k
12885-011
–15
10M
1M
IF FREQUENCY (Hz)
–40°C
+25°C
+105°C
0
100
1k
10k
100k
1M
12855-013
P1dB (dBm)
20
–40°C
+25°C
+105°C
10M
IF FREQUENCY (Hz)
Figure 13. Gain vs. IF Frequency, Rx Power = −50 dBm and
LO Frequency = 24 GHz at −5 dBm
Figure 11. P1dB vs. IF Frequency, LO Frequency = 24 GHz at −5 dBm
1.8
50
40
IIP3 5dBm
1.7
30
1.6
10
1.5
0
VATEST (V)
OUTPUT POWER (dBm)
20
–10
–20
–30
–40
–50
1.4
1.3
1.2
1.1
–60
1.0
–70
–80
0.9
–35
–30
–25
–20
–15
–10
INPUT POWER (dBm)
–5
0
5
10
0.8
12885-012
–100
–40
–40
–20
0
20
40
60
80
100
TEMPERATURE (°C)
Figure 12. Output Power vs. Input Power, IIP3 LO Frequency = 24.125 GHz at
−5 dBm, Rx Frequency = LO + 100 kHz and LO + 200 kHz
Rev. 0 | Page 8 of 15
Figure 14. Temperature Sensor Voltage on ATEST
120
12885-014
–90
Data Sheet
ADF5904
THEORY OF OPERATION
RF PATH
INPUT SHIFT REGISTER
The ADF5904 contains four identical 24 GHz downconverter
channels. Each channel contains a balun that converts the
single-ended input into a differential signal for the rest of the
downconverter path (see Figure 15). This balun is followed by
a LNA that feeds the downconverter mixer.
The ADF5904 digital section includes power-down bits and test
modes to read back registers. Data is clocked into the 32-bit
input shift register on each rising edge of CLK. The data is
clocked in MSB first. Data is transferred from the input shift
register to one of four latches on the rising edge of LE. The
destination latch is determined by the state of the two control
bits (C2 and C1) in the input shift register. These are the two
LSBs (DB1 and DB0, respectively), as shown in Table 5. The
truth table for these bits is shown in Table 5. Figure 18 to Figure 20
show a summary of how the latches are programmed.
AVDD
GND
PROGRAM MODES
AVDD
Table 5 and Figure 18 through Figure 20 show how to set up the
program modes in the ADF5904.
RXx_RF
Table 5. C1 and C2 Truth Table
BALUN
Control Bits
AVDD
2kΩ
2kΩ
12885-015
GND
Figure 15. RF Input Stage
C2 (DB1)
C1 (DB0)
Register
0
0
1
1
0
1
0
1
R0
R1
R2
R3
LO PATH
The four downconverter channels share the same LO path. The
LO path contains a balun that converts the single-ended input
to a differential signal to drive the mixer (see Figure 16).
