I D LV- 4 5 45W PWM Output LED Driver F M M ■ Features ‧Constant Voltage PWM style output series SELV ■ Applications with frequency 1KHz ‧Plastic housing with class II design ‧Built-in active PFC function ‧No load power consumption<0.5W(Blank-Type) ‧Function options: 2 in 1 dimming (dim-to-off); ‧LED strip lighting ‧Indoor LED lighting ‧LED decorative lighting ‧LED architecture lighting Auxiliary DC output ‧3 years warranty ■ Description IDLV-45 series is a 45W AC/DC LED driver featuring the constant voltage mode PWM style output design. IDLV-45 operates from 90～295VAC and offers models with different rated voltage ranging between 12V and 60V. Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate for -20℃~+85℃ case temperature under free air convection. IDLV-45 is equipped with various function options, such as dimming methodologies, so as to provide the design flexibility for LED lighting system. ■ Model Encoding IDLV - 45 A - 12 Rated output voltage(12/24/36/48/60V) Function options Rated wattage Series name Type Blank A Function 2 in 1 dimming (0~10VDC and 10V PWM) 2 in 1 dimming and Auxiliary DC output Note In Stock In Stock File Name:IDLV-45-SPEC 2017-07-21 I D LV- 4 5 45W PWM Output LED Driver series SPECIFICATION MODEL DC VOLTAGE OUTPUT IDLV-45 -12 IDLV-45 -24 IDLV-45 -36 IDLV-45 -48 IDLV-45 -60 12V 24V 36V 48V 60V RATED CURRENT 3.0A 1.88A 1.25A 0.94A 0.75A RATED POWER 36W 45.12W 45W 45.12W 45W 88% 90% DIMMING RANGE 0~100% VOLTAGE TOLERANCE ±10% PWM FREQUENCY (Typ.) 1KHz(±20%) SETUP TIME Note.3 500ms / 230VAC 1200ms/115VAC AUXILIARY DC OUTPUT Note.4 Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only 127 ~ 417VDC VOLTAGE RANGE Note.2 90 ~ 295VAC (Please refer to "STATIC CHARACTERISTIC" section) INPUT FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) TOTAL HARMONIC DISTORTION THD< 20%(@load≧60%/115VAC,230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION” section) EFFICIENCY (Typ.) 84% 88% 86% AC CURRENT (Typ.) 0.6A / 115VAC INRUSH CURRENT(Typ.) COLD START 30A(twidth=150μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 0.4A / 230VAC 0.3A / 277VAC MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC NO LOAD POWER CONSUMPTION <0.5W for Blank-Type, <1.2W for A-Type SHORT CIRCUIT PROTECTION ENVIRONMENT SAFETY & EMC OVER CURRENT 105 ~ 115% Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. Tcase=-20 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) MAX. CASE TEMP. Tcase=+85℃ 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 40℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL8750,CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3,GB17743,GB17625.1 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV) MTBF OTHERS DIMENSION PACKING NOTE Shut down O/P voltage, re-power on to recovery 386.59Khrs min. MIL-HDBK-217F (25℃) 120*75*25mm (L*W*H) 0.22Kg;54pcs/13Kg/ 0.93CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature. 2. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details. 3. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time. 4. There is no design of short circuit protection for the Auxiliary DC output; this function can not be used when dimming input terminals(DIM+,DIM-) are short circuit or when it is no load or short circuit at output(Vo+,Vo-). 