TI1 LM4250CMDA Lm4250 programmable operational amplifier Datasheet

LM4250
LM4250 Programmable Operational Amplifier
Literature Number: SNOSC17A
LM4250
Programmable Operational Amplifier
General Description
Features
The LM4250 and LM4250C are extremely versatile programmable monolithic operational amplifiers. A single external
master bias current setting resistor programs the input bias
current, input offset current, quiescent power consumption,
slew rate, input noise, and the gain-bandwidth product. The
device is a truly general purpose operational amplifier.
The LM4250C is identical to the LM4250 except that the
LM4250C has its performance guaranteed over a 0˚C to
+70˚C temperature range instead of the −55˚C to +125˚C
temperature range of the LM4250.
n
n
n
n
n
n
n
n
± 1V to ± 18V power supply operation
3 nA input offset current
Standby power consumption as low as 500 nW
No frequency compensation required
Programmable electrical characteristics
Offset voltage nulling capability
Can be powered by two flashlight batteries
Short circuit protection
Connection Diagrams
Metal Can Package
Dual-In-Line Package
DS009300-5
Top View
DS009300-2
Top View
X5 Difference Amplifier
500 Nano-Watt X10 Amplifier
DS009300-4
DS009300-3
Quiescent PD = 500 nW
Quiescent PD = 0.6 mW
© 2000 National Semiconductor Corporation
DS009300
www.national.com
LM4250 Programmable Operational Amplifier
August 2000
LM4250
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
(Note 3)
LM4250
LM4250C
± 18V
± 18V
Operating Temp. Range
−55˚C ≤ TA ≤ +125˚C
0˚C ≤ TA ≤ +70˚C
Differential Input Voltage
± 30V
± 15V
± 30V
± 15V
Supply Voltage
Input Voltage (Note 2)
ISET Current
Output Short Circuit Duration
150 nA
150 nA
Continuous
Continuous
150˚C
100˚C
150˚C
100˚C
TJMAX
H-Package
N-Package
J-Package
100˚C
M-Package
100˚C
Power Dissipation at TA = 25˚C
H-Package (Still Air)
(400 LF/Min Air Flow)
500 mW
300 mW
1200 mW
1200 mW
N-Package
J-Package
500 mW
1000 mW
M-Package
600 mW
350 mW
Thermal Resistance (Typical) θJA
H-Package (Still Air)
(400 LF/Min Air Flow)
165˚C/W
65˚C/W
N-Package
J-Package
165˚C/W
65˚C/W
130˚C/W
108˚C/W
M-Package
108˚C/W
190˚C/W
(Typical) θJC
H-Package
Storage Temperature Range
21˚C/W
21˚C/W
−65˚C to +150˚C
−65˚C to +150˚C
Soldering Information
Dual-In-Line Package
Soldering (10 seconds)
260˚C
Small Outline Package
Vapor Phase (60 seconds)
215˚C
Infrared (15 seconds)
220˚C
See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” for other methods of soldering
surface mount devices.
ESD tolerance (Note 4)
800V
Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage
to the device may occur. Operating Ratings indicate conditions for which the
device is functional, but do not guarantee specific performance limits.
Note 2: For supply voltages less than ± 15V, the absolute maximum input
voltage is equal to the supply voltage.
Note 3: Refer to RETS4250X for military specifications.
Note 4: Human body model, 1.5 kΩ in series with 100 pF.
www.national.com
2
LM4250
Resistor Biasing
Set Current Setting Resistor to V−
ISET
VS
0.1 µA
0.5 µA
1.0 µA
5 µA
10 µA
± 1.5V
± 3.0V
± 6.0V
± 9.0V
± 12.0V
± 15.0V
25.6 MΩ
5.04 MΩ
2.5 MΩ
492 kΩ
244 kΩ
55.6 MΩ
11.0 MΩ
5.5 MΩ
1.09 MΩ
544 kΩ
116 MΩ
23.0 MΩ
11.5 MΩ
2.29 MΩ
1.14 MΩ
176 MΩ
35.0 MΩ
17.5 MΩ
3.49 MΩ
1.74 MΩ
236 MΩ
47.0 MΩ
23.5 MΩ
4.69 MΩ
2.34 MΩ
296 MΩ
59.0 MΩ
29.5 MΩ
5.89 MΩ
2.94 MΩ
Electrical Characteristics
LM4250 (−55˚C ≤ TA ≤ +125˚C unless otherwise specified.) TA = TJ
