FHS-A9015S00 DELTA ELECTRONICS, INC. Application: Picture: Intel Nehalem LGA1156 (45nm) & Intel Sandy Bridge LGA1155 (32nm) Thermal & Mechanical Spec Thermal performance for 45 W CPU HSK Assembly Weight: 120 g (ref.) Clipping Force: 16 Kgf (ref.) Component Specification: 1. Heat Sink Type: Thermal Shrink Material: Aluminum A6063 Dimension: 90*90*30 mm 2. Thermal interface material Material: Dow Corning TC-5630 or Equivalent. 3. Fan (90x90x17 mm with Thermistor & PWM Control) Rated Voltage: 12 V Life Time: Superflo bearing 50000 hrs Connector: a. Lead wire: UL 10368 -F- AWG#28 pin 1: black wire--------(-) pin 2: yellow wire----------(+) pin 3: green wire---------(F00) pin 4: blue wire------------(PWM) b. Housing: Molex 47054-1000 or equivalent c. Terminal: Molex 2759T 08-50-0113 or equivalent * All readings are typical values at rated voltage. * Specifications are subject to change without notice DELTA ELECTRONICS, INC. 252, Shang Ying Road, Kuei San TAOYUAN SHIEN 333, TAIWAN,R.O.C. TEL: 886-3-3591968 EXT 2073 FAX: 886-3-3591991 DELTA PRODUCTS CORPORATION 4405 CUSHING PARKWAY FREMONT, CA 94538, U.S.A. TEL: 1-510-668-5100 FAX: 1-510-668-0680 DELTA ELECTRONICS(JAPAN), INC. DELTA SHIBADAIMON BLDG. 2-1-14 SHIBADAIMON, MINATO-KU, TOKYO, 105-0012, JAPAN TEL: 81-3-5733-1111 FAX: 81-3-5733-1211 DELTA ELECTRONICS EUROPE LTD. WEGALAAN 16, 2132 JC HOOFDDORP, THE NETHERLANDS TEL: 31-23-566-8989 FAX: 31-23-5668910 Date: July-2009 Delta Electronics Corp. APPROVAL SHEET Customer Name： ： Model Name： ： COOLER Model Name： ： FHS-A9015S00 Customer Part No： ： Spec Issue Date： ： 2015/12/14 Spec Revision： ： 02 PLEASE SEND ONE COPY OF THIS SPECIFICATION BACK AFTER YOU SIGNED APPROVAL FOR PRODUCTION PRE-ARRANGMENT. Approved By: Date: Approval Check Designer Skyler.Huang Form No. ︰tMP—D029 Form Rev. ︰00 Delta Electronics Corp. REV. Description Drawn Checked Approved Issue Date 00 ISSUE SPEC REEK.LI2011/11/25 01 ADD ROHS Skyler 2013/03/08 Skyler 2015/12/14 2011/11/25 2011/11/25 2011/11/25 1. Change the grease from 02 TC-1996 to TC-5630 2. Update RoHS Description: SAMPLE REVISION CODE LIST Part No. REV DELTA MODEL : FHS-A9015S00 Form No. ︰tMP—D029 TOTAL 78 PAGE Form Rev. 02 ︰00 Delta Electronics Corp. CONTENTS Item Element Description Page 1 Specification 5 2 Print 6 3 Packing Plan 14 4 Fan 17 5 RoHS Certification 28 Form No. ︰tMP—D029 Note Form Rev. ︰00 Delta Electronics Corp. 1. SPECIFICATION Characters Item Scope Description THIS SPECIFICATION DEFINES THE ELECTRICAL AND MECHANICAL CHARACTERISTICS OF THE HEATSINK Application Specification a: thermal Resistance b: total weight c: clip force INTEL CPU COOLER ℃ 0.52 ( /W) (REF.) 120 g (REF.) 16 kgf (REF.) BOM Item Form No. Part Name Material Part NO. Q’TY 1 Heatsink A6063-T5 3346771500 1 pce 2 FASTENER CAP PC 3470415400 4 pce 3 FASTENER BASE PC 3470415500 4 pce 4 LABEL PE 3267128700 1 pce 5 FAN PBT 3622920411 1 pce 6 TIM DOW TC-5630 4021107300 0.12g ︰tMP—D029 Remark Rev 02 Form Rev. ︰00 Delta Electronics Corp. 2. PRINT Assembly Drawing Form No. ︰tMP—D029 Form Rev. ︰00 Delta Electronics Corp. Parts Drawing Form No. ︰tMP—D029 Form Rev. ︰00 Delta Electronics Corp. 3. PACKING PLAN Packing Specification Form No. ︰tMP—D029 Form Rev. ︰00 Delta Electronics Corp. 4. FAN Form No. ︰tMP—D029 Form Rev. ︰00 SPECIFICATION FOR APPROVAL Customer TMPBU Description DC FAN Part No. REV. Delta Model No. AUC0912D-AF1F REV. 00 Sample Issue No. Sample Issue Date SEP.15.2010 PLEASE SEND ONE COPY OF THIS SPECIFICAITON BACK AFTER YOU SIGNED APPROVAL FOR PRODUCTION PRE-ARRANGMENT. APPROVED BY: DATE : DELTA ELECTRONICS, INC. TAOYUAN PLANT 252, SHANG YING ROAD, KUEI SAN INDUSTRIAL ZONE TAOYUAN SHIEN, TAIWAN, R.O.C. TEL:886-(0)3-3591968 FAX:886-(0)3-3591991 Application Notice 1. Delta will not guarantee the performance of the products if the application condition falls outside the parameters set forth in the specification. 