5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. File Name:IDLV-45-SPEC 2017-07-21 I D LV- 4 5 45W PWM Output LED Driver series DIMMING OPERATION ACL ACL ACN ACN TB1 DIM+ DIMVo+ TB2 Vo- ※ Dimming principle for PWM style output Dimming is achieved by varying the duty cycle of the output current. ON Output DC current Duty cycle(%) = T ON T ×100% Output PWM frequency : 1KHz(±20%) OFF Io=0A T ON T ※ 2 in 1 dimming function ◎ Applying additive 0 ~ 10VDC 100% Vo+ Vo- + + - - DIM+ + Additive Voltage - Duty cycle of output current (%) 90% DIM- 80% 70% 60% 50% 40% 30% 20% 10% 0% “DO NOT connect "DIM- to Vo-” 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage ◎ Applying additive 10V PWM signal (frequency range 300~3000Hz): 100% 90% Vo- + + - - DIM+ Additive PWM signal DIM“DO NOT connect "DIM- to Vo-” Duty cycle of output current (%) 80% Vo+ 70% 60% 50% 40% 30% 20% 10% 0% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input Note : 1. Min. duty cycle of output current is about 8% and the output current is not defined when 0%< Iout<8%. 2. The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle. File Name:IDLV-45-SPEC 2017-07-21 I D LV- 4 5 45W PWM Output LED Driver series 100 100 80 80 70 70 60 60 LOAD (%) LOAD (%) OUTPUT LOAD vs TEMPERATURE 40 20 -20 -10 0 10 20 30 40 20 (HORIZONTAL) 40 -20 -10 0 15 30 45 60 85 (HORIZONTAL) Tcase (℃) AMBIENT TEMPERATURE,Ta (℃) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC ※ Tcase at 75℃ 100 for 12V model 90 1.00 80 0.95 for others 277(45W) 0.90 PF LOAD (%) 70 60 230(45W) 115(36W) 0.85 50 0.80 40 0.75 90 100 135 180 200 295 230 50% 60% INPUT VOLTAGE (V) 70% 80% 90% 100% LOAD ※De-rating is needed under low input voltage. TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD IDLV-45 series possess superior working efficiency that up to 90% can be reached in field applications. ※ 60V Model,Tcase at 75℃ ※ 60V Model,Tcase at 75℃ 91% 19.00% THD(%) 15.00% 277(45W) 13.00% 230(45W) 11.00% 115(36W) 9.00% 7.00% 5.00% 50% EFFICIENCY(%) 90% 17.00% 89% 277(45W) 230(45W) 88% 115(36W) 87% 86% 60% 70% LOAD 80% 90% 100% 85% 50% 60% 70% 80% 90% 100% LOAD File Name:IDLV-45-SPEC 2017-07-21 I D LV- 4 5 45W PWM Output LED Driver series BLOCK DIAGRAM fosc : 70~150KHz AUX+(for A-Type) AUX-(for A-Type) RECTIFIERS EMI FILTER & RECTIFIERS I/P POWER SWITCHING O.L.P. RECTIFIERS & FILTER Vo+ VoDIM+ DIM- CURRENT LIMIT DETECTION CIRCUIT PWM&PFC CONTROL MECHANICAL SPECIFICATION Case No.IDLC-45A ※ Blank-Type Unit:mm 120 6.5 ‧ tc : Max. Case Temperature 6.5 1 2 TB1 3 4 tc 30 30 6.5 75 1 2 3 TB2 4 3 25 6.5 Terminal Pin No. Assignment(TB1) Pin No. 1 2 3 4 Assignment ACL ACL ACN ACN Terminal Pin No. Assignment(TB2) Pin No. 1 2 3 4 Assignment DIM+ DIMVo+ Vo- File Name:IDLV-45-SPEC 2017-07-21 I D LV- 4 5 45W PWM Output LED Driver series ※ A-Type 120 6.5 ‧ tc : Max. Case Temperature 6.5 1 2 3 TB1 4 tc 30 30 6.5 75 1 2 3 TB2 4 5 6 3 25 6.5 Terminal Pin No. Assignment(TB1) Pin No. 1 2 3 4 Assignment ACL ACL ACN ACN Terminal Pin No. Assignment(TB2) Pin No. 1 2 3 Assignment DIM+ DIMVo+ Pin No. 4 5 6 Assignment VoAUX+ AUX- INSTALLATION MANUAL Please refer to : http://www.meanwell.com/manual.html File Name:IDLV-45-SPEC 2017-07-21