TI1 LMS1585AIS-1.5/NOPB Lms1585a 5a/lms1587 5a and 3a low dropout fast response regulator Datasheet

LMS1585A , LMS1587
www.ti.com
SNVS061G – MONTH 2003 – REVISED JULY 2013
LMS1585A 5A/LMS1587 5A and 3A Low Dropout Fast Response Regulators
Check for Samples: LMS1585A , LMS1587
FEATURES
DESCRIPTION
• Fast Transient Response
• Available in Adjustable, 1.5V, and 3.3V
versions
• Current Limiting and Thermal Protection
• Commercial Temp. Tange: 0°C to 125°C
• Industrial Temp. Range: −40°C to 125°C
• Line Regulation 0.005% (typical)
• Load Regulation 0.05% (typical)
• Direct Replacement for LT® 1585A/87
The LMS1585A and LMS1587 are low dropout
positive regulators with output load current of 5A and
3A respectively. Their low dropout voltage (1.2V) and
fast transient response make them an excellent
solution for low voltage microprocessor applications.
1
234
APPLICATIONS
•
•
•
•
Pentium® processor supplies
PowerPC® supplies
Other microprocessor supplies
Low voltage logic supplies
The LMS1585A/87 are available in adjustable
versions, which can set the output voltage with only
two external resistors. In addition, they are also
available in 1.5V and 3.3V fixed voltage versions (1).
The LMS1585A/87 circuits include a zener trimmed
bandgap reference, current limiting and thermal
shutdown. The LMS1585A/87 series are available in
KTT (TO-263) and NDE (TO-220) packages.
(1)
Consult factory for other fixed voltage options.
Typical Application
VIN •4.75V
3.3V
3A, 5A
LMS1585A/87-3.3
+
+
C1
10 µF
C2*
10 µF
* Required for Stability
VOUT
INPUT
OUTPUT
ADJ/GND
Figure 1. NDE (TO-220)
(Top View)
INPUT
Tab is
VOUT
OUTPUT
ADJ/GND
Figure 2. KTT (TO-263)
(Top View)
1
2
3
4
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPC is a registered trademark of IBM.
Pentium is a registered trademark of Intel Corporation.
LT is a registered trademark of Linear Technology.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2013, Texas Instruments Incorporated
LMS1585A , LMS1587
SNVS061G – MONTH 2003 – REVISED JULY 2013
www.ti.com
VIN
Thermal
Limit
VOUT
Substrate
GND (Fixed Output)
tADJ. (Adjustable Output)ttt
Table 1. LMS1585A/LMS1587 Device Options
Part Number
Output Voltage
LMS1585AIS-1.5
1.5V
LMS1585AIS-3.3
3.3V
LMS1585ACS-ADJ
Adjustable
LMS1585ACS-1.5
1.5V
LMS1585ACS-3.3
3.3V
LMS1585ACT-1.5
1.5V
LMS1585ACT-3.3
3.3V
LMS1587IS-ADJ
Adjustable
LMS1587IS-1.5
1.5V
LMS1587IS-3.3
3.3V
LMS1587CS-ADJ
Adjustable
LMS1587CS-3.3
3.3V
LMS1587CS-1.5
1.5V
LMS1587IT-1.5
1.5V
LMS1587CT-ADJ
Adjustable
LMS1587CT-3.3
3.3V
Operating
Temperature
Package Drawing
Package Type
Output Current
-40°C to 125°C
KTT
TO-263
5A
NDE
TO-220
5A
KTT
TO-263
0°C to 125°C
–40°C to 125°C
0°C to 125°C
3A
–40°C to 125C
0°C to 125°C
NDE
TO-220
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
2
Submit Documentation Feedback
Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LMS1585A LMS1587
LMS1585A , LMS1587
www.ti.com
SNVS061G – MONTH 2003 – REVISED JULY 2013
ABSOLUTE MAXIMUM RATINGS (1) (2)
Maximum Input to Output Voltage (VIN to GND)
Power Dissipation
13V
(3)
Internally Limited
Junction Temperature (TJ) (3)
150˚C
Storage Temperature Range
-65˚C to 150˚C
Lead Temperature
260˚C, 10 sec
ESD Tolerance (4)
(1)
(2)
(3)
(4)
2000V
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
The maximum power dissipation is a function of TJ(max) , θJA, and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJ(max)–T A)/θJA. All numbers apply for packages soldered directly into a PC board.