AVDD
GND
AVDD
20Ω
20Ω
400Ω
400Ω
LO_IN
BALUN
AVDD
12885-016
GND
Figure 16. LO Input Stage
Rev. 0 | Page 9 of 15
ADF5904
Data Sheet
REGISTER MAP
DOUT VSEL
LO PIN BIAS
PUP LO
PUP CH1
PUP CH2
RESERVED
PUP CH3
PUP CH4
REGISTER 0 (R0)
CONTROL
BITS
RESERVED
DB31 DB30 DB29 DB28 DB27 DB26 DB25 DB24 DB23 DB22 DB21 DB20 DB19 DB18 DB17 DB16 DB15 DB14 DB13 DB12 DB11 DB10 DB9 DB8 DB7 DB6 DB5 DB4 DB3
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
PC4
PC3
PC2
PC1
PLO LPB DIO
1
0
1
0
0
DB2
0
DB1
DB0
C2(0) C1(0)
REGISTER 1 (R1)
CHANNEL
SELECT
CONTROL
BITS
RESERVED
DB31 DB30 DB29 DB28 DB27 DB26 DB25 DB24 DB23 DB22 DB21 DB20 DB19 DB18 DB17 DB16 DB15 DB14 DB13 DB12 DB11 DB10 DB9 DB8 DB7 DB6 DB5 DB4 DB3
CS2
CS1
CS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
1
0
0
1
0
0
1
1
DB2
0
DB1
DB0
C2(0) C1(1)
REGISTER 2 (R2)
5-BIT
CHANNEL TEST SELECT
RESERVED
CONTROL
BITS
RESERVED
DB31 DB30 DB29 DB28 DB27 DB26 DB25 DB24 DB23 DB22 DB21 DB20 DB19 DB18 DB17 DB16 DB15 DB14 DB13 DB12 DB11 DB10 DB9 DB8 DB7 DB6 DB5 DB4 DB3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
TC4
TC3
TC2
TC1
TC0
0
0
0
0
0
0
0
DB2
1
DB1
DB0
C2(1) C1(0)
REGISTER 3 (R3)
DB31 DB30 DB29 DB28 DB27 DB26 DB25 DB24 DB23 DB22 DB21 DB20 DB19 DB18 DB17 DB16 DB15 DB14 DB13 DB12 DB11 DB10 DB9 DB8 DB7 DB6 DB5 DB4 DB3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Figure 17. Latch Summary
Rev. 0 | Page 10 of 15
0
0
0
0
0
0
0
0
0
0
DB2
0
DB1
DB0
C2(1) C1(1)
12885-017
CONTROL
BITS
RESERVED
Data Sheet
ADF5904
DOUT VSEL
LO_IN PIN BIAS
PUP LO
PUP CH1
PUP CH2
RESERVED
PUP CH3
PUP CH4
REGISTER 0 (R0)
CONTROL
BITS
RESERVED
DB31 DB30 DB29 DB28 DB27 DB26 DB25 DB24 DB23 DB22 DB21 DB20 DB19 DB18 DB17 DB16 DB15 DB14 DB13 DB12 DB11 DB10 DB9 DB8 DB7 DB6 DB5 DB4 DB3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
PC4
0
1
0
0
PC4
PC3
PC2
PC1
PLO LPB DIO
1
0
1
0
0
DB2
0
DB1
DB0
C2(0) C1(0)
PUP CH4
POWER DOWN
POWER UP
PC3
0
1
PUP CH3
POWER DOWN
POWER UP
PC2
0
1
PUP CH2
POWER DOWN
POWER UP
PC1
0
1
PUP CH1
POWER DOWN
POWER UP
PLO
0
1
DIO
PUP LO
0
1
POWER DOWN
POWER UP
LPB
0
1
DOUT VSEL
3.3V
1.8V
LO_IN PIN BIAS
NO DC BIAS
1.5V DC BIAS
12885-018
1
Figure 18. Register 0
PUP CH1
REGISTER 0
Register 0 Control Bits
With Bits[C2:C1] set to 00, Register R0 is programmed. Figure 18
shows the input data format for programming this register.
DOUT VSEL
DB8 controls the DOUT logic levels. Set this bit to 0 to set the
DOUT logic level to 3.3 V, and set this bit to 1 to sets the
DOUT logic level to 1.8 V.
LO_IN Pin Bias
DB9 controls the dc bias voltage on the LO_IN pin (Pin 29). Set
this bit to 0 to set no dc bias on the LO_IN pin, and set this bit
to 1 to set the dc bias to 1.5 V. AC couple the LO signal to the
LO_IN pin.
PUP LO
DB10 provides the power-up bit for the LO block. Set this bit to
0 to power down the LO block, and set this bit to 1 to return the
LO block to normal operation.
DB11 provides the power-up bit for RF Receiver Channel 1.
Setting this bit to 0 performs a power-down of Channel 1
blocks. Setting this bit to 1 returns Channel 1 blocks to normal
operation.
PUP CH2
DB12 provides the power-up bit for RF Receiver Channel 2. Set
this bit to 0 to power down the Channel 2 blocks, and set this
bit to 1 to return the Channel 2 blocks to normal operation.
