Bourns H-114P Trimpotâ® potentiometer panel mounting options and hardware Datasheet

Factory Installed Panel Mount
TRIMPOT® POTENTIOMETER
PANEL MOUNTING OPTIONS
AND HARDWARE
Many Trimpot Potentiometers are
available for panel mount application.
Models RT12/RJ12, 3057/3059
Models 3005/3006/3009
HEX NUT AND
LOCKWASHER
®
20.32
(.80)
10.31
(.406) MAX.
6.35
(.25)
#10-32 UNF-2A THD.
This product option provides for
maximum design flexibility.
To order Trimpot® Potentiometers with
panel mount hardware attached by the
factory, simply add an “M” or “Z”
suffix to the Bourns part number per
Table I.
2.54
(.100)
7.95
(.313)
33.35
(1.31)
6.35
(.25)
ADJ. SLOT
2.54 LONG
(.100 )
.508
(.020) WIDE
.762
(.030) DEEP
Example:
3006P-1-100Z
BUSHING
10-32
NF-2 THD
To order military Trimpot® Potentiometers
with panel mount hardware attached by
the factory, order the military part
number and add “with panel mount
attached.”
Example:
RT12C2PRC, with panel mount
attached.
6.76 ± .38
(.266 ± .015)
To order panel mounting accessories for
customer installation, simply use the part
number per Table II.
ADJ. SLOT
2.54 LONG
(.100)
.635
(.020) WIDE
.762
(.030) DEEP
Example:
H83P
NOTE: For complete product specifications, see data sheet for the trimmer
model.
3.81
(.150)
1.52 TO 3.30
(.06 TO .13)
7.92
(.312)
PANEL
3.30
MAX.
(0.13)
5.94
(.234)
Torque - Apply maximum 8 in. lbs. on
mounting nut when mounted on panel.
NOTES:
NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
.194
2. RECOMMEND PANEL HOLES. #10 DRILL
(.008)
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
.200
2. RECOMMEND PANEL HOLE SIZE #7 DRILL
(.008)
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Factory Installed Panel Mount
Models RT22/RTR22/RJ22 3250/3252
Models 3292
H and W Styles - 3290 X & W StylesRT24/RTR24
X, L and W Styles
6.10
(.240)
3.05
(.120)
7.62
(.300)
4.06
(.160)
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTIROTATION TAB
ADJ. SLOT
.243 LONG
(.010)
.064
(.003) WIDE
.064
(.003) DEEP
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTIROTATION TAB
6.35
(.250)
3.05
(.120)
ADJ. SLOT
.243 LONG
(.010)
.064
(.003) WIDE
.064
(.003) DEEP
11.68
(.460)
OPT. BEND
DOWN ANTIROTATION TAB
13.97
(.550)
PANEL
3.3
(.130)
MAX
11.43
(.450)
11.68
(.460)
11.43
(.450)
PANEL LAYOUT
.826 ± .038
(.033 ± .020)
PANEL
3.3
(.130)
MAX
10.16
(.400)
PANEL
3.3
(.130)
MAX
PANEL LAYOUT
PANEL LAYOUT
.200
= 7 DRILL
(.008)
.200
= 7 DRILL
(.008)
7.37
(.290)
.200
= 7 DRILL
(.008)
.132 OPTIONAL FOR
(.005) ANTI-ROTATION NUB
.132 OPTIONAL FOR
(.005) ANTI-ROTATION NUB
.132 OPTIONAL FOR
(.005) ANTI-ROTATION NUB
NOTES:
NOTES:
Provided with lockwasher and mounting nut
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
ADJ. SLOT
.243 LONG
(.010)
.064
(.003) WIDE
.064
(.003) DEEP
6.35
(.250)
14.99
(.590)
.826 ± .038
(.033 ± .020)
6.10
(.240)
BUSHING
10-32 UNF-2A
THD.
6.35
(.250)
10.92
(.430)
7.37
(.290)
Models RT24/RTR24/3290
NOTES:
NOTES:
1 Provided with lockwasher and mounting nut
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Customer Installed Panel Mount - Unsealed
SEE TABLE II FOR PANEL MOUNT PART NUMBER
H-58P Panel Mount
H-65P Panel Mount
1-1/4 Inch Rectangular
Multiturn Modules
H-83P Panel Mount
1/2 Inch Square
Multiturn Models
Adapter for Models 3005 AND 3006
HEX NUT AND
LOCKWASHER
10.31
(.406)
MAX.
7.62
(.300)
4.06
(.160)
BUSHING
10-32 UNF-2A
THD.
7.95
(.313)
OPT. BEND
DOWN ANTIROTATION TAB
33.35
(1.31)
The H-83P Adapter is used with Models
3005 and 3006. Order separately and
simply snap fit the trimmer in the plastic
case. The H-83P with lock-washer and
mounting nut is available in 50-piece
lots.
ADJ. SLOT
.243 LONG
(.010)
.064
(.003) WIDE
.064
(.003) DEEP
6.35
(.250)
6.35
(.250)
13.97
(.550)
BUSHING
10-32
NF-2 THD
22.10
(.870)
14.99
(.590)
10.0
(.394)
5/16-32
UNEF
THREAD
11.43
(.450)
1.52
3.30
TO
(.060)
(.130)
5.54
(.218)
3.30
PANEL
MAX.