For testing purposes, ESD was applied using human body model, 1.5 kΩ in series with 100 pF.
Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LMS1585A LMS1587
Submit Documentation Feedback
3
LMS1585A , LMS1587
SNVS061G – MONTH 2003 – REVISED JULY 2013
www.ti.com
ELECTRICAL CHARACTERISTICS
Typicals and limits appearing in normal type apply for TJ = 25˚C. Limits appearing in Boldface type apply over the entire
junction temperature range for operation, 0˚C to 125˚C for commercial grade and −40˚C to 125˚C for industrial grade.
Symbol
VREF
Reference Voltage
VOUT
Output Voltage
∆VOUT
Line Regulation
VIN−VOUT
4
(3)
Load Regulation (3)
∆VOUT
(1)
(2)
(3)
Parameter
Dropout Voltage
Min (1)
Typ (2)
Max (1)
Units
LMS1585A-ADJ
VIN−VOUT = 3V, IOUT = 10mA
10mA ≤ IOUT ≤ 5A, 1.5V ≤ VIN− VOUT ≤ 5.75V
1.238
1.225
1.250
1.250
1.262
1.275
V
V
LMS1587-ADJ
10mA ≤ IOUT ≤ 3A, 1.5V ≤ VIN−VOUT ≤ 5.75V
1.225
1.250
1.275
V
LMS1585A-1.5
IOUT = 0mA, VIN = 5V
0 ≤ IOUT ≤ 5A, 3V ≤ VIN ≤ 7V
1.485
1.470
1.500
1.515
1.530
V
V
LMS1585A-3.3
I OUT = 0mA, V IN = 5V
0 ≤ I OUT ≤ 5A, 4.75V ≤ V IN ≤ 7V
3.267
3.235
3.300
3.300
3.333
3.365
V
V
LMS1587-1.5
V IN = 5V, I OUT = 0mA, TJ = 25˚C
0≤ I OUT ≤ 3A, 3V ≤ VIN ≤ 7V
1.485
1.470
1.500
1.500
1.515
1.530
V
V
LMS1587-3.3
0 ≤ I OUT ≤ 3A, 4.75V ≤ VIN ≤ 7V
3.235
3.300
3.365
V
LMS1585A/87-ADJ
IOUT = 10mA, 2.75V ≤ V IN ≤ 7V
0.005
0.2
%
LMS1585A/87-3.3
I OUT = 0mA, 4.75V ≤ VIN ≤ 7V
0.005
0.2
%
LMS1585A/87-1.5
I OUT = 0mA, 3V ≤ VIN ≤ 7V
Conditions
0.005
0.2
%
LMS1585A-ADJ
VIN−VOUT = 3V, 10mA ≤ IOUT ≤ 5A
%
0.05
0.3
0.5
LMS1585A-1.5/LMS1585A-3.3
VIN = 5V, 0 ≤ IOUT ≤ 5A
0.05
0.05
0.3
0.5
%
LMS1587-ADJ
VIN−VOUT = 3V, 10mA ≤ IOUT ≤ 3A
0.05
0.05
0.3
0.5
%
LMS1587-1.5/LMS1587-3.3
VIN = 5V, 0 ≤ IOUT ≤ 3A
0.05
0.05
0.3
0.5
%
%
LMS1585A-ADJ/LMS1587-ADJ
∆VREF = 1%, IOUT = 3A
1.15
1.3
V
LMS1585A-3.3/LMS1587-3.3/
LMS1585A-1.5/LMS1587-1.5
∆VOUT = 1%, IOUT = 3A
1.15
1.3
V
LMS1585A-ADJ
∆VREF = 1%, IOUT = 5A
1.2
1.4
V
LMS1585A-1.5/LMS1585A-3.3
∆VOUT = 1%, IOUT = 5A
1.2
1.4
V
All limits are specified by testing or statistical analysis.
Typical Values represent the most likely parametric norm.
Load and line regulation are measured at constant junction temperature, and are ensured up to the maximum power dissipation of 30W.
Power dissipation is determined by the input/output differential and the output current. Ensured maximum power dissipation will not be
available over the full input/output range.
Submit Documentation Feedback
Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LMS1585A LMS1587
LMS1585A , LMS1587
www.ti.com
SNVS061G – MONTH 2003 – REVISED JULY 2013
ELECTRICAL CHARACTERISTICS (continued)
Typicals and limits appearing in normal type apply for TJ = 25˚C. Limits appearing in Boldface type apply over the entire
junction temperature range for operation, 0˚C to 125˚C for commercial grade and −40˚C to 125˚C for industrial grade.
