Vishay HL012 Wirewound resistors, industrial power, tubular (hl), non-inductive tubular (nhl) Datasheet

HL, NHL
www.vishay.com
Vishay Dale
Wirewound Resistors, Industrial Power,
Tubular (HL), Non-Inductive Tubular (NHL)
FEATURES
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
• High temperature silicon coating
• Complete welded construction
• Available in non-inductive styles (model NHL)
with Ayrton-Perry winding
• Tight tolerance of 5 % for values above 1 W
• Excellent stability in operation (< 3 % change in
resistance)
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
Available
Available
Available
Available
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HL011
NHL011
HL012
NHL012
HL015
NHL015
HL020
NHL020
HL025
NHL025
HL026
NHL026
HL050
NHL050
HL051
NHL051
HL060
NHL060
HL065
NHL065
HL080
NHL080
HL100
NHL100
HL120
NHL120
HL130
NHL130
HL160
NHL160
HL175
NHL175
HL225
NHL225
HISTORICAL
MODEL
HL-11
NHL-11
HL-12
NHL-12
HL-15
NHL-15
HL-20
NHL-20
HL-25
NHL-25
HL-26
NHL-26
HL-50
NHL-50
HL-51
NHL-51
HL-60
NHL-60
HL-65
NHL-65
HL-80
NHL-80
HL-100
NHL-100
HL-120
NHL-120
HL-130
NHL-130
HL-160
NHL-160
HL-175
NHL-175
HL-225
NHL-225
RESISTANCE RANGE 
±5%
1.0 to 70K
1.0 to 4.7K
1.0 to 58K
1.0 to 3.9K
1.0 to 60K
1.0 to 4.3K
1.0 to 95K
1.0 to 6.8K
1.0 to 115K
1.0 to 8.8K
1.0 to 170K
1.0 to 11.8K
1.0 to 112K
1.0 to 21.5K
1.0 to 124K
1.0 to 22.9K
1.0 to 145K
1.0 to 27.2K
1.0 to 170K
1.0 to 31.4K
1.0 to 190K
1.0 to 38.3K
1.0 to 260K
1.0 to 48.5K
1.0 to 330K
1.0 to 64.1K
1.0 to 380K
1.0 to 70.2K
1.0 to 470K
1.0 to 105K
1.0 to 500K
1.0 to 112K
1.0 to 645K
1.0 to 121K
POWER RATING
P25 °C W
11
12
15
20
25
26
50
51
60
65
80
100
120
130
160
175
225
RESISTANCE RANGE 
± 10 %
0.10 to 70K
1.0 to 4.7K
0.10 to 58K
1.0 to 3.9K
0.10 to 60K
1.0 to 4.3K
0.10 to 95K
1.0 to 6.8K
0.10 to 115K
1.0 to 8.8K
0.10 to 170K
1.0 to 11.8K
0.10 to 112K
1.0 to 21.5K
0.10 to 124K
1.0 to 22.9K
0.10 to 145K
1.0 to 27.2K
0.10 to 170K
1.0 to 31.4K
0.10 to 190K
1.0 to 38.3K
0.10 to 260K
1.0 to 48.5K
0.10 to 330K
1.0 to 64.1K
0.10 to 380K
1.0 to 70.2K
0.10 to 470K
1.0 to 105K
0.10 to 500K
1.0 to 112K
0.10 to 645K
1.0 to 121K
WEIGHT (typical)
g
10.50
6.69
8.64
12.57
20.72
15.34
42.08
51.96
65.64
64.82
121.58
91.37
183.82
192.36
245.86
250.80
309.97
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: NHL10006Z10R00JJ
N
H
L
1
0
0
0
6
Z
GLOBAL
TERMINAL
TERMINAL RESISTANCE
MODEL
DESIGNATION
FINISH
VALUE
R = Decimal
E = Lead
02
NHL100
K = Thousand
(Pb)-free
05
(See “Standard Electrical
10R00 = 10.0 
06
Specifications”
Z = Tin/lead 1K000 = 1 k
07
table above for
N = Nickel
14
additional P/N’s)
15
Historical Part Numbering example: NHL-100-06Z 10  5 % J01
NHL-100
06Z
10 
HISTORICAL MODEL
Revision: 12-Mar-14
TERMINAL/FINISH
1
0
R
0
0
J
J
TOLERANCE
PACKAGING CODE
SPECIAL
J = ± 5.0 %
K = ± 10.0 %
E = Lead (Pb)-free skin pack
J (1) = Skin pack (J01)
(Dash
Number)
(Up to
2 digits)
From 1 to 99
as applicable
Note
(1) Tin/lead for type “Z”, lead (Pb)-free for type “N”
RESISTANCE VALUE
5%
J01
TOLERANCE
PACKAGING
Document Number: 30208
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HL, NHL
www.vishay.com
Vishay Dale
DIMENSIONS in inches [millimeters]
TERMINAL SETBACK
A
O.D.
