Kemet C052H272G1G5GA7303 Radial through-hole multilayer ceramic capacitor Datasheet

Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric,
50 – 200 VDC (Industrial Grade)
Overview
KEMET’s High Temperature 200ºC epoxy molded radial
through-hole ceramic capacitors in C0G dielectric features a
robust and proprietary base metal dielectric system that offers
industry-leading performance in extreme high pressure and
high temperature environments up to 200°C. These capacitors
are designed specifically to withstand the severe shock and
vibration conditions associated with deep-well and horizontal
drilling activities and are well suited for use in aerospace
engine compartments, geophysical probes, hybrid and electric
automotive motor drives and defense applications.
As high temperature electronic module complexity increases,
the size reduction of components becomes more and more
critical. These devices are significantly smaller by volume
than most competitor radial molded capacitors, allowing for
downsizing and replacement opportunities of larger high
temperature precious metal electrode (PME) and base metal
electrode (BME) dielectric system devices. They feature goldplated lead wires for temperature resistance and an epoxy molded
case for environmental protection and mechanical durability.
With virtually no capacitance change at 200°C and rated voltage
applied, these radial molded capacitors in C0G dielectric are
temperature compensating and are suited for resonant circuit
applications or those where Q and stability of capacitance
characteristics are required. They exhibit no change in capacitance
with respect to time and voltage and boast a negligible change in
capacitance with reference to ambient temperature. Capacitance
change is limited to ±30ppm/ºC from -55°C to +200°C. In addition,
these capacitors exhibit high insulation resistance with low
dissipation factor at elevated temperatures up to 200°C, as well as
low ESR at high frequencies.
Click image above for interactive 3D content
Ordering Information
C
052
Ceramic Style/Size
052
062
Open PDF in Adobe Reader for full functionality
H
272
Specification/
Series
Capacitance
Code (pF)
H = High Temp 2 significant digits +
200ºC
number of zeros
Use 9 for 1.0 – 9.9 pF
ex. 2.2 pF = 229
F
2
G
Capacitance Rated Voltage
Dielectric
Tolerance1
(VDC)
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
5 = 50
1 = 100
2 = 200
5
G
A
7301
Design
Lead Finish2
Failure
Rate
Packaging
C-Spec3
G = C0G 5 = Multilayer G = Gold (Au) A = N/A Blank = Bulk Bag
T250 = 250 pcs /
12" Reel
T500 = 500 pcs /
12" Reel
T1K0 = 1,000 pcs
/ 12" Reel
7301 = Full Reel
Qty / 12" Reel
7303 = Full Reel
Qty / 12" Reel
7061 = Bulk Tray
Additional capacitance tolerance offerings may be available. Contact KEMET for details.
Wire lead materials and finishes: Alternative lead materials and finishes may be available. Contact KEMET for details.
3
Default packaging for this product series is "Bulk Bag". KEMET will assume "Bulk Bag" packaging is required when the 15th thru 18th character positions are left blank.
3
C-Spec 7301 can only be used when ordering 052 style/size.
3
C-Spec 7303 can only be used when ordering 062 style/size.
1
2
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
1
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Dimensions – Inches (Millimeters)
C052H
C062H
L
0.045
(1.143)
Maximum
T
L
H
H
LL
LD
LL
LD
S
Series
T
S
S
Lead Spacing
L
Length
H
Height
T
Thickness
LD
Lead Diameter
LL
Lead Length
Minimum
0.20 ±0.015
(5.08 ±0.38)
0.19 ±0.01
(4.83 ±0.25)
0.29 ±0.01
(7.37 ±0.25)
0.19 ±0.01
(4.83 ±0.25)
0.29 ±0.01
(7.37 ±0.25)
0.09 ±0.01
(2.29 ±0.25)
0.09 ±0.01
(2.29 ±0.25)
0.025 +0.004/ -0.002
(0.635 +0.102/ -0.051)
1.25 (31.75)
C052H
C062H
Benefits
• Operating temperature range of -55°C to +200°C
• High shock and vibration capability
• Base Metal Electrode (BME) dielectric system
• RoHS and REACH compliant
• Radial through-hole form factor
• Gold (Au) plated wire lead finish
• Military designation styles CK/CKR05 and CK/CKR06
• Molded case
• High breakdown voltage strength
• DC voltage ratings of 50 V, 100 V & 200 V
• Capacitance offerings ranging from 1.0 pF up to 0.22 μF
• Available capacitance tolerances of ±0.1 pF, ±0.25 pF, ±0.5 pF,
±1%, ±2%, ±5%, & ±10%
• Extremely low ESR & ESL
• High thermal stability
• High ripple current capability
• No capacitance change with respect to applied rated DC voltage
• Negligible capacitance change with respect to temperature from
-55°C to +200°C
• No capacitance decay with time
• Non-polar device, minimizing installation concerns
• Encapsulation meets flammability standard UL 94V-0
• Halogen-free
Applications
Typical applications include critical timing, tuning, circuits requiring low loss, circuits with pulse, high current, decoupling, bypass,
filtering, transient voltage suppression, blocking and energy storage, circuits with a direct battery or power source connection, critical
and safety relevant circuits without (integrated) current limitation and any application that is subject to extreme environments such
as high shock and vibration, high temperature, high levels of board flexure and/or temperature cycling. Programs supported include
down-hole exploration, aerospace engine compartments, geophysical probes, hybrid and electric automotive motor drives and defense.
