LIGITEK LG-192HRF-CT-08 Led smd Datasheet

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
LED SMD
Pb
Lead-Free Parts
LG-192HRF-CT-08
DATA SHEET
DOC. NO :
QW0905-LG-192HRF-CT-08
REV
:
C
DATE
:
19 - May. - 2016
發行
立碁電子
DCC
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 1/11
PART NO. LG-192HRF-CT-08
Features:
1. Package in 8.0mm carrier tape on 7" diameter reel.
2. Compatible with automatic placement equipment.
3. Compatible with reflow solder process.
Descriptions:
1. The LG-192 SMD Taping is much smaller than
lead frame type components, thus enable smaller
board size, higher packing density, reduced storage
space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature
applications. etc.
Applications:
1. Automotive : backlighting in dashboard and switch.
2. Telecommunication : indicator and backlighting in telephone and fax.
3. Flat backlight for LCD, switch and symbol
4. General use.
Device Selection Guide:
PART NO
MATERIAL
LG-192HRF-CT-08
AIGaInP
COLOR
Emitted
Lens
Red
Water Clear
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 2/11
PART NO. LG-192HRF-CT-08
Package Dimensions
Cathode Mark
0.4
0.2
0.8
Resin
Cathode
Mark
0.3
LED DICE
1.6
1.0
Soldering
Terminal
1.0 0.6
0.3
PCB
Note : 1.All dimension are in millimeter tolerance is ±0.1mm unless otherwise noted.
2.Specifications are subject to change without notice.
Recommended Soldering Pad Dimensions
0.8
0.8
0.7
0.8
Note : The tolerances unless mentioned is ±0.1mm,Angle ±0.5. Unit=mm.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 3/11
PART NO. LG-192HRF-CT-08
Absolute Maximum Ratings at Ta=25℃
Symbol
Ratings
UNIT
Power Dissipation
PD
60
mW
Peak Forward Current
Duty 1/10@10KHz
IFP
75
mA
Forward Current
IF
25
mA
Reverse Current @5V
Ir
10
μA
Electrostatic Discharge
ESD
2000
V
Operating Temperature
Topr
-40 ~ + 85
℃
Storage Temperature
Tstg
-40 ~ + 100
℃
Parameter
Typical Electrical & Optical Characteristics (Ta=25℃)
Symbol
Min.
Typ.
Luminous Intensity
Iv
32
80
----
mcd
IF=20mA
Dominant Wavelength
λD
----
630
----
nm
IF=20mA
△λ
----
20
----
nm
IF=20mA
VF
1.5
----
2.4
V
IF=20mA
2θ 1/2
----
130
----
deg
IF=20mA
Items
Spectral Line Half-Width
Forward Voltage
Viewing Angle
Max. UNIT
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.
3.The dominant wavelength data did not including ±1nm testing tolerance
CONDITION
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 4/11
PART NO. LG-192HRF-CT-08
Luminous Intensity Classification
BIN CODE
Iv(mcd) at 20mA
Min.
Max.
N
32
50
P
50
80
Q
80
125
R
125
200
Dominant Wavelength Classification
BIN CODE
λD(nm) at 20mA
Min.
Max.
29
624
627
30
627
630
31
630
633
32
633
636
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 5/11
PART NO. LG-192HRF-CT-08
Typical Electro-Optical Characteristics Curve
HRF CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.5
Relative Intensity
Normalize @20mA
Forward Current(mA)
1000
100
10
1.0
3.0
2.5
2.0
1.5
1.0
0.5
0
0.1
1.0
1.5
2.0
2.5
3.0
1.0
10
1000
Forward Current(mA)
Forward Voltage(V)
Fig.3 Forward Current vs. Temperature
Fig.4 Relative Intensity vs. Temperature
40
3.0
30
20
10
0
0
20
40
60
80
100
Relative Intensity@20mA
Normalize@25℃
Forward Current(mA)
100
2.5
2.0
1.5
1.0
0.5
0
-40
-20
-0
20
40
60
80
Ambient Temperature (Ta°C)
Ambient Temperature( ℃)
Relative Intensity@20mA
Fig.5 Relative Intensity vs. Wavelength
Fig.6 Directive Radiation
1.0
0.5
0
550
600
650
Wavelength (nm)
700
130°
100
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 6/11
PART NO. LG-192HRF-CT-08
Carrier Tape Dimensions
2.0
4.0 ±0.2
0.23
1.5
1.75
3.5±0.2
8.0 ±0.3
5.4
1.75
Polarity
0.6
4.0±0.2
0.9
Note : The tolerances unless mentioned is ± 0.1mm,Angle ± 0.5. Unit=mm.
