Fox FXU-PC526R Lvpecl 5 x 3.2mm 2.5v oscillator Datasheet

PRELIMINARY SPECIFICATIONS
Model: FXU-PC52 SERIES
LVPECL 5 x 3.2mm 2.5V Oscillator
Freq: 0.016 MHz to 667 MHz*
Rev. 03/05/2014
Features
ULTRA Low Jitter
Low Cost
XPRESS Delivery
Frequency Resolution to six decimal places
Stabilities to ± 20 PPM
-20 to +70°C or -40 to +85°C operating temperatures
Tri-State Enable / Disable Feature
Industry Standard Package, Footprint & Pin-Out
Fully RoHS compliant
Gold over Nickel Termination Finish
Serial ID with Comprehensive Traceability
V DD
Enable / Disable
FOX
X PRESSO
OUTPUT
ASICs
Applications
 ANY application requiring a high
performance LVPECL oscillator
 SONET
 Ethernet
 Storage Area Network
 Broadband Access
 Microprocessors / DSP / FPGA
 Industrial Controllers
 Test and Measurement Equipment
GND
For more information -- Click on the drawing
Contents
page
Description
The Fox XPRESSO-ULTRA Crystal Oscillator is a
breakthrough in configurable Frequency Control
Solutions. XPRESSO-ULTRA utilizes a family of
proprietary ASICs, designed and developed by Fox,
with a key focus on noise reduction technologies.
The 4th order Delta Sigma Modulator reduces noise to
the levels that are comparable to traditional Bulk
Quartz and SAW oscillators. The ASICs family has
the ability to select the output type and supply
voltage.
With the XPRESSO-ULTRA lead-time, low cost, low
noise, wide frequency range, excellent ambient
performance, XPRESSO-ULTRA is an excellent choice
over the conventional technologies.
Model Selection & Part Number Guide
2
Electrical Characteristic
3
Absolute Maximums
3
Output Wave Characteristics
4
Phase Noise
5
Jitter
5
Pin Assignment
6
Recommended Circuit
6
Reflow
6
Mechanical Drawing and Pad Layout
7
Tape and Reel Specification
8
Label
8
Traceability – LOT Number & Serial Identification 9
Mechanical Test
10
11
Other XPRESSO Series Links
Fox Contact Information
11
Finished XPRESSO-ULTRA parts are 100% final
tested.
Note * – Higher frequencies are available.
Contact Fox Technical Support for details.
Page 1 of 11
Fox Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554
An Integrated Device Technology, Inc. company FOXonline.com
PRELIMINARY SPECIFICATIONS
FXU-PC52 Series
Output Wave Characteristics
Parameters
Low Output Voltage
High Output Voltage
Output Symmetry
@ 50% VP-P Level (See Drawing Below)
Output Enable Note1 (PIN # 1) Voltage
Output DisableNote1 (PIN # 1) Voltage
Cycle Rise Time
(20%~80%VP-P - See Drawing Below)
Cycle Fall Time
(80%~20%VP-P - See Drawing Below)
Note1
Maximum Value
Symbol
Condition
(unless otherwise noted)
VOL
VOH
0.016 MHz to 667 MHz
0.016 MHz to 667 MHz
0.016 MHz to 250 MHz
250+ MHz to 667 MHz
0.6V Typical
1.35V Typical
45% ~ 55% Typical
40% ~ 60% Typical
≥ 70% VDD
≤ 30% VDD
TR
0.016 MHz to 667 MHz
360 pS Typical
TF
0.016 MHz to 667 MHz
250 pS Typical
VIH
VIL
An optional PIN # 2 as Enable / Disable is available – see Model Selection Guide (page 2)
Page 4 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-PC52 Series
Phase Noise (typical measurement at 125 MHz)
.
LVPECL Phase Jitter (typical measurement at 125 MHz)
Phase Jitter (pS)
Frequency
(12kHz to 20MHz)
125 MHz
0.304
Phase Jitter is integrated from Agilent 5052A Signal Noise Analyzer; measured directly into 50 ohm input; VDD = 2.5V.
Page 5 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-PC52 Series
Pin Description and Recommended Circuit
Pin #
Name
1
2
3
4
5
6
E/D
NC
Type
1
Function
Input
Enable / Disable Control of Output (0 = Disabled)
2
No Connection – Leave OPEN
GND
Output
Output 2
VDD
3
Ground
Output
Output
Power
Electrical Ground for VDD
LVPECL Oscillator Output
Complementary LVPECL Output
Power Supply Source Voltage
NOTES:
1
2
3
E/D 1
NC 2
GND 3
Includes pull-up resistor to VDD to provide output when the pin (1) is No Connect. (Also see note 2)
An optional pin # 2 Enable / Disable is available.
Installation should include a 0.01µF bypass capacitor placed between VDD
(Pin 6) and GND (Pin 3) to minimize power supply line noise.
6 VDD
5 Output 2
4 Output
Terminations as viewed from the Top
NOTE: XPRESSO-ULTRA LVPECL XOs are designed to
fit on Industry Standard, 6 pad layouts
Enable / Disable Control
Pin # 1 (state)
Output (Pin # 4, Pin # 5)
OPEN (No Connection)
“1” Level VIH ≥ 70% VDD
“0” Level VIL ≤ 30% VDD
ACTIVE Output
ACTIVE Output
High Impedance
Soldering Reflow Profile
(2 times Maximum at 260°C for 10 seconds MAX)
tp
260°C
225°C
Ramp-Up
3°C/s Max
50±10 Seconds
Above 225°C Reflow Area
180°C
160°C
25°C
10 Seconds Max
within 5°C of 260°C peak
120 ± 20 Seconds
In Pre-heating Area
400 Seconds MAX from +25°C to 260°C peak
Page 6 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
Ramp Down
Not to exceed 6°C/s
PRELIMINARY SPECIFICATIONS
FXU-PC52 Series
Mechanical Dimensional Drawing & Pad Layout
Actual part marking
is depicted.
See Traceability (pg. 9)
for more information
NOTE: XPRESSO-ULTRA LVPECL XOs are
designed to fit on Industry Standard, 6 pad layouts
Pin Connections
#1) E/D
#4) Output
#5) Output 2
#2) NC
#3) GND
#6) VDD
Drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Page 7 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-PC52 Series
Tape and Reel Dimensions
4.0mm
Ø1.5mm
7.5mm
5.5mm
16mm
12mm
2.15mm
8.0mm
2k Reel Dimensions
in mm
1k Reel Dimensions
in mm
2.0
2.0
Ø21.0
Ø13.0
120°
Ø21.0
Ø13.0
178.0
255.0
62.0
2.0
80.0
2.0
2.0
13.5
13.5
Labeling
(Reels and smaller packaging are labeled with the below)
852A-125-3
 Fox Part Number: 852A-125-3
 Quantity:
 Description:
 Date Code
2000 pieces
FXU-PC525R-125
1335
FXU-PC525R-125
1335
th
(YYWW 2013 35 wk)