PUP CH3
DB13 provides the power-up bit for RF Receiver Channel 3. Set
this bit to 0 to power down the Channel 3 blocks, and set this
bit to 1 to return the Channel 3 blocks to normal operation.
PUP CH4
DB14 provides the power-up bit for RF Receiver Channel 4. Set
this bit to 0 to power down the Channel 4 blocks, and set this
bit to 1 to return the Channel 4 blocks to normal operation.
Rev. 0 | Page 11 of 15
ADF5904
Data Sheet
REGISTER 1 (R1)
CHANNEL
SELECT
CONTROL
BITS
RESERVED
DB31 DB30 DB29 DB28 DB27 DB26 DB25 DB24 DB23 DB22 DB21 DB20 DB19 DB18 DB17 DB16 DB15 DB14 DB13 DB12 DB11 DB10 DB9 DB8 DB7 DB6 DB5 DB4 DB3
CS1
CS0
CS2
CS1
CS0
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
1
0
0
1
0
0
1
1
0
DB1
DB0
C2(0) C1(1)
CHANNE L SELECT
NONE
CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
LO
RESERVED
RESERVED
12885-019
CS2
DB2
Figure 19. Register 1
REGISTER 2 (R2)
5-BIT
CHANNEL TEST SELECT
CONTROL
BITS
RESERVED
DB31 DB30 DB29 DB28 DB27 DB26 DB25 DB24 DB23 DB22 DB21 DB20 DB19 DB18 DB17 DB16 DB15 DB14 DB13 DB12 DB11 DB10 DB9 DB8 DB7 DB6 DB5 DB4 DB3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
TC4
TC3
TC2
TC1
TC0
0
TC4
TC3
TC2
TC1
TC0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
0
0
0
1
0
0
0
0
0
0
0
0
1
0
0
0
1
0
0
0
0
1
1
1
1
x
0
0
1
1
0
0
1
1
0
0
1
1
x
0
1
0
1
0
1
0
1
0
1
0
1
x
0
0
0
0
0
0
DB2
1
DB1
DB0
C2(1) C1(0)
CHANNEL TEST SELECT
NONE SELECTED
TEMPERATURE SENSOR TO ATEST
RESERVED
RESERVED
RESERVED
REGISTER 0 READBACK
REGISTER 1 CHANNEL 1 READBACK
REGISTER 1 CHANNEL 2 READBACK
REGISTER 1 CHANNEL 3 READBACK
REGISTER 1 CHANNEL 4 READBACK
REGISTER 1 LO READBACK
REGISTER 2 READBACK
RESERVED
RESERVED
12855-020
RESERVED
Figure 20. Register 2
REGISTER 2
REGISTER 1
Register 1 Control Bits
Register 2 Control Bits
With Bits[C2:C1] set to 01, Register R1 is programmed.
Register 1 contains the internal controls for the four RF channels
and the LO path. During the initialization sequence, the default
conditions are loaded. See Step 3 to Step 7 in Table 6.
With Bits[C2:C1] set to 10, Register R2 is programmed. Figure 20
shows the input data format for programming this register.
5-Bit Channel Test Select
Bits[DB14:DB10] control the ADF5904 test modes. These bits
allow access to the temperature sensor on the ATEST pin and
the register readback on the DOUT pin. See Figure 20 for the
truth table.
Rev. 0 | Page 12 of 15
Data Sheet
ADF5904
INITIALIZATION SEQUENCE
TEMPERATURE SENSOR
After powering up the device, administer the initialization
sequence in Table 6 to set the register with the code to configure
the device.
The on-chip temperature sensor of the ADF5904 is accessed on
the ATEST pin. The temperature sensor operates over the full
operating temperature range of −40°C to +105°C. To improve
accuracy, conduct a one-point calibration at room temperature
and store the result in the external memory. Convert the ATEST
voltage to temperature by using the following equation:
Table 6. Initialization Sequence
Step
1
2
3
4
5
6
7
8
Register
R3
R2
R1
R1
R1
R1
R1
R0
Hex Code
0x00000003
0x00020406
0x20001499
0x40001499
0x60001499
0x80001499
0xA0000019
0x80007CA0
Description
Reserved
Temperature sensor to ATEST
Configure Channel 1
Configure Channel 2
Configure Channel 3
Configure Channel 4
Configure LO
Power up
Temperature (°C) = (VATEST − VOFF)/VGAIN
where:
VATEST is the voltage on the ATEST pin.
VOFF is the offset voltage and it is 1.212 V.
VGAIN is the voltage gain and it is 4.072 milli (103).
Rev. 0 | Page 13 of 15
ADF5904
Data Sheet
APPLICATION INFORMATION
APPLICATION OF THE ADF5904 IN FMCW RADAR
Figure 21 shows the application of the ADF5904 in a frequency
modulated continuous wave (FMCW) radar system.
In the FMCW radar system, the ADF4159 generates the
sawtooth or triangle ramps necessary for this type of radar to
operate.
The ADF4159 controls the VTUNE pin on the transceiver (Tx)
monolithic microwave integrated circuit (MMIC) and thus the
frequency of the voltage controlled oscillator (VCO) and the Tx
output signal on TXOUT1 or TXOUT2. The LO signal from the
Tx MMIC is fed to the LO input on the ADF5904.
The ADF5904 downconverts the signal from the four receiver
antennas to baseband with the LO signal from the Tx MMIC.
The downconverted baseband signals from the four receiver
channels on the ADF5904 are fed to the ADAR7251 4-channel,
continuous time (CT), Σ-Δ analog-to-digital converter (ADC).
A digital signal processor (DSP) follows the ADC to handle the
target information processing.
LOOP
FILTER
CP
ADF4159
VTUNE
RFINA
AUX
RFINB
AUX
TX_MMIC
TXOUT1
TXOUT2
LO_OUT
LO_IN
RX1_RF
RX2_RF
ADAR7251
RX BASEBAND
ADF5904
RX3_RF
RX4_RF
Figure 21. FMCW Radar with ADF5904
Rev. 0 | Page 14 of 15
12885-021
DSP
Data Sheet
ADF5904
OUTLINE DIMENSIONS
0.30
0.25
0.18
32
25
1
24
0.50
BSC
*3.75
EXPOSED
PAD
3.60 SQ
3.55
17
0.50
0.40
0.30
TOP VIEW
0.80
0.75
0.70
8
16
0.05 MAX
0.02 NOM
COPLANARITY
0.08
0.20 REF
SEATING
PLANE
PIN 1
INDICATOR
9
BOTTOM VIEW
0.25 MIN
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
*COMPLIANT TO JEDEC STANDARDS MO-220-WHHD-5
WITH THE EXCEPTION OF THE EXPOSED PAD DIMENSION.
08-16-2010-B
PIN 1
INDICATOR
5.10
5.00 SQ
4.90
Figure 22. 32-Lead Lead Frame Chip Scale Package [LFCSP_WQ]
5 mm × 5mm Body, Very Very Thin Quad
(CP-32-12)
Dimensions shown in millimeters
ORDERING GUIDE
Model1, 2
ADF5904WCCPZ
ADF5904WCCPZ-RL7
EV-ADF5904SD2Z
1
2
Temperature Range
–40°C to + 105°C
–40°C to +105°C
Package Description
32-Lead Lead Frame Chip Scale Package [LFCSP_WQ]
32-Lead Lead Frame Chip Scale Package [LFCSP_WQ]
Evaluation Board
Package Option
CP-32-12
CP-32-12
Z = RoHS-Compliant Part.
W = Qualified for Automotive Applications.
AUTOMOTIVE PRODUCTS
The ADF5904W models are available with controlled manufacturing to support the quality and reliability requirements of automotive
applications. Note that these automotive models may have specifications that differ from the commercial models; therefore, designers
should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for use in
automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to
obtain the specific Automotive Reliability reports for these models.
©2015 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D12885-0-3/15(0)
Rev. 0 | Page 15 of 15
Similar pages