ILIMIT
Current Limit
LMS1585A-ADJ/LMS1585A-3.3/LMS1585A-1.5
VIN−VOUT = 5.5V
5.0
6.6
A
LMS1587-ADJ/LMS1587-3.3/LMS1587-1.5
VIN−VOUT = 5.5V
3.1
4.3
A
Minimum Load
Current (4)
LMS1585A/87-ADJ
1.5V ≤ VIN−VOUT ≤ 5.75V
Quiescent Current
LMS1585A-3.3/LMS1587-3.3/
LMS1585A-1.5/LMS1587-1.5
VIN = 5V
Thermal Regulation
TA = 25˚C, 30ms Pulse
Ripple Rejection
LMS1585A-ADJ
fRIPPLE = 120Hz, VIN−VOUT = 3V,
IOUT = 5A, COUT = 25µF Tantalum
LMS1585A-1.5
fRIPPLE = 120Hz, COUT = 25µF
Tantalum, IOUT = 5A, VIN = 4.5V
7.0
13.0
mA
0.003
%/W
72
dB
dB
72
dB
LMS1587-ADJ
fRIPPLE = 120 Hz, VIN−VOUT = 3V, IOUT = 3A
COUT = 25 µF Tantalum
72
dB
72
dB
72
dB
Adjust Pin Current
60
55
10mA ≤ IOUT ≤ IFULLLOAD,
1.5V ≤ VIN−VOUT ≤ 5.75V (5)
Adjust Pin Current
mA
72
LMS1587-3.3
fRIPPLE = 120 Hz, COUT = 25µF Tantalum,
IOUT = 3A, VIN = 6.3V
Temperature Stability
(4)
(5)
10.0
LMS1585A-3.3
fRIPPLE = 120Hz, COUT = 25µF
Tantalum, IOUT = 5A, VIN = 6.3V
LMS1587-1.5
fRIPPLE = 120 Hz, COUT = 25µF Tantalum,
IOUT = 3A, VIN = 4.5V
60
2.0
120
µA
0.2
µA
0.5
%
Long Term Stability
TA = 125˚C, 1000Hrs
0.03
%
RMS Output Noise
(% of VOUT)
10Hz ≤ f ≤ 10kHz
0.003
%
Thermal Resistance
Junction-to-Case
3-Lead KTT (TO-263): Control/Output Section
3-Lead NDE (TO-220): Control/Output Section
0.65/2.7
0.65/2.7
*C/W
*C/W
The minimum output current required to maintain regulation.
IFULLLOAD is 5A for LMS1585A and 3A for LMS1587.
Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LMS1585A LMS1587
Submit Documentation Feedback
5
LMS1585A , LMS1587
SNVS061G – MONTH 2003 – REVISED JULY 2013
www.ti.com
APPLICATION NOTE
OUTPUT VOLTAGE
The adjustable version develops at 1.25V reference voltage, (VREF), between the output and the adjust terminal.
As shown in Figure 3, this voltage is applied across resistor R1 to generate a constant current I1. This constant
current then flows through R2. The resulting voltage drop across R2 adds to the reference voltage to sets the
desired output voltage.
The current IADJ from the adjustment terminal introduces an output error. But since it is small (120μA max), it
becomes negligible when R1 is in the 100Ω range.
For fixed voltage devices, R1 and R2 are integrated inside the devices.