2. A written request should be submitted to Delta prior to approval if deviation from this specification is required. 3. Please exercise caution when handling fans. Damage may be caused when pressure is applied to the impeller, if the fans are handled by the lead wires, or if the fan was hard-dropped to the production floor. 4. Except as pertains to some special designs, there is no guarantee that the products will be free from any such safety problems or failures as caused by the introduction of powder, droplets of water or encroachment of insect into the hub. 5. The above-mentioned conditions are representative of some unique examples and viewed as the first point of reference prior to all other information. 6. It is very important to establish the correct polarity before connecting the fan to the power source. Positive (+) and Negative (-). Damage may be caused to the fans if connection is with reverse polarity, if there is no foolproof method to protect against such error specifically mentioned in this spec. 7. Delta fans without special protection are not suitable where any corrosive fluids are introduced to their environment. 8. Please ensure all fans are stored according to the storage temperature limits specified. Do not store fans in a high humidity environment. We highly recommend performance testing is conducted before shipping, if the fans have been stored over 6 months. 9. Not all fans are provided with the Lock Rotor Protection feature. If you impair the rotation of the impeller for the fans that do not have this function, the performance of those fans will lead to failure. 10. Please be cautious when mounting the fan. Incorrect mounting of fans may cause excess resonance, vibration and subsequent noise. 11. It is important to consider safety when testing the fans. A suitable fan guard should be fitted to the fan to guard against any potential for personal injury. 12. Except where specifically stated, all tests are carried out at room (ambient) temperature and relative humidity conditions of 25oC, 65% RH. The test value is only for fan performance itself. 13. Be certain to connect an “ 4.7µF or greater” capacitor to the fan externally when the application calls for using multiple fans in parallel, to avoid any unstable power. Doc. No: FMBG-ES Form 001 Rev. 0001 Date: June 24, 2009 Delta Electronics Corp. 5. ROHS 5.1. PBT 5.2. AL6063-T5 5.3. PC 5.4. PET、INK、COATING 5.5. DOW TC-5630 Form No.︰tMP—D029 Form Rev.︰00 Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Page 1 of 13. KINGFA SCI. & TECH. CO., LTD. . NO.33 KEFENG ROAD,SCIENCE CITY,GUANGZHOU HI-TECHINDUSTRIAL DEVELOPMENT ZONE,GUANGZHOU CITY CHINA. . The following sample(s) was/were submitted and identified on behalf of the clients as : PBT-NPG30 . SGS Job No. : CP15-009615 - GZ . Date of Sample Received : . 09 Mar 2015. Testing Period : . 09 Mar 2015 - 13 Mar 2015 . Test Requested : . Selected test(s) as requested by client. . Test Method : . Please refer to next page(s). . Test Results : . Please refer to next page(s). . Conclusion :. Based on the performed tests on submitted sample(s), the results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBBs), Polybrominated diphenyl ethers (PBDEs) comply with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC. . Signed for and on behalf of SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch. Alkene Liang. Approved Signatory . Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Page 2 of 13. Test Results : . Test Part Description : . Specimen No.. SN1. SGS Sample ID. CAN15-030477.002 Description. Black plastic grains . Remarks :. (1) 1 mg/kg = 0.0001% . (2) MDL = Method Detection Limit . (3) ND = Not Detected ( < MDL ) . (4) "-" = Not Regulated . RoHS Directive 2011/65/EU. Test Method : . (1)With reference to IEC 62321-5:2013, determination of Cadmium by ICP-OES. (2)With reference to IEC 62321-5:2013, determination of Lead by ICP-OES. (3)With reference to IEC 62321-4:2013, determination of Mercury by ICP-OES. (4)With reference to IEC 62321:2008, determination of Hexavalent Chromium by Colorimetric Method using UV-Vis. (5)With reference to IEC 62321:2008, determination of PBBs and PBDEs by GC-MS. . Test Item(s). Limit. Unit. MDL. 002. Cadmium (Cd) . 100 mg/kg. 2 ND Lead (Pb). 1,000 mg/kg. 2 5 Mercury (Hg). 1,000 mg/kg. 2 ND Hexavalent Chromium (CrVI) . 1,000 mg/kg. 2 ND Sum of PBBs . 1,000 mg/kg. - ND Monobromobiphenyl . - mg/kg. 5 ND Dibromobiphenyl . - mg/kg. 5 ND Tribromobiphenyl . - mg/kg. 5 ND Tetrabromobiphenyl . - mg/kg. 5 ND Pentabromobiphenyl . - mg/kg. 5 ND Hexabromobiphenyl . - mg/kg. 5 ND Heptabromobiphenyl . - mg/kg. 5 ND Octabromobiphenyl . - mg/kg. 5 ND Nonabromobiphenyl . - mg/kg. 5 ND Decabromobiphenyl . Sum of PBDEs . Monobromodiphenyl ether . - mg/kg. 5 ND 1,000 mg/kg. - ND - mg/kg. 5 ND Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Limit. Unit. MDL. 002. Dibromodiphenyl ether . - mg/kg. 5 ND Tribromodiphenyl ether . - mg/kg. 5 ND Tetrabromodiphenyl ether . - mg/kg. 5 ND Pentabromodiphenyl ether . - mg/kg. 5 ND Hexabromodiphenyl ether . - mg/kg. 5 ND Heptabromodiphenyl ether . - mg/kg. 5 ND Octabromodiphenyl ether . - mg/kg. 5 ND Nonabromodiphenyl ether . - mg/kg. 5 ND Decabromodiphenyl ether . - mg/kg. 5 ND Test Item(s). Page 3 of 13. Notes :. (1) The maximum permissible limit is quoted from the directive 2011/65/EU, Annex II . Halogen. Test Method : . With reference to EN 14582: 2007, analysis was performed by Ion Chromatograph (IC). . Test Item(s). Chlorine (Cl). Bromine (Br). Unit. MDL. 002. mg/kg. mg/kg. 50 50 ND ND Elementary Analysis. Test Method : . With reference to US EPA Method 3052:1996, analysis was performed by ICP-OES. . Test Item(s). Sb₂O₃. Unit. MDL. 002. mg/kg. 12 ND Notes :. (1) ◆ Calculated concentration of Sb₂O₃ is based on the identified Sb . Polynuclear Aromatic Hydrocarbons (PAHs). Test Method : . With reference to ZEK 01.4-08 of German ZLS and its amendments, analysis was performed by GC-MS.. Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . CAS NO. Unit. MDL. 002. Naphthalene(NAP) . 91-20-3. mg/kg. 0.1 ND Acenaphthylene(ANY) . 208-96-8. mg/kg. 0.1 ND Acenaphthene(ANA) . 83-32-9. mg/kg. 0.1 ND Fluorene(FLU) . 86-73-7. mg/kg. 0.1 ND Phenanthrene(PHE) . 85-01-8. mg/kg. 0.1 ND Anthracene(ANT) . 120-12-7. mg/kg. 0.1 ND Fluoranthene(FLT) . 206-44-0. mg/kg. 0.1 ND Pyrene(PYR) . 129-00-0. mg/kg. 0.1 ND Benzo(a)anthracene(BaA) . 56-55-3. mg/kg. 0.1 ND Chrysene(CHR) . 218-01-9. mg/kg. 0.1 ND 205-99-2/205-82-3 . 207-08-9. mg/kg. 0.1 ND mg/kg. 0.1 ND Benzo(e)pyrene(BeP) . 192-97-2. mg/kg. 0.1 ND Benzo(a)pyrene(BaP) . 50-32-8. mg/kg. 0.1 ND Indeno(1,2,3-c,d)pyrene(IPY) . 193-39-5. mg/kg. 0.1 ND Dibenzo(a,h)anthracene(DBA) . 53-70-3. mg/kg. 0.1 ND Benzo(g,h,i)perylene(BPE) . 