VS = ± 1.5V
Parameter
ISET = 1 µA
Conditions
Min
ISET = 10 µA
Max
Min
Max
VOS
RS ≤ 100 kΩ, TA = 25˚C
3 mV
5 mV
IOS
TA = 25˚C
3 nA
10 nA
Ibias
TA = 25˚C
7.5 nA
50 nA
Large Signal Voltage
RL = 100 kΩ, TA = 25˚C
Gain
VO = ± 0.6V, RL = 10 kΩ
40k
50k
Supply Current
TA = 25˚C
7.5 µA
80 µA
Power Consumption
TA = 25˚C
23 µW
240 µW
VOS
RS ≤ 100 kΩ
4 mV
6 mV
TA = +125˚C
5 nA
10 nA
TA = −55˚C
3 nA
10 nA
IOS
Ibias
7.5 nA
± 0.6V
Input Voltage Range
Large Signal Voltage Gain
VO = ± 0.5V, RL = 100 kΩ
50 nA
± 0.6V
30k
RL = 10 kΩ
Output Voltage Swing
30k
± 0.6V
RL = 100 kΩ
± 0.6V
RL = 10 kΩ
Common Mode Rejection Ratio
RS ≤ 10 kΩ
70 dB
Supply Voltage Rejection Ratio
RS ≤ 10 kΩ
76 dB
Supply Current
70 dB
76 dB
8 µA
90 µA
VS = ± 15V
Parameter
Conditions
ISET = 1 µA
Min
Max
ISET = 10 µA
Min
Max
VOS
RS ≤ 100 kΩ, TA = 25˚C
3 mV
5 mV
IOS
TA = 25˚C
3 nA
10 nA
Ibias
TA = 25˚C
7.5 nA
50 nA
Large Signal Voltage
RL = 100 kΩ, TA = 25˚C
Gain
VO = ± 10V, RL = 10 kΩ
Supply Current
TA = 25˚C
10 µA
90 µA
Power Consumption
TA = 25˚C
300 µW
2.7 mW
VOS
RS ≤ 100 kΩ
4 mV
6 mV
IOS
TA = +125˚C
25 nA
25 nA
TA = −55˚C
3 nA
10 nA
100k
100k
Ibias
7.5 nA
± 13.5V
Input Voltage Range
3
50 nA
± 13.5V
www.national.com
LM4250
Electrical Characteristics
(Continued)
VS = ± 15V
Parameter
Conditions
ISET = 1 µA
Min
Large Signal Voltage
VO = ± 10V, RL = 100 kΩ
Gain
RL = 10 kΩ
Output Voltage Swing
RL = 100 kΩ
ISET = 10 µA
Max
Min
Max
50k
50k
± 12V
± 12V
RL = 10 kΩ
Common Mode Rejection Ratio
RS ≤ 10 kΩ
70 dB
Supply Voltage Rejection Ratio
RS ≤ 10 kΩ
76 dB
Supply Current
Power Consumption
70 dB
76 dB
11 µA
100 µA
330 µW
3 mW
Electrical Characteristics
LM4250C (0˚C ≤ TA ≤ +70˚C unless otherwise specified.) TA = TJ
VS = ± 1.5V
Parameter
ISET = 1 µA
Conditions
Min
ISET = 10 µA
Max
Min
Max
VOS
RS ≤ 100 kΩ, TA = 25˚C
5 mV
6 mV
IOS
TA = 25˚C
6 nA
20 nA
Ibias
TA = 25˚C
10 nA
75 nA
Large Signal Voltage Gain
RL = 100 kΩ, TA = 25˚C
25k
VO = ± 0.6V, RL = 10 kΩ
Supply Current
25k
TA = 25˚C
8 µA
90 µA
Power Consumption
TA = 25˚C
24 µW
270 µW
VOS
RS ≤ 10 kΩ
6.5 mV
7.5 mV
IOS
8 nA
25 nA
Ibias
10 nA
80 nA
± 0.6V
Input Voltage Range
Large Signal Voltage
VO = ± 0.5V, RL = 100 kΩ
Gain
RL = 10 kΩ
Output Voltage Swing
± 0.6V
25k
25k
± 0.6V
RL = 100 kΩ
± 0.6V
RL = 10 kΩ
Common Mode Rejection Ratio
RS ≤ 10 kΩ
70 dB
70 dB
Supply Voltage Rejection Ratio
RS ≤ 10 kΩ
74 dB
74 dB
Supply Current
Power Consumption
8 µA
90 µA
24 µW
270 µW
VS = ± 15V
Parameter
Conditions
ISET = 1 µA
Min
VOS
RS ≤ 100 kΩ, TA = 25˚C
Max
ISET = 10 µA
Min
Max
5 mV
6 mV
IOS
TA = 25˚C
6 nA
20 nA
Ibias
TA = 25˚C
10 nA
75 nA
Large Signal Voltage
RL = 100 kΩ, TA = 25˚C
Gain
VO = ± 10V, RL = 10 kΩ
Supply Current
TA = 25˚C
11 µA
Power Consumption
TA = 25˚C
330 µW
3 mW
VOS
RS ≤ 100 kΩ
6.5 mV
7.5 mV
IOS
8 nA
25 nA
Ibias
10 nA
80 nA
www.national.com
4
60k
60k
100 µA
LM4250
Electrical Characteristics
(Continued)
VS = ± 15V
Parameter
Conditions
ISET = 1 µA
Min
Max
± 13.5V
Input Voltage Range
Large Signal Voltage
VO = ± 10V, RL = 100 kΩ
Gain
RL = 10 kΩ
Output Voltage Swing
RL = 100 kΩ
ISET = 10 µA
Min
Max
± 13.5V
50k
50k
± 12V
± 12V
RL = 10 kΩ
Common Mode Rejection Ratio
RS ≤ 10 kΩ
70 dB
Supply Voltage Rejection Ratio
RS ≤ 10 kΩ
74 dB
Supply Current
Power Consumption
70 dB
74 dB
11 µA
100 µA
330 µW
3 mW
Typical Performance Characteristics
Input Bias Current vs ISET
Input Bias Current vs
Temperature
Input Offset Current vs
Temperature
DS009300-15
DS009300-16
Unnulled Input Offset Voltage
Change vs ISET