I.D.
LENGTH
(Includes Coating and Terminal Band)
GLOBAL
MODEL
CORE DIMENSIONS
LENGTH
I.D.
± 0.062
O.D.
± 0.031
[± 1.59]
[± 0.79]
1.750
0.375
0.188
[44.45]
[9.53]
[4.76]
1.750
0.313
0.188
[44.45]
[7.94]
[4.76]
1.500
0.438
0.313
[38.10]
[11.11]
[7.94]
2.000
0.438
0.313
[50.8]
[11.11]
[7.94]
2.000
0.563
0.313
[50.8]
[14.29]
[7.94]
3.000
0.438
0.313
[76.2]
[11.11]
[7.94]
4.000
0.563
0.313
[101.6]
[14.29]
[7.94]
3.500
0.750
0.500
[88.9]
[19.05]
[12.70]
4.000
0.750
0.500
[101.6]
[19.05]
[12.70]
4.500
0.750
0.500
[114.3]
[19.05]
[12.70]
4.000
1.125
0.750
[101.6]
[28.58]
[19.05]
6.500
0.750
0.500
[165.1]
[19.05]
[12.70]
6.000
1.125
0.750
[152.4]
[28.58]
[19.05]
6.500
1.125
0.750
[165.1]
[28.58]
[19.05]
8.000
1.125
0.750
[203.2]
[28.58]
[19.05]
8.500
1.125
0.750
[215.9]
[28.58]
[19.05]
10.500
1.125
0.750
[266.7]
[28.58]
[19.05]
A
(MAX.)
DIMENSIONS in inches [millimeters]
TERMINAL DESIGNATION
TERMINAL
DISTANCE
SETBACK
BETWEEN
± 0.31
TERMINALS STANDARD OPTIONAL
[± 0.79]
(REF.)
0.094
1.187
02
[2.38]
0.094
1.187
05
14
[2.38]
0.094
0.937
02
14
[2.38)
0.094
1.437
02
14
[2.38]
0.094
1.312
06
15
[2.38]
0.094
2.437
02
14
[2.38]
0.094
3.312
06
15
[2.38]
0.125
2.75
06
15
[3.18]
0.125
3.250
06
15
[3.18]
0.125
3.750
06
15
[3.18]
0.219
2.812
07
15
[5.56]
0.125
5.750
06
15
[3.18]
0.219
4.812
07
15
[5.56]
0.219
5.312
07
15
[5.56]
0.219
6.812
07
15
[5.56]
0.219
7.312
07
15
[5.56]
0.219
9.312
07
15
[5.56]
HL011
0.469
NHL011
[11.91]
HL012
0.406
NHL012
[10.32]
HL015
0.563
NHL015
[14.29]
HL020
0.563
NHL020
[14.29]
HL025
0.688
NHL025
[17.46]
HL026
0.563
NHL026
[14.29]
HL050
0.688
NHL050
[17.46]
HL051
0.906
NHL051
[23.02]
HL060
0.906
NHL060
[23.02]
HL065
0.906
NHL065
[23.02]
HL080
1.313
NHL080
[33.34]
HL100
0.906
NHL100
[23.02]
HL120
1.313
NHL120
[33.34]
HL130
1.313
NHL130
[33.34]
HL160
1.313
NHL160
[33.34]
HL175
1.313
NHL175
[33.34]
HL225
1.313
NHL225
[33.34]
Note
(1) Brackets are available for mounting HL series resistors - see Mounting Hardware section.