191-24-2. mg/kg. 0.1 ND mg/kg. - ND Test Item(s). Benzo(b)fluoranthene(BbF) + Benzo(j)fluoranthene(BjF) . Benzo(k)fluoranthene(BkF) . Sum of 18 PAHs . Page 4 of 13. Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Phthalate. Test Method : . With reference to EN14372: 2004. Analysis was performed by GC-MS. . CAS NO. Unit. MDL. 002. Dibutyl Phthalate (DBP) . 84-74-2. %(w/w). 0.003 ND Benzylbutyl Phthalate (BBP) . 85-68-7. %(w/w). 0.003 ND Bis(2-ethylhexyl) Phthalate (DEHP). 117-81-7. %(w/w). 0.003 ND Diisononyl Phthalate (DINP) . 28553-12-0 / 68515-48-0. %(w/w). 0.010 ND Di-n-octyl Phthalate (DNOP) . 117-84-0. %(w/w). 0.003 ND Test Item(s). Page 5 of 13. Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . CAS NO. Unit. MDL. 002. 26761-40-0 / 68515-49-1. %(w/w). 0.010 ND Dimethyl Phthalate (DMP) . 131-11-3. %(w/w). 0.003 ND Diethyl Phthalate (DEP) . 84-66-2. %(w/w). 0.003 ND Diisobutyl Phthalate (DIBP) . 84-69-5. %(w/w). 0.003 ND Dinonyl Phthalate (DNP) . 84-76-4. %(w/w). 0.003 ND 27554-26-3. %(w/w). 0.010 ND Dipropyl Phthalate (DPrP) . 131-16-8. %(w/w). 0.003 ND Dicyclohexyl Phthalate (DCHP) . 84-61-7. %(w/w). 0.003 ND Di-n-pentyl Phthalate (DnPP) . 131-18-0. %(w/w). 0.003 ND Dibenzyl Phthalate (DBzP) . 523-31-9. %(w/w). 0.003 ND Diphenyl Phthalate (DPhP) . 84-62-8. %(w/w). 0.003 ND Di-n-hexyl Phthalate (DnHP) . 84-75-3. %(w/w). 0.003 ND Test Item(s). Diisodecyl Phthalate (DIDP) . Diisooctyl Phthalate (DIOP) . Page 6 of 13. Notes :. (1)DBP,BBP,DEHP Reference information: Entry 51 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 2005/84/EC): i) Shall not be used as substances or in mixtures, in concentrations greater than 0.1 % by weight of the plasticised material, in toys and childcare articles. Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Page 7 of 13. ii) Toys and childcare articles containing these phthalates in a concentration greater than 0.1 % by weight of the plasticised material shall not be placed on the market. Please refer to Regulation (EC) No 552/2009 to get more detail information (2)DINP, DNOP, DIDP Reference information: Entry 52 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 2005/84/EC). i) Shall not be used as substances or in mixtures, in concentrations greater than 0.1 % by weight of the plasticised material, in toys and childcare articles which can be placed in the mouth by children. ii) Such toys and childcare articles containing these phthalates in a concentration greater than 0.1 % by weight of the plasticised material shall not be placed on the market. Please refer to Regulation (EC) No 552/2009 to get more detail information . Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Page 8 of 13. ATTACHMENTS RoHS Testing Flow Chart 1) Name of the person who made testing: Bruce Xiao / Sunny Hu 2) Name of the person in charge of testing: Bella Wang / Cutey Yu 3) These samples were dissolved totally by pre -conditioning method according to below flow chart (Cr6+ and PBBs/PBDEs test method excluded ). Sample Preparation Sample Measurement Pb/Cd/Hg Acid digestion with microwave/ hotplate Sample solvent extraction Filtration Concentration/ Dilution of extraction solution Solution Residue Filtration 1) Alkali Fusion / Dry Ashing 2) Acid to dissolve ICP-OES/AAS DATA Cr6+ PBBs/PBDEs GC-MS DATA Nonmetallic material Adding digestion reagent Heating to 90~95℃ for extraction Filtration and pH adjustment Adding 1,5diphenylcarbazide for color development Metallic material Positive Spot test Negative Boiling water extraction Adding 1,5diphenylcarbazide for color development UV-Vis