‧ Packing Specifications
Label
Aluminum Moist-Proff bag
Label
Part No.
Description
Quantity/Reel
LG-192HRF-CT-08
8.0mm tape,7"reel
4000 devices
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 7/11
PART NO. LG-192HRF-CT-08
Label Explanation
Pb
LIGITEK ELECTRONICS CO., LTD.
PART :
LG-192HRF-CT-08
BIN : Luminous Intensity
LOT :
GS11410168
HUE : Dominant Wavelength
QTY(PCS):
4000
VF : Forward Voltage
BIN/HUE :
N/29
VF:2.0-2.2
Reel Dimensions
0.2
0.4
0.8
0.8
0.6
0.2
0.4
0.6
2.0±0.5
178 ±1.5
6.0 ±1.0
9.0±1.0
ψ13.5±1.0
12.0±1.0
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 8/11
PART NO. LG-192HRF-CT-08
Box Explanation
1. 5 BAG / INNER BOX
2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm
H
W
L
3. 10 INNER BOXES / CARTON
4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm
L
W
H
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LG-192HRF-CT-08
Page 9/11
Recommended Soldering Conditions
1. Hand Solder
Basic spec is ≦ 280 ℃ 3 sec one time only.
2 PB-Free Reflow Solder
1~5°C/sec
1~5°C/sec
Preheat
180~200°C
260°C MaX. 10sec.Max
6°C/sec
Above 220°C
60 sec.Max.
120 sec.Max.
Note:
1.Reflow soldering should not be done more than two times.
2.When soldering,do not put stress on the LEDs during heating.
3.After soldering,do not warp the circuit board.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 10/11
PART NO. LG-192HRF-CT-08
Precautions For Use:
Storage time:
1. Calculated shelf life before opening is 18 months at < 30°C and < 90% relative humidity (RH)
2. After bag is opened, devices which will be subjected to reflow soldering or other high
temperature processes must be
a) Assemblied within one years in an environment of ≦ 30°C / 60% RH, or
b) Stored at ambient of 10% RH or less
3. Devices are required baking before assembly if:
a) Humidity Indicator Card reads >10% (for level 2a -5a)
or >60% (for level 2) at ambient temperature 23 ±5°C
b) 2.a) or 2.b) doesn't meet
4. If baking is required, devices should be baked for >24 hours at 60±5°C.Performing baking only once,
and using the baked devices within 72 hours..
Drive Method:
LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into
the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series
with the LED.
Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd
current should not be allowed to change by more than 40% of its desired value.
Circuit model A
Circuit model B
LED
LED
(A) Recommended circuit.
(B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
Cleaning:
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
ESD(Electrostatic Discharge):
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 11/11
PART NO. LG-192HRF-CT-08
Reliability Test:
Classification
Test Item
Test Condition
Sample
Size
Operating Life Test
1.Ta=25°C
2.If=20mA
3.t=1000 hrs (-24hrs,+72hrs)
22
High Temperature
Storage Test
1.Ta=100°C±5°C
2.t=1000 hrs (-24hrs,+72hrs)
22
Low Temperature
Storage Test
1.Ta=-40°C±5°C
2.t=1000 hrs (-24hrs,+72hrs)
22
High Temperature
High Humidity
Storage Test
1.Ta=85°C
2.RH=85%
3.t=1000hrs(-24hrs,+72hrs)
22
1.Ta=100°C±5°C ~ -40°C±5°C
20min/ 10sec / 20min
2.total 100 cycles
22
1.100°C±5°C ~ -40°C±5°C
30mins / 5mins / 30mins
2.100 Cyeles
22
Endurance
Test
Thermal Shock Test
Environmental
Test
Temperature
Cycling
IR Reflow
1.T=260°C Max. 10sec.Max.
2. 6 Min
22
Similar pages