EPCOS B82803A0105A007 Xdsl splitter transformers ep 7 core inductor Datasheet

xDSL splitter transformers
EP 7 core inductors
Series/Type:
Ordering code:
B82803
Date:
Version:
2010-06-01
1
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
(header 1 + top left bar):
xDSL splitter transformers
Identification/Classification 2
(header 2 + bottom left header bar):
EP 7 core inductors
Ordering code: (top right header bar)
Series/Type: (bottom right header bar)
B82803
Preliminary data (optional):
(if necessary)
Department:
IN TCF PMD NA
Date:
2010-06-01
Version:
1
 EPCOS AG 2010. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
xDSL splitter transformers
EP 7 core inductors
B82803
Applications
 Splitter applications for ADSL and
VDSL
 Telecom applications
Features





Very good inductance symmetry
Space optimized
RoHS-compatible
Excellent THD behaviour
Low DC-resistance
Options
 Other inductance values on request
 Through whole terminations on
request
Delivery mode and packing unit
 24-mm blister tape
 Packing unit: 320 pcs.
Pinning
1
N1 2
4
Dimensions in mm
8
N2
5
IN TCF PMD NA
Please read Cautions and warnings and
Important notes at the end of this document.
2010-06-01
Page 2 of 5
xDSL splitter transformers
EP 7 core inductors
B82803
Technical data and measuring conditions
Main inductance L (1-8)
10 kHz, 100 mV, short 4-5
Main inductance tolerance
±10%
Turns ratio N1 : N2
1:1
Inductance decrease with DC-bias L (1-8), IDC= 100 mA
2% (typical)
Inductance match L (1-4) / L (5-8)
≤ 1%
Interwinding capacitance: Ci (1,4 – 5,8)
100 kHz, 100 mV
Test voltage Vtest
50 Hz, 1s; N1 against N2
Resistance RDC (N1 + N2)
short 4-5
Stray inductance Lstray (1-5)
100 kHz, 100 mV, short 5-8
Operating temperature range
–40 … +85 °C
Weight
Approx. 2.0 g
Electrical specifications and ordering codes
L
RDC (typ.) Lstray (typ.)
Ci (typ.)
Vtest
mH
Ω
µH
pF
V
1
0.8
0.7
33
1500
B82803A0105A007
1.5
1.4
1.4
37
1500
B82803A0155A007
2.2
2.4
2.7
40
1500
B82803A0225A007
2.7
3.6
2.9
45
1500
B82803A0275A007
3.3
5.0
4.0
45
1000
B82803A0335A007
4.7
5.8
5.3
45
1000
B82803A0475A007
6.8
9.8
10.0
45
1000
B82803A0685A007
20.0
13.0
45
800
B82803A0106A007
10
Ordering code
IN TCF PMD NA
Please read Cautions and warnings and
Important notes at the end of this document.
2010-06-01
Page 3 of 5
xDSL splitter transformers
EP 7 core inductors
B82803
Cautions and warnings
Please note the recommendations in our Inductors data book (latest edition) and in the data sheets
- Particular attention should be paid to the derating curves given there.
- The soldering conditions should be observed. Temperatures quoted in relation to wave soldering
refer to the pin, not the housing.
If the components are to be washed varnished it is necessary to check whether the washing varnish
agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued
joints. In particular, it is possible for washing varnish agent residues to have a negative effect in the
long-term on wire insulation.
The following points must be observed if the components are potted in customer applications:
- Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
- It is necessary to check whether the potting material used attacks or destroys the wire insulation,
plastics or glue.
- The effect of the potting material can change the high-frequency behaviour of the components.
Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to breakage
of the core.
Even for customer-specific products, conclusive validation of the component in the circuit can only be
carried out- Even for customer-specific products, conclusive validation of the component in the circuit
can only be carried out by the customer. by the customer.
IN TCF PMD NA
Please read Cautions and warnings and
Important notes at the end of this document.
2010-06-01
Page 4 of 5
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic,
DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube,
PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer,
SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe
and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
Page 5 of 5
Similar pages