Unnulled Input Offset Voltage
Change vs Temperature
DS009300-18
DS009300-17
Peak to Peak Output Voltage
Swing vs Load Resistance
DS009300-20
DS009300-19
5
www.national.com
LM4250
Typical Performance Characteristics
Peak to Peak Output Voltage
Swing vs Supply Voltage
(Continued)
Quiescent Current (Iq) vs
Temperature
Quiescent Current (Iq) vs ISET
DS009300-23
DS009300-21
Slew Rate vs ISET
DS009300-22
Gain Bandwidth Product
vs ISET
Open Loop Voltage Gain
vs ISET
DS009300-24
DS009300-25
Phase Margin vs ISET
Input Noise Current (In) and
Voltage (En) vs Frequency
RSET vs ISET
DS009300-27
DS009300-29
DS009300-28
www.national.com
DS009300-26
6
LM4250
Typical Applications
X5 Difference Amplifier
500 Nano-Watt X10 Amplifier
DS009300-4
DS009300-3
Quiescent PD = 0.6 mW
Quiescent PD = 500 nW
Floating Input Meter Amplifier
100 nA full Scale
DS009300-8
Quiescent PD = 1.8 µW
*Meter movement (0–100 µA, 2 kΩ) marked for 0–100 nA full scale.
7
www.national.com
LM4250
Typical Applications
(Continued)
X100 Instrumentation Amplifier 10 µW
DS009300-9
Note 5: Quiescent PD = 10 µW.
Note 6: R2, R3, R4, R5, R6 and R7 are 1% resistors.
Note 7: R11 and C1 are for DC and AC common mode rejection adjustments.
RSET Connected to V−
RSET Connected to Ground
DS009300-30
DS009300-11
DS009300-10
Transistor Current Sourcing
Biasing
FET Current Sourcing Biasing
DS009300-13
DS009300-12
*R1 limits ISET maximum
www.national.com
8
Offset Null Circuit
DS009300-14
LM4250
Schematic Diagram
DS009300-1
Ordering Information
Temperature Range
Military
Commercial
−55˚C ≤ TA ≤ +125˚C
0˚C ≤ TA ≤ +70˚C
LM4250CN
Package
NSC
Package
Number
8-Pin
N08E
Molded DIP
LM4250CM
8-Pin
LM4250CMX
Surface Mount
M08A
8-Pin
LM4250J-MIL
J08E
Ceramic DIP
LM4250CH
8-Pin
H08C
Metal Can
9
www.national.com
LM4250
Physical Dimensions
inches (millimeters) unless otherwise noted
Metal Can Package (H)
Order Number LM4250CH
NS Package Number H08C
Ceramic Dual-In-Line Package (J)
Order Number LM4250J-MIL
NS Package Number J08A
www.national.com
10
LM4250
Physical Dimensions
inches (millimeters) unless otherwise noted (Continued)
Small Outline Package (M)
Order Number LM4250CM or LM4250CMX
NS Package Number M08A
Molded Dual-In-Line Package (N)
Order Number LM4250CN
NS Package Number N08E
11
www.national.com
LM4250 Programmable Operational Amplifier
Notes
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: [email protected]
www.national.com
National Semiconductor
Europe
Fax: +49 (0) 180-530 85 86
Email: [email protected]
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: [email protected]
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
Communications and Telecom www.ti.com/communications
Amplifiers
amplifier.ti.com
Computers and Peripherals
www.ti.com/computers
Data Converters
dataconverter.ti.com
Consumer Electronics
www.ti.com/consumer-apps
DLP® Products
www.dlp.com
Energy and Lighting
www.ti.com/energy
DSP
dsp.ti.com
Industrial
www.ti.com/industrial
Clocks and Timers
www.ti.com/clocks
Medical
www.ti.com/medical
Interface
interface.ti.com
Security
www.ti.com/security
Logic
logic.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Transportation and Automotive www.ti.com/automotive
Microcontrollers
microcontroller.ti.com
Video and Imaging
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
Wireless Connectivity
www.ti.com/wirelessconnectivity
TI E2E Community Home Page
www.ti.com/video
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
Similar pages