MAVC-010000-002196 VCO, SMT 2146-2246 MHz Rev. Preliminary Features • • • • High Performance, Low Cost Low Phase Noise Miniature SMT Package (LSM1) RoHS Compliant Description This VCO, in a SMT package, provides electrical shielding, easy PCB assembly and repeatable performance. The oscillator is designed for use in wireless base stations and other applications. M/A-COM VCOs are manufactured in an ISO9001 certified facility, incorporating surface mount assembly and automated electrical testing. This ensures consistent electrical performance and quality over volume production quantities. Pin Configuration Devices are designed to function after exposure to the shock, vibration, thermal shock and moisture conditions typically encountered in base station and other infrastructure environments. Pin No. Function 1 RF Output 2 VCC 3 Vtune 4 GND Electrical Specifications1: Z0 = 50 Ohms, Vcc = 5V. Parameter Frequency Range RF Output Power Test Conditions Over Top 2 Over VCC and Top 2 Units Min MHz 2146 dBm +3.0 +0 Typ 2246 +6 Tuning Voltage Over Top 2 V Phase Noise SSB at 10 kHz offset from carrier SSB at 100 kHz offset from carrier SSB at 1000 kHz offset from carrier dBc/Hz -100 -120 -140 MHz/V 30 Tuning Sensitivity Max +9.0 +5 -95 -115 -135 Harmonic Output (Non Harmonic spurious < -70dBc) dBc -15 -10 Frequency Pushing VCC = +5.25V ± 0.25V MHz/V 1.5 3.0 Frequency Pulling 1.5:1 VSWR load, all phases MHz 0.5 3.0 Tune Input Capacitance Supply Voltage (VCC) pF VCO oscillates Supply Current (ICC) V mA 50 +4.75 +5.00 +5.25 15 30 1. All specification limits are indicated values over the temperature range –40C to 85C. 2. See Absolute Maximum Ratings for operating temperature. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAVC-010000-002196 VCO, SMT 2146-2246 MHz Rev. Preliminary Absolute Maximum Ratings TA = +25°C Parameter Absolute Maximum Supply Voltage (VCC) 4.5V to 5.5 V Operating Temperature -40°C to +85°C Storage Temperature -45°C to +120°C Solder Assembly Temperature See App Note M2032 1. Operation of this device above any one of these parameters may cause permanent damage. Ordering Information Part Number MAVC-010000-002196 Package Tape and Reel (500/Reel) 1 1. See application note M513. Environmental Specifications Devices are designed to function after exposure to vibration, thermal shock and moisture conditions. See MVS Qual Report for details of tests performed. Recommended PCB Layout 1. 2. 3. Tolerance: ±0.1mm View is shown from top of device. Solder masked areas to be left clear. These areas may have active vias. Note: Dimensions in Millimetres. (Inch dimensions for reference only). Outline Drawing 1. 2. 3. 4. 5. Plating: Au, 0.05μm — 0.15μm over Ni barrier of 2.5μm — 5.0μm. Internal Solder: Sn95.5/Ag4.0/Cu0.5, lead free. Substrate: FR4 Cover: mild steel Tolerance: ±0.2mm unless otherwise noted. ECO History Rev Prel Date 16th April 2008 Created data sheet Description By AC 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.