A red color indicates the presence of Cr 6+. If necessary , confirm with UV-Vis. DATA DATA Test Report. No. CANEC1503047702 ATTACHMENTS Phthalates Testing Flow Chart 1) Name of the person who made testing: Sunny Hu 2) Name of the person in charge of testing: Cutey Yu Sample cutting / preparation Sample Measurem ent Solvent extraction Concentration/Dilution Filtration GC-MS DATA Date: 13 Mar 2015 . Page 9 of 13. Test Report. No. CANEC1503047702 ATTACHMENTS PAHs Testing Flow Chart 1) Name of the person who made testing: Sunny Hu 2) Name of the person in charge of testing: Cutey Yu Sample cutting / preparation Sample Measurement Solvent extraction Concentration/Dilution Filtration GC-MS DATA Date: 13 Mar 2015 . Page 10 of 13. Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . ATTACHMENTS Halogen Testing Flow Chart 1) Name of the person who made testing: Hanming Xiao 2) Name of the person in charge of testing: Bella Wang Sample cutting / preparation Sample Measur ement Combustion in oxygen bomb Dissolved in an absorption solution Filtration Analyzed by ion chromatography. Double confirm by other instruments, if necessary DATA Page 11 of 13. Test Report. No. CANEC1503047702 ATTACHMENTS Elementary Testing Flow Chart 1) Name of the person who made testing : Bruce Xiao 2) Name of the person in charge of testing : Bella Wang Sample cutting / preparation Sample Measurement Acid digestion Filtration Solution ICP-OES/AAS DATA Date: 13 Mar 2015 . Page 12 of 13. Test Report. No. CANEC1503047702 Date: 13 Mar 2015 . Sample photo: . CANEC1503047702 CAN15-030477.002 . SGS authenticate the photo on original report only . *** End of Report *** . Page 13 of 13. !" # " " % &% '($ -" %$ &" )& $ * $ & &% "+" $# +& ",$ .//012/34050 672188181187./.9/1 ': /621162//; 1/ ++7 )" < :) " / 9 )" < +2/91=8 < 1 18 <: >68 +/9834 >687;9/1 .8 / ?34 6/ / ?34 9/61 +18 87./ ++: + 8 %9.,6 =8+1 ; @8. 28672182/34$. 6/8$ 96 ;$ 82162$&?=/9. 216292/;01../1217;&+ 1 91=55% ?""A 915<5% 6/ 9 11 +912 + +++2/" : 9 11 +1/= ;2/ 2 B 3425BC2C D 34C.891121 3'4 C 983E4 34F:FC 6/8 &+1 91=55% .8 34*1. 9"% ':'$8 211 821627;" : %+ 34*1. 9"% ':'$8 21187;" : %+ 3'4*1. 9"% ':'$8 211 96 ;7;" : %+ 34*1. 9"% 'G$8 211&?=/ . 21627;5 / 12 19.861-:-1 "234 121 1 821623 84 8374 $ 25B 25B 96 ;3&4 &?=/ . 21623 $ : 25B : H 1= -"4 34.2?1262 2117//1211>68 2.81 91=55%$ ?"" 34I+: 1=C 79 -"91$11=C 9 -"91A 3.82/.6/876 . = 1187;71/1:0 :? 912.81. 6/1 1= 9791 28 4 I@1/1:0 :? 91 1=C 79 -"91 11=C 9 -"91A.89899 1171/1:0 :? 91/611 >6/ . 25B01.922/6 9 " 21 98118 86918.82/16=1/7/8.6 6/ 3-"4 6.2/.121 ' &% + 4 2. 0.281 @ 69!1 4 2. 19. 1 @//* '4.2/0 81/=8//;7; :981112.899 8 17/0/09. 3 J2.8?9/688 4 J #1/ 1 +/61 4 /B/1#615 ; .1 4 918 81/= //19 2 1/ 881811 11= + 186 " : %+5 2//19 2 1/ + &1 <K<L ? 91 #1/ 18 &8M62 881$: 81.;/9 7N18 9/ 8=/2 1= @1/10 ? 91 881$: 81.;/9 7N18 9/ 8=/2 -:-1 89/ 1819. 9 J " 9 ; $91 2 01.-:-1 +2/. : ++6.19.. 11/ /; OOO%8 OOO 01-March-2010 Dear Valued Customer, Subject: Status of our products with respect to RoHS Directive 2002/95/EC (and its amendments) Thank you for using SABIC INNOVATIVE PLASTICS’ products. With reference to your request for the information regarding status of our Products with respect to the RoHS Directive 2002/95/EC (and its amendments), SABIC INNOVATIVE PLASTICS can provide following information: The CYCOLAC*, CYCOLOY*, EXTEM*, GELOY*, LEXAN*, NORYL*, NORYL GTX*, NORYL PPX*, ULTEM*, VALOX*, XENOY*, XYLEX* resins and, COLORCOMP*, FARADEX*, KONDUIT*, LUBRICOMP*, LUBRILOY*, STARAMIDE* STARFLAM*, STAT-KON*, STAT-LOY*, THERMOCOMP*, THERMOTUF*, VERTON* compounds [all existing grade-colors, except those which are designed to consume Post Consumer Recycle (PCR)] do not contain any chemicals listed below as intentionally added components or as expected process impurities [above threshold limits of 0.1% for Lead, Mercury, Hexavalent Chromium, PBB and PBDE, and 0.01% for Cadmium] • • • • • • Cadmium and its compounds Lead and its compounds Mercury and its compounds Hexavalent Chromium compounds Polybrominated biphenyls (PBBs) Polybrominated diphenyl ethers (PBDEs including Deca-BDE) Please note that analysis of the raw materials and/or finished goods for presence of the above mentioned substances on a routine basis is neither a part of our quality control plan, nor is a part of the SABIC-IP product specifications, and hence it should not be construed as any warranty, expressed or implied. Please be informed that, certain SABIC-IP products are designed to consume PCR for environmental waste reduction. The details about use of the PCR, if any, are stated in the respective MSDS. Please contact our Customer Service or Product Stewardship team to request information regarding the chemical compliance attributes of these products, which may differ from those contained in this letter. Page: 1 of 2 RoHS_L_03_10_G_Resin(Version-3).doc If you have any further questions, or you require any additional information, please contact: [email protected] (Phone: +91 265 3068501) or [email protected] (Phone: +86 20 38488383 3003) Sincerely, Gregory Porta, Ph.D. for SABIC Innovative Plastics Encl: Nil Gregory Porta, Ph.D. Director-Product Stewardship & Toxicology T: 1-304-863-7594 F: 1-304-863-7693 E: [email protected] ANY SALE OF PRODUCTS OR DELIVERY OF CUSTOMER SUPPORT AND ADVICE BY SABIC INNOVATIVE PLASTICS HOLDING BV, ITS SUBSIDIARIES AND AFFILIATES (“SELLER”), IS MADE EXCLUSIVELY UNDER SELLER’S STANDARD CONDITIONS OF SALE which can be located at http://www.sabic-ip.com. SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OF ITS PRODUCTS IN ANY CUSTOMER’S APPLICATION. Each customer should determine the suitability of SELLERS materials for the customer’s particular use through appropriate testing and analysis. SABIC Innovative Plastics is a trademark of SABIC Holding Europe BV * Trademark of SABIC Innovative Plastics IP BV This version for the letter supersedes all previous versions of it on the same subject. Page: 2 of 2 RoHS_L_03_10_G_Resin(Version-3).doc Test Report. No. CANEC1517788106 Date: 22 Oct 2015 . Page 1 of 8. FOUR PILLARS INDUSTRIAL(SHENZHEN)CO.,LTD. . FOUR PILLARS TECHNOLOGIES & APPLIED MATERIALS(SHENZHEN)CO.,LTD. FIRST AND SECOND BUILDING,THIRD INDUSTRIAL ZONE,FENGHUANG COUNTRY,FUYONG TOWN,BAOAN DISTRICT,SHENZHEN ,CHINA . . The following sample(s) was/were submitted and identified on behalf of the clients as : Label . SGS Job No. : CP15-058194 - SZ . Lot No. :. 40371004. Model No. :. PO32AZ. Client Ref. Info. : . PO32AZ，PO3BZ，PO3MAZ，PO3MZ，PO6BZ，PO6GZ，. PO6LZ，PO6MZ, PO6NZ ，PO6TZ，PO6WZ，PO72AZ，. PO72BZ，PO72TZ，PO72Z，PO7MCZ, PO7YZ ，PO7NZ，. PO92Z，PO94AZ，PO9BHZ，PO9LZ，PO9MGZ，PO9MHZ，. PO9MZ，PO9WZ,POBDZ,POBEZ,POBGZ,POBHZ,POBKZ, . PO3BWZ，PO5MZ, PO9BZ ，PO4MHZ，PO7YBZ. Manufacturer : . FOUR PILLARS INDUSTRIAL(SHENZHEN)CO.,LTD. . FOUR PILLARS TECHNOLOGIES & APPLIED MATERIALS(SHENZHEN)CO.,LTD. . Manufacturer Address : . FIRST AND SECOND BUILDING,THIRD INDUSTRIAL ZONE,FENGHUANG COUNTRY,FUYONG TOWN,BAOAN DISTRICT,SHENZHEN ,CHINA . Date of Sample Received : . 19 Oct 2015. Testing Period : . 