EAST1616RGBB3 Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Full-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The EAST1616 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Page 1 of 13 Rev. 0.01 DATASHEET EAST1616RGBB3 Device Selection Guide Chip Type Material Emitted Color R6 AlGaInP Brilliant Red GK InGaN Brilliant Green B9 InGaN Blue Resin Color White Diffused Package Outline Dimensions 1 .6 G re e n B lu e 3 1 4 1 .6 2 A n o d e m a rk Red 1 .1 0 .3 5 1 .0 0 .8 F o r r e f lo w s o ld e r in g ( p r o p o s e ) 2 3 0 .5 5 0 .5 5 0 .3 5 0 .5 5 4 0 .5 5 1 0 .8 2 .4 Note: The tolerance unless mentioned is ±0.1mm,unit is mm. Page 2 of 13 Rev. 0.01 DATASHEET EAST1616RGBB3 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V R6:25 Forward Current IF GK:30 mA B9:30 Peak Forward Current (Duty 1/10 @1KHz) R6:60 IFP GK:50 mA B9:50 R6:60 Power Dissipation Pd GK:110 mW B9:110 Electrostatic Discharge(HBM) ESD R6:2000 GK:1000 B9:1000 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Page 3 of 13 V Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Rev. 0.01 DATASHEET EAST1616RGBB3 Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Symbol R6 GK B9 Iv 2θ1/2 λp R6 GK B9 λd R6 GK B9 R6 △ λ GK B9 R6 GK B9 VF Min. Typ. Max. 72 112 180 112 180 285 28.5 45.0 72.0 ----- 130 ----- deg ----- 632 518 468 ----- nm 620 520 ----- 465 IR GK B9 540 Condition mcd 630 nm IF=20mA 475 ----- 20 35 35 ----- nm 1.7 2.7 2.7 2.0 3.3 3.3 2.4 3.7 3.7 V R6 Reverse Current Unit 10 ----- ----- 50 50 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±2nm 3.Tolerance of Forward Voltage ±0.1V Page 4 of 13 Rev. 0.01 DATASHEET EAST1616RGBB3 Bin Range Of Luminous Intensity Chip : R6 Bin Min Max Q 72 112 R 112 180 Bin Min Max R1 112 140 R2 140 180 S1 180 225 S2 225 285 Bin Min Max N 28.5 45.0 P 45.0 72.0 Unit Condition mcd IF=20mA Unit Condition mcd IF=20mA Unit Condition mcd IF=20mA Unit Condition nm IF=20mA Chip : GK Chip : B9 Bin Range Of Dom. Wavelength Chip : GK Bin Min Max 1 520 530 2 530 540 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±2nm Page 5 of 13 Rev. 0.01 DATASHEET EAST1616RGBB3 Typical Electro-Optical Characteristics Curves R6 F o rw a rd C u rre n t v s . F o r w a r d V o lta g e T a = 2 5 °C IF (m A ) 100 75 F o rw a rd C u rre n t R e la tiv e lu m in o u s in te n s ity ( % ) S p e c tr u m D is tr ib u tio n 50 25 40 30 25 20 10 0 500 550 600 650 0 1 .2 700 1000 2 .0 2 .4 2 .8 L u m in o u s In te n s ity v s . A m b ie n t T e m p e r a tu r e F o rw a rd C u rre n t 100 10 1 -6 0 -4 0 -2 0 0 20 40 60 80 100 3 .0 V F (V ) L u m in o u s In te n s ity v s . T a = 2 5 °C 1000 100 10 1 0 10 10 1 10 2 F o r w a r d C u r r e n t IF ( m A ) A m b ie n t T e m p e r a tu r e T a ( ° C ) R a d ia tio n D ia g r a m F o r w a r d C u r r e n t D e r a tin g C u r v e IF ( m A ) 1 .6 F o r w a r d V o lta g e R e la tiv e lu m in o u s in te n s ity ( % ) R e la tiv e lu m in o u s in te n s ity ( % ) W a v e le n g th λ ( n m ) F o rw a rd C u rre n t T a = 2 5 °C 50 0° 50 T a = 2 5 °C 10° 20° 30° 40 30 25 0 .9 20 50° 0 .8 10 0 40° 1 .0 60° 70° 0 .7 0 20 40 60 85 100 80° 90° 0 .5 0 .3 0 .1 0 .2 0 .4 0 .6 A m b ie n t T e m p e r a tu r e T a ( ° C ) Page 6 of 13 Rev. 0.01 DATASHEET EAST1616RGBB3 Typical Electro-Optical Characteristics Curves GK F o rw a rd C u rre n t v