Markets include military, industrial, aerospace, and automotive.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
2
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Qualification
These devices are subject to internal qualification. Details regarding test methods and conditions are referenced in
Table 2, Performance & Reliability.
Environmental Compliance
RoHS compliant and halogen-free. These devices utilize exemption 7(a) of the RoHS directive.
1
Series
RoHS
Compliant
RoHS Exemption
Code1
Halogen Free
C052H
Yes
7(a)
Yes
C062H
Yes
7(a)
Yes
7(a): Lead in high melting temperature type solders
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range
Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC)
Aging Rate (Maximum % Cap Loss/Decade Hour)
Dielectric Withstanding Voltage
Dissipation Factor (DF) Maximum Limit at 25ºC
Insulation Resistance (IR) Limit at 25°C
-55°C to +200°C
±30 ppm/ºC
0%
250% of rated voltage
(5 ±1 seconds and charge/discharge not exceeding 50 mA at 25°C)
0.1%
1,000 MΩ microfarads or 100 GΩ
(Rated voltage applied for 120 ±5 seconds)
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and dissipation factor (DF) measured under the following conditions:
1 MHz ±100 kHz and 1.0 Vrms ±0.2 V if capacitance ≤ 1,000 pF
1 kHz ±50Hz and 1.0 Vrms ±0.2 V if capacitance > 1,000 pF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Dielectric
Rated DC Voltage
Capacitance Value
DF (%)
Capacitance Shift
IR
C0G
All
All
0.5
0.3% or ±0.25 pF
10% of Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
3
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 1A – C052 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall
C052 Style/Size (0.20" Lead Spacing)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
Capacitance
Tolerance
Capacitance
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1,000 pF
1,200 pF
1,500 pF
1,800 pF
2,200 pF
Capacitance Code (Available Capacitance)
C052H109(1)5G5GA(3)
C052H129(1)5G5GA(3)
C052H159(1)5G5GA(3)
C052H189(1)5G5GA(3)
C052H229(1)5G5GA(3)
C052H279(1)5G5GA(3)
C052H339(1)5G5GA(3)
C052H399(1)5G5GA(3)
C052H479(1)5G5GA(3)
C052H569(1)5G5GA(3)
C052H689(1)5G5GA(3)
C052H829(1)5G5GA(3)
C052H100(2)5G5GA(3)
C052H120(2)5G5GA(3)
C052H150(2)5G5GA(3)
C052H180(2)5G5GA(3)
C052H220(2)5G5GA(3)
C052H270(2)5G5GA(3)
C052H330(2)5G5GA(3)
C052H390(2)5G5GA(3)
C052H470(2)5G5GA(3)
C052H560(2)5G5GA(3)
C052H680(2)5G5GA(3)
C052H820(2)5G5GA(3)
C052H101(2)5G5GA(3)
C052H121(2)5G5GA(3)
C052H151(2)5G5GA(3)
C052H181(2)5G5GA(3)
C052H221(2)5G5GA(3)
C052H271(2)5G5GA(3)
C052H331(2)5G5GA(3)
C052H391(2)5G5GA(3)
C052H471(2)5G5GA(3)
C052H561(2)5G5GA(3)
C052H681(2)5G5GA(3)
C052H821(2)5G5GA(3)
C052H102(2)5G5GA(3)
C052H122(2)5G5GA(3)
C052H152(2)5G5GA(3)
C052H182(2)5G5GA(3)
C052H222(2)5G5GA(3)
C052H109(1)1G5GA(3)
C052H129(1)1G5GA(3)
C052H159(1)1G5GA(3)
C052H189(1)1G5GA(3)
C052H229(1)1G5GA(3)
C052H279(1)1G5GA(3)
C052H339(1)1G5GA(3)
C052H399(1)1G5GA(3)
C052H479(1)1G5GA(3)
C052H569(1)1G5GA(3)
C052H689(1)1G5GA(3)
C052H829(1)1G5GA(3)
C052H100(2)1G5GA(3)
C052H120(2)1G5GA(3)
C052H150(2)1G5GA(3)
C052H180(2)1G5GA(3)
C052H220(2)1G5GA(3)
C052H270(2)1G5GA(3)
C052H330(2)1G5GA(3)
C052H390(2)1G5GA(3)
C052H470(2)1G5GA(3)
C052H560(2)1G5GA(3)
C052H680(2)1G5GA(3)
C052H820(2)1G5GA(3)
C052H101(2)1G5GA(3)
C052H121(2)1G5GA(3)
C052H151(2)1G5GA(3)
C052H181(2)1G5GA(3)
C052H221(2)1G5GA(3)
C052H271(2)1G5GA(3)
C052H331(2)1G5GA(3)
C052H391(2)1G5GA(3)
C052H471(2)1G5GA(3)
C052H561(2)1G5GA(3)
C052H681(2)1G5GA(3)
C052H821(2)1G5GA(3)
C052H102(2)1G5GA(3)
C052H122(2)1G5GA(3)
C052H152(2)1G5GA(3)
C052H182(2)1G5GA(3)
C052H222(2)1G5GA(3)
C052H109(1)2G5GA(3)
C052H129(1)2G5GA(3)
C052H159(1)2G5GA(3)
C052H189(1)2G5GA(3)
C052H229(1)2G5GA(3)
C052H279(1)2G5GA(3)
C052H339(1)2G5GA(3)
C052H399(1)2G5GA(3)
C052H479(1)2G5GA(3)
C052H569(1)2G5GA(3)
C052H689(1)2G5GA(3)
C052H829(1)2G5GA(3)
C052H100(2)2G5GA(3)
C052H120(2)2G5GA(3)
C052H150(2)2G5GA(3)
C052H180(2)2G5GA(3)
C052H220(2)2G5GA(3)
C052H270(2)2G5GA(3)
C052H330(2)2G5GA(3)
C052H390(2)2G5GA(3)
C052H470(2)2G5GA(3)
C052H560(2)2G5GA(3)
C052H680(2)2G5GA(3)
C052H820(2)2G5GA(3)
C052H101(2)2G5GA(3)
C052H121(2)2G5GA(3)
C052H151(2)2G5GA(3)
C052H181(2)2G5GA(3)
C052H221(2)2G5GA(3)
C052H271(2)2G5GA(3)
C052H331(2)2G5GA(3)
C052H391(2)2G5GA(3)
C052H471(2)2G5GA(3)
C052H561(2)2G5GA(3)
C052H681(2)2G5GA(3)
C052H821(2)2G5GA(3)
C052H102(2)2G5GA(3)
C052H122(2)2G5GA(3)
C052H152(2)2G5GA(3)
C052H182(2)2G5GA(3)
C052H222(2)2G5GA(3)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
(1) (2) To complete ordering code, insert the proper character for capacitance tolerance: (See table above for character definitions)
(1) Available capacitance tolerances: B, C, D
(2) Available capacitance tolerances: F, G, J, K
(3) To complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See details below:
Blank = Bulk Bag
T250 = 250 pcs / 12" Reel
T500 = 500pcs / 12" Reel
T1K0 = 1,000 pcs / 12" reel
7301 = Full Reel Qty / 12" reel
7303 = Full Reel Qty / 12" reel
7061 = Bulk Tray
These products are protected under U.S. Patents 7172985 & 7670981, other patents pending, and any foreign counterparts.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
4
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 1A – C052 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall cont'd
C052 Style/Size (0.20" Lead Spacing)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
Capacitance
Tolerance
Capacitance
2,700 pF
3,300 pF
3,900 pF
4,700 pF
5,600 pF
6,800 pF
8,200 pF
0.01 µF
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
0.033 µF
0.039 µF
0.047 µF
0.056 µF
0.068 µF
0.082 µF
0.1 µF
Capacitance Code (Available Capacitance)
C052H272(2)5G5GA(3)
C052H332(2)5G5GA(3)
C052H392(2)5G5GA(3)
C052H472(2)5G5GA(3)
C052H562(2)5G5GA(3)
C052H682(2)5G5GA(3)
C052H822(2)5G5GA(3)
C052H103(2)5G5GA(3)
C052H123(2)5G5GA(3)
C052H153(2)5G5GA(3)
C052H183(2)5G5GA(3)
C052H223(2)5G5GA(3)
C052H273(2)5G5GA(3)
C052H333(2)5G5GA(3)
C052H393(2)5G5GA(3)
C052H473(2)5G5GA(3)
C052H563(2)5G5GA(3)
C052H683(2)5G5GA(3)
C052H823(2)5G5GA(3)
C052H104(2)5G5GA(3)
C052H272(2)1G5GA(3)
C052H332(2)1G5GA(3)
C052H392(2)1G5GA(3)
C052H472(2)1G5GA(3)
C052H562(2)1G5GA(3)
C052H682(2)1G5GA(3)
C052H822(2)1G5GA(3)
C052H103(2)1G5GA(3)
C052H123(2)1G5GA(3)
C052H153(2)1G5GA(3)
C052H183(2)1G5GA(3)
C052H223(2)1G5GA(3)
C052H273(2)1G5GA(3)
C052H333(2)1G5GA(3)
C052H393(2)1G5GA(3)
C052H473(2)1G5GA(3)
C052H272(2)2G5GA(3)
C052H332(2)2G5GA(3)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
F = ±1%
G = ±2%
J = ±5%
K = ±10%
(1) (2) To complete ordering code, insert the proper character for capacitance tolerance: (See table above for character definitions)
(1) Available capacitance tolerances: B, C, D
(2) Available capacitance tolerances: F, G, J, K
(3) To complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See details below:
Blank = Bulk Bag
T250 = 250 pcs / 12" Reel
T500 = 500pcs / 12" Reel
T1K0 = 1,000 pcs / 12" reel
7301 = Full Reel Qty / 12" reel
7303 = Full Reel Qty / 12" reel
7061 = Bulk Tray
These products are protected under U.S. Patents 7172985 & 7670981, other patents pending, and any foreign counterparts.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
5
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 1B – C062 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall
C062 Style/Size (0.20" Lead Spacing)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
Capacitance
4,700 pF
5,600 pF
6,800 pF
0.056 µF
0.068 µF
0.082 µF
0.1 µF
0.12 µF
0.15 µF
0.18 µF
0.22 µF
Capacitance
Tolerance
Capacitance Code (Available Capacitance)
F = ±1%
G = ±2%
J = ±5%
K = ±10%
C062H563(1)1G5GA(2)
C062H683(1)1G5GA(2)
C062H823(1)1G5GA(2)
C062H104(1)1G5GA(2)
C062H124(1)1G5GA(2)
C062H124(1)5G5GA(2)
C062H154(1)5G5GA(2)
C062H184(1)5G5GA(2)
C062H224(1)5G5GA(2)
C062H472(1)2G5GA(2)
C062H562(1)2G5GA(2)
C062H682(1)2G5GA(2)
Rated Voltage (VDC)
50
100
200
Voltage Code
5
1
2
(1) To complete ordering code, insert the proper character for capacitance tolerance: (See table above for character definitions)
(1) Available capacitance tolerances: F, G, J, K
(2) To complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See details below:
Blank = Bulk Bag
T250 = 250 pcs / 12" Reel
T500 = 500pcs / 12" Reel
T1K0 = 1,000 pcs / 12" reel
7301 = Full Reel Qty / 12" reel
7303 = Full Reel Qty / 12" reel
7061 = Bulk Tray
These products are protected under U.S. Patents 7172985 & 7670981, other patents pending, and any foreign counterparts.
Packaging Quantities
Packaging Options
Bulk Bag
(default) 1
Bulk Tray
Tape and Reel
Packaging Quantities 3
Ordering Code
C-Spec 2
Style/
Series
n/a
7061
T250
T500
T1K0
7301
7303
C052H
100 pcs / bag
50 pcs / tray
250
500
1,000
2,000
n/a
C062H
100 pcs / bag
40 pcs / tray
250
500
1,000
n/a
1,500
Default packaging for this product series is "Bulk Bag". KEMET will assume " Bulk Bag" packaging is required unless a valid C-spec is included in the 15th thru
18th character positions of the ordering code. For more information see "Ordering Information" section of this document.