19 Oct 2015 - 22 Oct 2015 . Test Requested : . Selected test(s) as requested by client. . Test Method : . Please refer to next page(s). . Test Results : . Please refer to next page(s). . Conclusion :. Based on the performed tests on selected part of submitted sample(s), the results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBBs), Polybrominated diphenyl ethers (PBDEs) and Phthalates such as Bis(2-ethylhexyl) phthalate (DEHP) , Butyl benzyl phthalate (BBP), Dibutyl phthalate (DBP) , and Diisobutyl phthalate (DIBP) comply with the limits as set by RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU. . Test Report. No. CANEC1517788106 Date: 22 Oct 2015 . Signed for and on behalf of SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch. Violet,Shi. Approved Signatory . Page 2 of 8. Test Report. No. CANEC1517788106 Date: 22 Oct 2015 . Page 3 of 8. Test Part Description : . Specimen No.. SN1. SGS Sample ID. CAN15-177881.006 Description. Silver-grey adhesive sheet . Remarks :. (1) 1 mg/kg = 1 ppm = 0.0001% . (2) MDL = Method Detection Limit . (3) ND = Not Detected ( < MDL ) . (4) "-" = Not Regulated . RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU. Test Method : . (1)With reference to IEC 62321-5:2013, determination of Cadmium by ICP-OES. (2)With reference to IEC 62321-5:2013, determination of Lead by ICP-OES. (3)With reference to IEC 62321-4:2013, determination of Mercury by ICP-OES. (4)With reference to IEC 62321:2008, determination of Hexavalent Chromium by Colorimetric Method using UV-Vis. (5)With reference to IEC 62321-6:2015, determination of PBBs and PBDEs by GC-MS. (6)With reference to EN 14372:2004, determination of phthalates by GC-MS. . Test Item(s). Limit. Unit. MDL. 006. Cadmium (Cd) . 100 mg/kg. 2 ND Lead (Pb). 1,000 mg/kg. 2 ND Mercury (Hg). 1,000 mg/kg. 2 ND Hexavalent Chromium (CrVI) . 1,000 mg/kg. 2 ND Sum of PBBs . 1,000 mg/kg. - ND Monobromobiphenyl . - mg/kg. 5 ND Dibromobiphenyl . - mg/kg. 5 ND Tribromobiphenyl . - mg/kg. 5 ND Tetrabromobiphenyl . - mg/kg. 5 ND Pentabromobiphenyl . - mg/kg. 5 ND Hexabromobiphenyl . - mg/kg. 5 ND Heptabromobiphenyl . - mg/kg. 5 ND Octabromobiphenyl . - mg/kg. 5 ND Nonabromobiphenyl . - mg/kg. 5 ND Decabromobiphenyl . - mg/kg. 5 ND Sum of PBDEs . Monobromodiphenyl ether . 1,000 mg/kg. - ND - mg/kg. 5 ND Test Report. No. CANEC1517788106 Date: 22 Oct 2015 . Limit. Unit. MDL. 006. Dibromodiphenyl ether . - mg/kg. 5 ND Tribromodiphenyl ether . - mg/kg. 5 ND Tetrabromodiphenyl ether . - mg/kg. 5 ND Pentabromodiphenyl ether . - mg/kg. 5 ND Hexabromodiphenyl ether . - mg/kg. 5 ND Heptabromodiphenyl ether . - mg/kg. 5 ND Octabromodiphenyl ether . - mg/kg. 5 ND Nonabromodiphenyl ether . - mg/kg. 5 ND Test Item(s). Decabromodiphenyl ether . - mg/kg. 5 ND Dibutyl phthalate (DBP) . 1,000 mg/kg. 30 ND Butyl benzyl phthalate (BBP) . 1,000 mg/kg. 30 ND Bis (2-ethylhexyl) phthalate (DEHP) . 1,000 mg/kg. 30 ND Diisobutyl Phthalates (DIBP) . 1,000 mg/kg. 30 ND Page 4 of 8. Notes :. (1) The maximum permissible limit is quoted from RoHS Directive (EU) 2015/863. . Halogen. Test Method : . With reference to EN 14582: 2007, analysis was performed by Ion Chromatograph (IC). . Test Item(s). Fluorine (F). Chlorine (Cl). Bromine (Br). Iodine (I). Unit. MDL. 006. mg/kg. mg/kg. mg/kg. mg/kg. 50 50 50 50 ND ND ND ND Test Report. No. CANEC1517788106 Date: 22 Oct 2015 . Page 5 of 8. ATTACHMENTS RoHS Testing Flow Chart 1) Name of the person who made testing: Bruce Xiao / Sunny Hu 2) Name of the person in charge of testing: Bella Wang / Cutey Yu 3) These samples were dissolved totally by pre -conditioning method according