TERMINAL DIMENSIONS
A
D
C
Style 02
thru 07
A
D
C
B
Styles 14 and 15
DIMENSION
A
B
B
TERMINAL FINISH
C
“E” Finish - 100 % Sn coated steel. “Z” Finish - 60/40 SnPb
coated steel. “N” Finish - Nickel coated steel. Finish for
terminal style 14 and 15 limited to nickel plated steel (N).
D
Revision: 12-Mar-14
BRACKET
TYPES (1)
101, 204, 301
101, 204, 301
101, 203, 301
101, 203, 301
101, 203, 301
101, 203, 301
101, 203, 301
102, 206, 303
102, 206, 303
102, 206, 303
103, 205, 303
102, 206, 303
103, 205, 303
103, 205, 303
103, 205, 303
103, 205, 303
103, 205, 303
TERMINAL STYLE
02
05
06
07
14
15
0.188 0.188 0.250 0.375 0.188 0.250
[4.76] [4.76] [6.35] [9.53] [4.76] [6.35]
0.406 0.438 0.563 0.625 0.563 0.594
[10.32] [11.11] [14.29] [15.88] [14.29] [15.08]
0.093 0.104 0.166 0.173 0.050 0.065
[2.36] [2.64] [4.22] [4.39] [1.27] [1.65]
0.020 0.020 0.020 0.020 0.020 0.031
[0.51] [0.51] [0.51] [0.51] [0.51] [0.79]
Document Number: 30208
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HL, NHL
www.vishay.com
Vishay Dale
MOUNTING HARDWARE
Mounting hardware is available for HL resistors, see HL Brackets and Sliders datasheet for more information:
www.vishay.com/doc?30279
TECHNICAL SPECIFICATIONS
PARAMETER
Temperature Coefficient
UNIT
HL, NHL RESISTOR CHARACTERISTICS
ppm/°C
± 30 for 10  and above; ± 50 for 1  to 9.9 ; ± 90 for 0.1  to 0.99 
Short Time Overload
-
10 x rated power for 5 s
VAC
1000, from terminal to mounting hardware
V
(P x R)1/2
Insulation Resistance

1000 M minimum dry, 100 M minimum after moisture test
Operating Temperature Range
°C
- 55 to + 350
Dielectric Withstanding Voltage
Maximum Working Voltage
MATERIAL SPECIFICATIONS
NHL NON-INDUCTIVE
Element: Copper-nickel alloy of nickel-chrome alloy,
depending on resistance value
Models of equivalent physical and electrical specifications
are available with non-inductive (Ayrton-Perry) winding.
They are identified by adding the letter N to the front of the
HL type designation (NHL225 for example). For NHL models
maximum resistance values are lower, see Standard
Electrical Specifications table.
Core: Ceramic, steatite
Coating: Special high temperature silicone
Standard Terminals: Model “E” terminals are tinned steel
Terminal Bands: Steel
Part Marking: Vishay Dale, model, wattage, value,
tolerance, date code
RATED POWER IN %
DERATING
120
100
80
60
40
20
0
- 65 - 50
0
50
150
250
350
25
AMBIENT TEMPERATURE IN °C
PERFORMANCE
TEST
CONDITIONS OF TEST
TEST LIMITS
Short Time Overload
Dielectric Withstanding Voltage
Low Temperature Storage
High Temperature Exposure
Humidity
Load Life
Moisture Resistance
Shock, Specified Pulse
Rated power applied until thermally stable, then a minimum of
15 min at - 55 °C
10 x rated power for 5 s
1000 VRMS for 1 min
- 55 °C for 24 h
250 h at + 350 °C
75 °C, 90 % to 100 % RH, 240 h
1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF”
MIL-STD-202 Method 106, 7b not applicable
MIL-STD-202 Method 213, 100 g’s for 6 ms, 10 shocks
± (2.0 % + 0.05 ) R
± (0.1 % + 0.05 ) R
± (2.0 % + 0.05 ) R
± (2.0 % + 0.05 ) R
± (5.0 % + 0.05 ) R
± (3.0 % + 0.05 ) R
± (2.0 % + 0.05 ) R
± (0.2 % + 0.05 ) R
Vibration, High Frequency
Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each
± (0.2 % + 0.05 ) R
Thermal Shock
Revision: 12-Mar-14
± (2.0 % + 0.05 ) R
Document Number: 30208
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages