Infineon IPP12CN10L Optimosâ®2 power-transistor Datasheet

IPS12CN10L G
IPP12CN10L G
OptiMOS®2 Power-Transistor
Product Summary
Features
• N-channel, logic level
• Excellent gate charge x R DS(on) product (FOM)
VDS
100
V
RDS(on),max
12
mW
ID
69
A
• Very low on-resistance R DS(on)
• 175 °C operating temperature
• Pb-free lead plating; RoHS compliant
• Qualified according to JEDEC1) for target application
• Ideal for high-frequency switching and synchronous rectification
Type
IPP12CN10L G
IPS12CN10L G
Package
PG-TO220-3
PG-TO251-3-11
Marking
12CN10L
12CN10L
Maximum ratings, at T j=25 °C, unless otherwise specified
Parameter
Symbol Conditions
Continuous drain current
ID
Value
T C=25 °C
69
T C=100 °C
49
Pulsed drain current2)
I D,pulse
T C=25 °C
276
Avalanche energy, single pulse
E AS
I D=69 A, R GS=25 W
150
Reverse diode dv /dt
dv /dt
I D=69 A, V DS=80 V,
di /dt =100 A/µs,
T j,max=175 °C
6
Gate source voltage3)
V GS
Power dissipation
P tot
Operating and storage temperature
T j, T stg
T C=25 °C
IEC climatic category; DIN IEC 68-1
1)
Unit
A
mJ
kV/µs
±20
V
125
W
-55 ... 175
°C
55/175/56
J-STD20 and JESD22
2)
see figure 3
3)
Tjmax=150°C and duty cycle D=0.01 for Vgs<-5V
Rev. 1.03
page 1
2011-09-05
IPS12CN10L G
IPP12CN10L G
Parameter
Values
Symbol Conditions
Unit
min.
typ.
max.
-
-
1.2
minimal footprint
-
-
62
6 cm2 cooling area4)
-
-
40
Thermal characteristics
Thermal resistance, junction - case
R thJC
Thermal resistance, junction ambient
R thJA
K/W
Electrical characteristics, at T j=25 °C, unless otherwise specified
Static characteristics
Drain-source breakdown voltage
V (BR)DSS V GS=0 V, I D=1 mA
100
-
-
Gate threshold voltage
V GS(th)
V DS=V GS, I D=83 µA
1.2
1.84
2.4
Zero gate voltage drain current
I DSS
V DS=80 V, V GS=0 V,
T j=25 °C
-
0.1
1
V DS=80 V, V GS=0 V,
T j=125 °C
-
10
100
V
µA
Gate-source leakage current
I GSS
V GS=20 V, V DS=0 V
-
1
100
nA
Drain-source on-state resistance
R DS(on)
V GS=4.5 V, I D=34.5 A,
(TO220)
-
11.7
15.8
mW
V GS=10 V, I D=69 A,
(TO220)
-
9.9
12
V GS=4.5 V, I D=34.5 A,
(TO251)
-
11.7
15.8
V GS=10 V, I D=69 A,
(TO251)
-
9.9
11.8
-
1.3
-
W
57
113
-
S
Gate resistance
RG
Transconductance
g fs
|V DS|>2|I D|R DS(on)max,
I D=69 A
4)
Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm 2 (one layer, 70 µm thick) copper area for drain
connection. PCB is vertical in still air.
Rev. 1.03
page 2
2011-09-05
IPS12CN10L G
IPP12CN10L G
Parameter
Values
Symbol Conditions
Unit
min.
typ.
max.