s . S p e c tr u m D is tr ib u tio n F o r w a r d V o lta g e I (m A ) 40 F 75 50 25 30 25 20 10 0 400 450 500 550 0 2 .6 600 3 .0 (% ) R e la tiv e lu m in o u s in te n s ity (% ) R e la tiv e lu m in o u s in te n s ity A m b ie n t T e m p e r a tu r e 100 10 1 -6 0 -4 0 -2 0 0 20 40 60 4 .5 V F (V ) 80 100 T a = 2 5 °C f= 1 K H z D u t y = 1 /1 0 100 10 1 10 10 10 F o rw a rd C u rre n t 0° 50 IF ( m A ) T a = 2 5 °C R a d ia tio n D ia g r a m F o r w a r d C u r r e n t D e r a tin g C u r v e I F( m A ) 4 .2 F o rw a rd C u rre n t 1000 A m b ie n t T e m p e r a tu r e T a ( ° C ) F o rw a rd C u rre n t 3 .8 L u m in o u s In te n s ity v s L u m in o u s In te n s ity v s . 1000 3 .4 F o r w a r d V o lta g e W a v e le n g th λ ( n m ) 10° 20° 30° 40 30 40° 1 .0 25 0 .9 20 50° 0 .8 60° 10 70° 0 .7 0 0 20 40 60 85 A m b ie n t T e m p e r a tu r e T a ( ° C ) Page 7 of 13 T a = 2 5 °C 50 F o rw a rd C u rre n t R e la tiv e lu m in o u s in te n s ity (%) T a = 2 5 °C 100 80° 90° 100 0 .5 0 .3 0 .1 0 .2 0 .4 0 .6 Rev. 0.01 DATASHEET EAST1616RGBB3 Typical Electro-Optical Characteristics Curves B9 F o rw a rd C u rre n t v s . S p e c tr u m D is tr ib u tio n IF (m A ) F o rw a rd C u rre n t R e la tiv e lu m in o u s in te n s ity ( % ) 75 50 25 0 F o r w a r d V o lta g e T a = 2 5 °C 100 450 400 500 550 40 30 25 20 10 0 2 .6 600 3 .8 4 .2 L u m in o u s In te n s ity v s . F o rw a rd C u rre n t 100 10 1 -6 0 -4 0 -2 0 0 20 40 60 80 100 1000 4 .5 V F (V ) L u m in o u s In te n s ity v s . T a = 2 5 °C f= 1 K H z D u ty = 1 /1 0 100 10 1 10 1 10 10 2 F o r w a r d C u r r e n t IF ( m A ) R a d ia tio n D ia g r a m F o r w a r d C u r r e n t D e r a tin g C u r v e IF (m A ) 3 .4 A m b ie n t T e m p e r a tu r e A m b ie n t T e m p e r a tu r e T a ( ° C ) F o rw a rd C u rre n t 3 .0 F o r w a r d V o lta g e R e la tiv e lu m in o u s in te n s ity ( % ) R e la tiv e lu m in o u s in te n s ity ( % ) W a v e le n g th λ ( n m ) 1000 T a = 2 5 °C 50 0° 50 T a = 2 5 °C 10° 20° 30° 40 30 25 0 .9 20 50° 0 .8 10 0 40° 1 .0 60° 70° 0 .7 0 20 40 60 85 100 80° 90° 0 .5 0 .3 0 .1 0 .2 0 .4 0 .6 A m b ie n t T e m p e r a tu r e T a ( ° C ) Page 8 of 13 Rev. 0.01 DATASHEET EAST1616RGBB3 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm , Unit = mm Page 9 of 13 Rev. 0.01 DATASHEET EAST1616RGBB3 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerance unless mentioned is ±0.1mm ,unit is mm. Moisture Resistant Packaging L abel Page 10 of 13 A lu m in u m m o is tu r e - p r o o f b a g D e s ic c a n t L abel Rev. 0.01 DATASHEET EAST1616RGBB3 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock 4 5 6 7 Page 11 of 13 High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ Test Sample Hours/Cycles Size Ac/Re 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 1000 Hrs. 1000 Hrs. IF = 20 mA 1000 Hrs. 22 PCS. 0/1 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Rev. 0.01 DATASHEET EAST1616RGBB3 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~ 5 °C / S ec. 260°C . M ax. 10 Sec. M ax. 1~ 5 °C / S ec. P r e - h e a tin g 180~ 200°C 60 Sec. M ax. A bove 220°C 120 Sec. M ax. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Page 12 of 13 Rev. 0.01 DATASHEET EAST1616RGBB3 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. Page 13 of 13 Rev. 0.01