1, 2
The " Ordering Code C-Spec" is a four-digit code that follows the KEMET part number and identifies any special packaging or processing requirements. Failure
to include a C-Spec when ordering will result in the default packaging option. Default packaging for this product series is "Bulk Bag".
3
Packaging quantities reported above are considered "minimum order quantities" and are mandatory.
1
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
6
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Soldering Process
Recommended Soldering Technique:
• Solder Wave
• Hand Soldering (Manual)
Recommended Soldering Profile:
• Optimum Wave Solder Profile
• Hand Soldering (Manual)
Manual Solder Profile with Pre -heating
Soldering
Gradual Cooling
Max 3 seconds
Delta T <= 120 °C
Gradual Preheat
60-120 Seconds
Recommend 2.5 °C/sec
KEMET recommends following the guidelines and techniques outlined in technical bulletins F2103 and F9207.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
7
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 2 – Performance & Reliability: Test Methods and Conditions
Stress
Reference
Test or Inspection Method
Solderability
J–STD–002
Temperature Cycling
JESD22 Method JA–104
Biased Humidity
MIL–STD–202 Method 103
Immersion
MIL–STD–202 Method 104
Test condition B
Storage Life
MIL–STD–202 Method 108
Unpowered 1,000 hours at 200°C. Measurement at 24 hours ±4 hours after test conclusion.
IR Measurement at 150°C
High Temperature Life
MIL–STD–202 Method 108
1,000 hours at 200°C with rated voltage applied.
High Temperature
Lead Pull
KEMET Defined Test
Vibration
MIL–STD–202 Method 204
Resistance to Soldering
Heat
5g for 20 minutes, 12 cycles each of 3 orientations. Note: Use 8" X 5" PCB. 031" thick 7 secure
points on one long side and 2 secure points at corners of opposite sides. Parts mounted within 2"
from any secure point. Test from 10 – 2000 Hz.
MIL–STD–202 Method 210
Test Condition B, Solder dip. Note: no preheat of samples.
Terminal Strength
MIL–STD–202 Method 211
Test Condition A. 454g 5 – 10 s; Bend test © 227g, 3 bends
Mechanical Shock
MIL–STD–202 Method 213
Test Condition D. Figure 1 of Method 213.
Resistance to Solvents
MIL–STD–202 Method 215
Add aqueous wash chemical – OKEM Clean or equivalent.
Method A at 235°C, category 3
50 cycles (-55°C to 220°C), measurement at 24 ±4 hours after test conclusion. 30 minutes
maximum dwell time at each temperature extreme. 8 minutes maximum transition time.
Load humidity: 1,000 hours 85°C/85% RH and rated voltage. Add 100 K ohm resistor. Measurement
at 24 hours ±4 hours after test conclusion.
Low volt humidity: 1,000 hours 85°C/85% RH and 1.5 V. Add 100 K ohm resistor.
Measurement at 24 hours ±4 hours after test conclusion.
Peel to Failure (25ºC and 200ºC): 4 lbs (1.84 kg) minimum
Storage & Handling
The un-mounted storage life of a through-hole (leaded) ceramic capacitor is dependent upon storage and atmospheric conditions
as well as packaging materials. While the ceramic chips enveloped under the epoxy coating themselves are quite robust in most
environments, solderability of the wire lead on the final epoxy-coated product will be degraded by exposure to high temperatures, high
humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature and
exposure to direct sunlight – reels may soften or warp, and tape peel force may increase. KEMET recommends storing the un-mounted
capacitors in their original packaging, in a location away from direct sunlight, and where the temperature and relative humidity do not
exceed 40 degrees centigrade and 70% respectively. For optimum solderability, capacitor stock should be used promptly, preferably
within 18 months of receipt. For applications requiring pre-tinning of components, storage life may be extended if solderability is
verified. Before cleaning, bonding or molding these devices, it is important to verify that your process does not affect product quality
and performance. KEMET recommends testing and evaluating the performance of a cleaned, bonded or molded product prior to
implementing and/or qualifying any of these processes.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
8
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Application Notes
Working Voltage:
Application voltage (Vp-p or Vo-p) must not exceed the voltage rating of the capacitor. Irregular voltages can be generated for a
transient period of time when voltage is initially applied and/or removed from a circuit. It is important to choose a capacitor with a
voltage rating greater than or equal to these irregular voltages.