-
4210
5600
-
528
702
Dynamic characteristics
Input capacitance
C iss
Output capacitance
C oss
Reverse transfer capacitance
C rss
-
29
-
Turn-on delay time
t d(on)
-
14
-
Rise time
tr
-
9
-
Turn-off delay time
t d(off)
-
39
-
Fall time
tf
-
5
-
Gate to source charge
Q gs
-
16
-
Gate to drain charge
Q gd
-
10
-
Switching charge
Q sw
-
13
-
Gate charge total
Qg
-
58
-
Gate plateau voltage
V plateau
-
3.7
-
V
Output charge
Q oss
-
54
-
nC
-
-
69
-
-
276
-
1
1.2
V
-
101
-
ns
-
193
-
nC
V GS=0 V, V DS=50 V,
f =1 MHz
V DD=50 V, V GS=10 V,
I D=34.5 A, R G=1.6 W
pF
ns
Gate Charge Characteristics5)
V DD=50 V, I D=69 A,
V GS=0 to 10 V
V DD=50 V, V GS=0 V
nC
Reverse Diode
Diode continous forward current
IS
Diode pulse current
I S,pulse
Diode forward voltage
V SD
Reverse recovery time
t rr
Reverse recovery charge
Q rr
5)
A
T C=25 °C
V GS=0 V, I F=69 A,
T j=25 °C
V R=50 V, I F=I S,
di F/dt =100 A/µs
See figure 16 for gate charge parameter definition
Rev. 1.03
page 3
2011-09-05
IPS12CN10L G
IPP12CN10L G
1 Power dissipation
2 Drain current
P tot=f(T C)
I D=f(T C); V GS≥10 V
140
80
70
120
60
100
ID [A]
Ptot [W]
50
80
40
60
30
40
20
20
10
0
0
0
50
100
150
200
0
50
TC [°C]
100
150
200
TC [°C]
3 Safe operating area
4 Max. transient thermal impedance
I D=f(V DS); T C=25 °C; D =0
Z thJC=f(t p)
parameter: t p
parameter: D =t p/T
103
101
1 µs
10 µs
102
100
0.5
ZthJC [K/W]
ID [A]
100 µs
1 ms
101
10 ms
0.2
0.1
10-1
DC
0.05
0.02
100
0.01
single pulse
10-1
10-2
10-1
100
101
102
103
VDS [V]
Rev. 1.03
10-5
10-4
10-3
10-2
10-1
100
tp [s]
page 4
2011-09-05
IPS12CN10L G
IPP12CN10L G
5 Typ. output characteristics
6 Typ. drain-source on resistance
I D=f(V DS); T j=25 °C
R DS(on)=f(I D); T j=25 °C
parameter: V GS
parameter: V GS
250
30
10 V
7.5 V
25
5V
200
3.2 V
20
RDS(on) [mW]
4.5 V
ID [A]
150
100
4V
3.5 V
15
4V
4.5 V
10
50
3.5 V
10 V
5
3.2 V
3V
0
0
0
1
2
3
4
5
0
20
40
VDS [V]
60
80
100
ID [A]
7 Typ. transfer characteristics
8 Typ. forward transconductance
I D=f(V GS); |V DS|>2|I D|R DS(on)max
g fs=f(I D); T j=25 °C
parameter: T j
150
160
140
120
100
ID [A]
gfs [S]
100
80
60
50
40
175 °C
20
25 °C
0
0
0
2
4
6
VGS [V]
Rev. 1.03
0
20
40
60
80
100
120
140
ID [A]
page 5
2011-09-05
IPS12CN10L G
IPP12CN10L G
9 Drain-source on-state resistance
10 Typ. gate threshold voltage
R DS(on)=f(T j); I D=69 A; V GS=10 V
V GS(th)=f(T j); V GS=V DS
parameter: I D
30
2.5
25
2
830 µA
20
15
VGS(th) [V]
RDS(on) [mW]
83 µA
1.5
98 %
typ
1
10
0.5
5
0
0
-60
-20
20
60
100
140
180
-60
-20
20
Tj [°C]
60
100
140
180
Tj [°C]
11 Typ. capacitances
12 Forward characteristics of reverse diode
C =f(V DS); V GS=0 V; f =1 MHz
I F=f(V SD)
parameter: T j
104
103
Ciss
Coss
103
102
IF [A]
C [pF]
175 °C, 98%
25 °C, 98%
25 °C
175 °C
Crss
102
101
101
100
0
20
40
60
80
VDS [V]
Rev. 1.03
0
0.5
1
1.5
2
VSD [V]
page 6
2011-09-05
IPS12CN10L G
IPP12CN10L G
13 Avalanche characteristics
14 Typ. gate charge
I AS=f(t AV); R GS=25 W
V GS=f(Q gate); I D=69 A pulsed
parameter: T j(start)
parameter: V DD
100
10
8
25 °C
100 °C
80 V
VGS [V]
IAS [A]
6
150 °C
10
50 V
20 V
4
2
1
0
1
10
100
1000
0
10
tAV [µs]
20
30
40
50
60
Qgate [nC]
15 Drain-source breakdown voltage
16 Gate charge waveforms
V BR(DSS)=f(T j); I D=1 mA
115
V GS
Qg
VBR(DSS) [V]
110
105
V gs(th)
100
95
Q g(th)
Q sw
Q gs
90
-60
-20
20
60
100
140
Q gate
Q gd
180
Tj [°C]
Rev. 1.03
page 7
2011-09-05
IPS12CN10L G
IPP12CN10L G
PG-TO220-3: Outline
Rev. 1.03
page 8
2011-09-05
IPS12CN10L G
IPP12CN10L G
Rev. 1.03
page 9
2011-09-05
IPS12CN10L G
IPP12CN10L G
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2011 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of
conditions or characteristics. With respect to any examples or hints given herein, any typical
values stated herein and/or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please
contact the nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information
on the types in question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with
the express written approval of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-support device or system or to affect
the safety or effectiveness of that device or system. Life support devices or systems are
intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user
or other persons may be endangered.
Rev. 1.03
page 10
2011-09-05
Similar pages