VIN
VIN
VOUT
VOUT
ADJ
I1
VREF
R1
10 µF
10 µF
IADJ
R2
R2) + IADJR2
VOUT = VREF (1 + R2
R1
Figure 3. Basic Adjustable Regulator
6
Submit Documentation Feedback
Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LMS1585A LMS1587
PACKAGE OPTION ADDENDUM
www.ti.com
1-Nov-2015
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LMS1585ACS-1.5
NRND
DDPAK/
TO-263
KTT
3
45
TBD
Call TI
Call TI
0 to 125
LMS1585
ACS-1.5
LMS1585ACS-1.5/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
45
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
0 to 125
LMS1585
ACS-1.5
LMS1585ACS-3.3
NRND
DDPAK/
TO-263
KTT
3
45
TBD
Call TI
Call TI
0 to 125
LMS1585
ACS-3.3
LMS1585ACS-3.3/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
45
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
0 to 125
LMS1585
ACS-3.3
LMS1585ACSX-1.5/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
500
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
0 to 125
LMS1585
ACS-1.5
LMS1585ACSX-3.3
NRND
DDPAK/
TO-263
KTT
3
TBD
Call TI
Call TI
0 to 125
LMS1585
ACS-3.3
LMS1585ACSX-3.3/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
0 to 125
LMS1585
ACS-3.3
LMS1585ACSX-ADJ
NRND
DDPAK/
TO-263
KTT
3
TBD
Call TI
Call TI
0 to 125
LMS1585
ACS-ADJ
LMS1585ACSX-ADJ/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
500
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
0 to 125
LMS1585
ACS-ADJ
LMS1585ACT-1.5
NRND
TO-220
NDE
3
45
TBD
Call TI
Call TI
0 to 125
LMS1585ACT
1.5
LMS1585ACT-1.5/NOPB
ACTIVE
TO-220
NDE
3
45
Green (RoHS
& no Sb/Br)
CU SN
Level-1-NA-UNLIM
0 to 125
LMS1585ACT
1.5
LMS1585ACT-3.3/NOPB
ACTIVE
TO-220
NDE
3
45
Green (RoHS
& no Sb/Br)
CU SN
Level-1-NA-UNLIM
0 to 125
LMS1585
ACT-3.3
LMS1585AIS-1.5
NRND
DDPAK/
TO-263
KTT
3
45
TBD
Call TI
Call TI
-40 to 125
LMS1585
AIS-1.5
LMS1585AIS-1.5/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
45
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
-40 to 125
LMS1585
AIS-1.5
LMS1585AIS-3.3/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
45
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
-40 to 125
LMS1585
AIS-3.3
LMS1587CS-1.5
NRND
DDPAK/
TO-263
KTT
3
TBD
Call TI
Call TI
0 to 125
LMS1587
CS-1.5
LMS1587CS-1.5/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
0 to 125
LMS1587
CS-1.5
500
45
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
1-Nov-2015
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LMS1587CS-3.3
NRND
DDPAK/
TO-263
KTT
3
45
TBD
Call TI
Call TI
0 to 125
LMS1587
CS-3.3
LMS1587CS-3.3/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
45
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
0 to 125
LMS1587
CS-3.3
LMS1587CS-ADJ
NRND
DDPAK/
TO-263
KTT
3
45
TBD
Call TI
Call TI
0 to 125
LMS1587
CS-ADJ
LMS1587CS-ADJ/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
45
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
0 to 125
LMS1587
CS-ADJ
LMS1587CSX-1.5
NRND
DDPAK/
TO-263
KTT
3
TBD
Call TI
Call TI
0 to 125
LMS1587
CS-1.5
LMS1587CSX-1.5/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
500
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
0 to 125
LMS1587
CS-1.5
LMS1587CSX-3.3
NRND
DDPAK/
TO-263
KTT
3
500
TBD
Call TI
Call TI
0 to 125
LMS1587
CS-3.3
LMS1587CSX-3.3/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
500
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
0 to 125
LMS1587
CS-3.3
LMS1587CSX-ADJ
NRND
DDPAK/
TO-263
KTT
3
TBD
Call TI
Call TI
0 to 125
LMS1587
CS-ADJ
LMS1587CSX-ADJ/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
500
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
0 to 125
LMS1587
CS-ADJ
LMS1587CT-3.3
NRND
TO-220
NDE
3
45
TBD
Call TI
Call TI
0 to 125