Operating Temperature and Self-Generating Heat:
The surface temperature of a capacitor should be kept below the upper limit of its rated operating temperature range. Be sure to take
into account the heat generated by the capacitor itself. When the capacitor is used in a high-frequency current, pulse current or similar
current, it may self-generate heat due to dielectric loss. Temperature rise due to self-generated heating should not exceed 20°C (while
operated at an atmosphere temperature of 25°C).
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR
PARTIAL DISPERSION WHEN THE PRODUCT IS USED.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
9
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Construction
Epoxy
Encapsulation
Finish Layer
(Sn10/Pb88/Ag2)
Detailed Cross Section
Barrier Layer
(Ni)
Base Metal
(Cu)
Lead Attach Solder
(Sn10/Pb88/Ag2)
Lead Attach Solder
(Sn10/Pb88/Ag2)
Dielectric Material
(CaZrO3)
Inner Electrodes
(Ni)
Finish Layer
(Sn10/Pb88/Ag2)
Barrier Layer
(Ni)
Base Metal
(Cu)
Lead Wire
Core Metal
Barrier Layer 1
Barrier Layer 2
Finish Layer
Inner Electrodes
(Ni)
Epoxy
Encapsulation
Steel
Cu
Ni
Au
Marking
FRONT
BACK
Rated Voltage
(VDC)
Style/Size
Dielectric
Specification/Series
KEMET ID
Rated Capacitance
Capacitance
Tolerance Code
Date Code
Date Code
14
20
Manufacturing Year:
14 = 2014
Manufacturing Week:
20 = Week 20
(of mfg. calendar year)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
10
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Lead Tape & Reel Packaging Information
KEMET offers standard reeling of Molded Radial Leaded
Capacitors in accordance with EIA standard 468. Parts are taped
to a tag board carrier strip, and wound on a reel as shown in
Figure 1. Kraft paper interleaving is inserted between the layers
of capacitors on the reel.
t
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
11
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 3 – Ceramic Radial Tape and Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D0
±0.2 (0.008)
P0
P
P2
±0.3 (0.012) ±0.3 (0.012) ±0.7 (0.028)
ΔH
Maximum
L1
Maximum
t
Maximum
T
Maximum
W
+ 1.0/- 0.5
(+0.039/-0.020)
W0
Minimum
W2
Maximum
4.00 (0.157)
12.7 (0.500) 12.7 (0.500) 6.35 (0.250) 1.0 (0.039)
1.0 (0.039)
0.9 (0.035)
2.0 (0.079)
18.0 (0.709)
5.0 (0.197)
3.0 (0.118)
Variable Dimensions — Millimeters (Inches)
F
+0.6 (0.024)
-0.2 (0.008)
Note 1
P1
±0.7 (0.028)
Note 1
2.54 (0.100)
5.08 (0.200)
4.32 (0.170)
3.89 (0.153)
5.08 (0.200)
3.81 (0.150)
5.59 (0.220)
3.25 (0.128)
6.98 (0.275)
2.54 (0.100)
7.62 (0.300)
2.24 (0.088)
9.52 (0.375)
7.62 (0.300)
10.16 (0.400)
7.34 (0.290)
12.06 (0.475)
6.35 (0.250)
14.60 (0.575)
5.08 (0.200)
17.14 (0.675)
3.81 (0.15)
H
Minimum
Note 2
H0
±0.5 (0.630)
Note 3
18.0 (0.709)
16.0 (0.024)
Symbol Reference Table
D0
P0
P
F
P1
P2
H
H0
H1
ΔH
L1
t
W
W0
W2
Sprocket Hole Diameter
Sprocket Hole Pitch
Component Pitch
Lead Spacing
Sprocket Hole Center to Adjacent Component Lead
Sprocket Hole Center to Component Center
Height to Seating Plane (Straight Leads Only)
Height to Seating Plane (Formed Leads Only)
Component Height Above Tape Center
Component Alignment
Lead Protrusion
Composite Tape Thickness
Carrier Tape Width
Hold-Down Tape Width
Hold-Down Tape Location
1. Measured at the egress from the carrier tape, on the component side.
2. Straight Lead configuration part types only.
3. Formed (bent) lead configuration part types only.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
12
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Wyboston, United Kingdom
Tel: 44-1480-273082
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Northeast
Wilmington, MA
Tel: 978-658-1663
Southeast
Lake Mary, FL
Tel: 407-855-8886
Central
Novi, MI
Tel: 248-994-1030
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Irving, TX
Tel: 972-915-6041
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
13
Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 9/25/2015
14
Similar pages