LOT #
24435
If traceability should become necessary
An additional identification code is contained internally if tracking should ever be necessary
Page 8 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-PC52 Series
Traceability – LOT Number & Serial Identification
LOT Number
The LOT Number has direct ties to the customer purchase order. The LOT Number is marked on the
“Reel” label, and also stored internally on non-volatile memory inside the XPRESSO-ULTRA part.
XPRESSO-ULTRA parts that are shipped Tape and Reel, are also placed in an Electro Static Discharge
(ESD) bag and will have the LOT Number labeled on the exterior of the ESD bag.
It is recommended that the XPRESSO-ULTRA parts remain in this ESD bag during storage for protection and
identification.
If the parts become separated from the label showing the LOT Number, it can be retrieved from inside one
of the parts, and the information that can be obtained is listed below:





Customer Purchase Order Number
Internal Fox Sales Order Number
Dates that the XPRESSO-ULTRA part was shipped from the factory
The assigned customer part number
The specification that the part was designed for
Serial Identification
The Serial ID is the individualized information about the configuration of that particular XPRESSO-ULTRA
part. The Serial ID is unique for each and every XPRESSO-ULTRA part, and can be read by special Fox
equipment.
With the Serial ID, the below information can be obtained about that individual, XPRESSO-ULTRA part:







Equipment that the XPRESSO-ULTRA part was configured on
Raw material used to configure the XPRESSO-ULTRA part
Traceability of the raw material back to the foundries manufacturing lot
Date and Time that the part was configured
Any optimized electrical parameters based on customer specifications
Electrical testing of the actual completed part
Human resource that was monitoring the configuration of the part
Fox has equipment placed at key Fox locations World Wide to read the Lot Identification and Serial
Number of any XPRESSO-ULTRA part produced and can then obtain the information from above within 24
hours
Page 9 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-PC52 Series
Mechanical Testing
Parameter
Test Method
MIL-STD-202 Method 213
Condition C
Mechanical Shock
MIL-STD-202 Method 204
5g's for 20 minutes
12 cycles of each 3 orientations: X, Y, Z
Mechanical Vibration
Under Power @ 125°C for 1000 Hours
High Temperature Operating Life (HTOL)
Hermetic Seal
He pressure: 4 ±1 kgf / cm2 2 Hour soak
Page 10 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-PC52 Series
XpressO-ULTRA Home
XpressO-ULTRA XOs
XpressO Brochure
Patent Numbers:
US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290;
Foreign Patents: R.S.A. 98/0866, R.O.C. 120851; Singapore 67081, 67082; EP 0958652
China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179
US and Foreign Patents Pending
XpressO® Fox Electronics
Contact Information
(USA)-Worldwide Headquarters
Tel: 888-GET-2-FOX
Outside US: +1.239.693.0099,
Fax:+1.239.693.1554
Email: www.foxonline.com/email.htm
Fox EMEA
Tel: +44.1283.568153
Email: www.foxonline.com/email.htm
Fox Japan
Tel:+81.3.3374.2079,
Fax: +81.3.3377.5221
Email: www.foxonline.com/email.htm
Fox Singapore
Tel:+886-2-22073427,
Email: www.foxonline.com/email.htm
The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no
responsibility is assumed by Fox Electronics for inaccuracies.
Page 11 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
Similar pages