LMS1587
CT-3.3
LMS1587CT-3.3/NOPB
ACTIVE
TO-220
NDE
3
45
Green (RoHS
& no Sb/Br)
CU SN
Level-1-NA-UNLIM
0 to 125
LMS1587
CT-3.3
LMS1587CT-ADJ
NRND
TO-220
NDE
3
45
TBD
Call TI
Call TI
0 to 125
LMS1587
CT-ADJ
LMS1587CT-ADJ/NOPB
ACTIVE
TO-220
NDE
3
45
Green (RoHS
& no Sb/Br)
CU SN
Level-1-NA-UNLIM
0 to 125
LMS1587
CT-ADJ
LMS1587IS-1.5
NRND
DDPAK/
TO-263
KTT
3
45
TBD
Call TI
Call TI
-40 to 125
LMS1587
IS-1.5
LMS1587IS-1.5/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
45
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
-40 to 125
LMS1587
IS-1.5
LMS1587IS-3.3
NRND
DDPAK/
TO-263
KTT
3
45
TBD
Call TI
Call TI
-40 to 125
LMS1587
IS-3.3
LMS1587IS-3.3/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
45
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
-40 to 125
LMS1587
IS-3.3
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
1-Nov-2015
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LMS1587IS-ADJ
NRND
DDPAK/
TO-263
KTT
3
45
TBD
Call TI
Call TI
-40 to 125
LMS1587
IS-ADJ
LMS1587IS-ADJ/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
45
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
-40 to 125
LMS1587
IS-ADJ
LMS1587ISX-3.3/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
500
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
-40 to 125
LMS1587
IS-3.3
LMS1587ISX-ADJ
NRND
DDPAK/
TO-263
KTT
3
500
TBD
Call TI
Call TI
-40 to 125
LMS1587
IS-ADJ
LMS1587ISX-ADJ/NOPB
ACTIVE
DDPAK/
TO-263
KTT
3
500
Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR
-40 to 125
LMS1587
IS-ADJ
LMS1587IT-1.5/NOPB
ACTIVE
TO-220
NDE
3
45
Green (RoHS
& no Sb/Br)
CU SN
Level-1-NA-UNLIM
-40 to 125
LMS1587
IT-1.5
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Addendum-Page 3
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
1-Nov-2015
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Sep-2015
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
LMS1585ACSX-1.5/NOPB DDPAK/
TO-263
KTT
3
500
330.0
24.4
10.75
14.85
5.0
16.0
24.0
Q2
LMS1585ACSX-3.3/NOPB DDPAK/
TO-263
KTT
3
500
330.0
24.4
10.75
14.85
5.0
16.0
24.0
Q2
LMS1585ACSX-ADJ/NOP DDPAK/
B
TO-263
KTT
3
500
330.0
24.4
10.75
14.85
5.0
16.0
24.0
Q2
LMS1587CSX-1.5/NOPB DDPAK/
TO-263
KTT
3
500
330.0
24.4
10.75
14.85
5.0
16.0
24.0
Q2
DDPAK/
TO-263
KTT
3
500
330.0
24.4
10.75
14.85
5.0
16.0
24.0
Q2
LMS1587CSX-3.3/NOPB DDPAK/
TO-263
KTT
3
500
330.0
24.4
10.75
14.85
5.0
16.0
24.0
Q2
LMS1587CSX-ADJ/NOPB DDPAK/
TO-263
KTT
3
500
330.0
24.4
10.75
14.85
5.0
16.0
24.0
Q2
LMS1587CSX-3.3
LMS1587ISX-3.3/NOPB
DDPAK/
TO-263
KTT
3
500
330.0
24.4
10.75
14.85
5.0
16.0
24.0
Q2
LMS1587ISX-ADJ
DDPAK/
TO-263
KTT
3
500
330.0
24.4
10.75
14.85
5.0
16.0
24.0
Q2
LMS1587ISX-ADJ/NOPB DDPAK/
TO-263
KTT
3
500
330.0
24.4
10.75
14.85
5.0
16.0
24.0
Q2
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
2-Sep-2015
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LMS1585ACSX-1.5/NOPB
DDPAK/TO-263
KTT
3
500
367.0
367.0
45.0
LMS1585ACSX-3.3/NOPB
DDPAK/TO-263
KTT
3
500
367.0
367.0
45.0
LMS1585ACSX-ADJ/NOP
B
DDPAK/TO-263
KTT
3
500
367.0
367.0
45.0
LMS1587CSX-1.5/NOPB
DDPAK/TO-263
KTT
3
500
367.0
367.0
45.0
LMS1587CSX-3.3
DDPAK/TO-263
KTT
3
500
367.0
367.0
45.0
LMS1587CSX-3.3/NOPB
DDPAK/TO-263
KTT
3
500
367.0
367.0
45.0
LMS1587CSX-ADJ/NOPB
DDPAK/TO-263
KTT
3
500
367.0
367.0
45.0
LMS1587ISX-3.3/NOPB
DDPAK/TO-263
KTT
3
500
367.0
367.0
45.0
LMS1587ISX-ADJ
DDPAK/TO-263
KTT
3
500
367.0
367.0
45.0
LMS1587ISX-ADJ/NOPB
DDPAK/TO-263
KTT
3
500
367.0
367.0
45.0
Pack Materials-Page 2
MECHANICAL DATA
NDE0003B
www.ti.com
MECHANICAL DATA
KTT0003B
TS3B (Rev F)
BOTTOM SIDE OF PACKAGE
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
Similar pages