(0.13)
ADJ. SHAFT
RECESSED 5/16
PANEL LAYOUT
5.94
(.234)
ADJ. SLOT
2.54 LONG
(.100)
.635
(.250) WIDE
.762
(.030 ) DEEP
7.62
(.300)
10.16
(.400)
.200
= 7 DRILL
(.008)
9.53
(.375)
9.53
(.375)
.132 OPTIONAL FOR
(.005) ANTI-ROTATION NUB
NOTES:
NOTES:
NOTES:
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
.194
2. RECOMMEND PANEL HOLES. #10 DRILL
(.008)
1. PROVIDED WITH LOCKWASHER AND MOUNTING
NUT.
1. DRAWINGS SHOWN WITH TRIMMER. ORDER PART
SEPARATELY
2. DRAWINGS SHOWN WITH TRIMMER. ORDER PART
SEPARATELY
*SPECIFY H82 IF PANEL SEAL IS REQUIRED.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Customer Installed Panel Mount
H-114P/115P/116P Panel Mount
3/8 Inch Square Multiturn Models
H-117P Panel Mount
3/8 Inch Square Multiturn Models
6.10
(.240)
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTIROTATION TAB
ADJ. SLOT
.243 LONG
(.010)
.064
(.003) WIDE
.064
(.003) DEEP
11.43
(.450)
(H-115P)
(H-116P)
6.35
(.250)
10.92
(.430)
(H-114P)
11.68
(.460)
8.255
(.325)
(H-114P)
BUSHING
10-32 UNF-2A
THD.
ADJ. SLOT
2.44 DIA.
(.096)
.635
(.025) WIDE
.635
(.025) DEEP
6.10
(.240)
11.68
(.460)
11.68
(.460)
8.179
(.322)
(H-115P)
(H-116P)
2.54
(.100)
2.54
REF.
(.100)
REF.
REF.
3.30
MAX.
(0.13)
PANEL LAYOUT
5.72
(.225)
PANEL LAYOUT
5.08
= 7 DRILL
(.200)
.132 OPTIONAL FOR
(.005) ANTI-ROTATION NUB
7.62
(.300)
P/N WITH
PANEL MOUNT
3005P-1-(RC) Z
3006P,Y, or W-1-(RC) Z
3009P or Y-1-(RC) Z
3057L,J,P, or Y-1-(RC) M
3059L,J,P, or Y-1-(RC) M
3250L or W-1-(RC) M
3252L or W-1-(RC) M
3290H or W-1-(RC) M
3292L,W, or X-1-(RC) M
3296W or X-1-(RC) M
TABLE II
RETRO-FIT PANEL MOUNTS FOR
INSTALLATION BY CUSTOMER
8.76 ± .38
(.345 ± .015)
PANEL
7.37
(.290)
STANDARD P/N
3005P-1-(RC)
3006P,Y, or W-1-(RC)
3009P or Y-1-(RC)
3057L,J,P, or Y-1-(RC)
3059L,J,P, or Y-1-(RC)
3250L or W-1-(RC)
3252L or W-1-(RC)
3290 H or W-1-(RC)
3292L,W, or X-1-(RC)
3296W or X-1-(RC)
6.86
(.270)
4.06
(.160)
3.05
(.120)
TABLE I
FACTORY INSTALLED
PANEL MOUNTS
5.08
DIA.
(.200)
1.32 OPTIONAL FOR
(.052) ANTI-ROTATION LUG
Notes:
1. Provided with lockwasher and
mounting nut.
Notes:
1. Provided with lockwasher and
mounting nut.
2. Drawings shown with trimmer. Order
part separately.
2. Drawings shown with trimmer. Order
part separately.
STANDARD P/N
3005P-1-(RC)
3006P,Y, or W-1-(RC)
3057L,J,P, or Y-1-(RC)
3059L,J,P, or Y-1-(RC)
3250L, W, X-(RC)
3252L or W-1-(RC)
3252X-1-(RC)
3290 H or W-1-(RC)
3292L-1-(RC)
3292W OR X-1-(RC)
RT12P,Y,L
RJ12P,Y
RT22L,W, X,
RTR22L,W, X
RJ22L,W
RJ22X
RT24W /
RTR24W OR X
RJR24W OR X
ORDER PANEL MOUNT
P/N
H-83P
H-83P
H-58P* SCREW ASSY.
H-58P* SCREW ASSY.
H-65P-1*
H-65P-3*
H-65P-5*
H-114P*
H-115P*
H-116P*
H-58P* SCREW ASSY.
H-58P* SCREW ASSY.
H-65P-1*
H-65P-3*
H-65P-5*
H-114P*
H-117P*
*Specify H-82 if panel seal is required.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Hardware For Special Mounting Applications
H-82 Panel Seal
H-25/H-28 Stacking Straps
For all panel mounts with size 10-32
bushings.
Models 3250, 3252 (H-25) and 3292
(H-28).
4.83
(.190)
A
STAINLESS STEEL
CUP WASHER
B
7.37
(.290)
1.02
(.040)
C
.381
(.015)
DIMENSIONS
.89
(.035)
4.83
(.190)
A
B
RUBBER O RING
C
To be used with the following to provide
panel seal:
H-58P
H-65P-1
H-65P-3
H-65P-5
H-114P
H-115P
H-116P
H-117P
THICKNESS
REV. 01/12
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
H-25
.236
(.093)
.363
(.143)
1.321
(.520)
H-28
.178
(.070)
.318
(.125)
1.064
(.419)
.51
(.02)
Similar pages