to below flow chart (Cr6+ and PBBs/PBDEs test method excluded ). Sample Preparation Sample Measurement Pb/Cd/Hg Acid digestion with microwave/ hotplate Sample solvent extraction Filtration Concentration/ Dilution of extraction solution Solution Residue Filtration 1) Alkali Fusion / Dry Ashing 2) Acid to dissolve ICP-OES/AAS DATA Cr6+ PBBs/PBDEs GC-MS DATA Nonmetallic material Adding digestion reagent Heating to 90~95℃ for extraction Filtration and pH adjustment Adding 1,5diphenylcarbazide for color development Metallic material Positive Spot test Negative Boiling water extraction Adding 1,5diphenylcarbazide for color development UV-Vis A red color indicates the presence of Cr 6+. If necessary , confirm with UV-Vis. DATA DATA Test Report. No. CANEC1517788106 ATTACHMENTS Phthalates Testing Flow Chart 1) Name of the person who made testing: Sunny Hu 2) Name of the person in charge of testing: Cutey Yu Sample cutting / preparation Sample Measurem ent Solvent extraction Concentration/Dilution Filtration GC-MS DATA Date: 22 Oct 2015 . Page 6 of 8. Test Report. No. CANEC1517788106 Date: 22 Oct 2015 . ATTACHMENTS Halogen Testing Flow Chart 1) Name of the person who made testing: Hanming Xiao 2) Name of the person in charge of testing: Bella Wang Sample cutting / preparation Sample Measur ement Combustion in oxygen bomb Dissolved in an absorption solution Filtration Analyzed by ion chromatography. Double confirm by other instruments, if necessary DATA Page 7 of 8. Test Report. No. CANEC1517788106 Date: 22 Oct 2015 . Sample photo: . CANEC1517788106 CAN15-177881.006 . SGS authenticate the photo on original report only . *** End of Report *** . Page 8 of 8. Test Report. No. SHAEC1515770519 Date: 13 Aug 2015 . Page 1 of 5. NANTONG DIC COLOR CO.,LTD . NO 11 ZHONGYANG ROAD NANTONG ECONOMIC&TECHNOLOGICAL DEVELOPMENT AREA JIANGSU PROVINCE . . The following sample(s) was/were submitted and identified on behalf of the clients as : DRAGON-FC BLACK . SGS Job No. : SP15-026570 - SH . Date of Sample Received : . 06 Aug 2015. Testing Period : . 06 Aug 2015 - 13 Aug 2015 . Test Requested : . Selected test(s) as requested by client. . Test Method : . Please refer to next page(s). . Test Results : . Please refer to next page(s). . Conclusion :. Based on the performed tests on submitted sample(s), the results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBBs), Polybrominated diphenyl ethers (PBDEs) comply with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC. . Signed for and on behalf of SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.. Terry Wang. Approved Signatory . Test Report. No. SHAEC1515770519 Date: 13 Aug 2015 . Page 2 of 5. Test Results : . Test Part Description : . Specimen No.. SN1. SGS Sample ID. SHA15-157705.015 Description. Black mud. Remarks :. (1) 1 mg/kg = 0.0001% . (2) MDL = Method Detection Limit . (3) ND = Not Detected ( < MDL ) . (4) "-" = Not Regulated . RoHS Directive 2011/65/EU. Test Method : . (1) With reference to IEC 62321-5:2013, determination of Cadmium by ICP-OES. (2) With reference to IEC 62321-5:2013, determination of Lead by ICP-OES. (3) With reference to IEC 62321-4:2013, determination of Mercury by ICP-OES. (4) With reference to IEC 62321:2008, determination of Hexavalent Chromium by Colorimetric Method using UV-Vis. (5) With reference to IEC 62321:2008, determination of PBBs and PBDEs by GC-MS. . Limit. Unit. MDL. 015. Cadmium (Cd) . 100 mg/kg. 2 ND Lead (Pb). 1000 mg/kg. 2 ND Mercury (Hg). 1000 mg/kg. 2 ND Hexavalent Chromium (Cr(VI)) . 1000 mg/kg. 2 ND Sum of PBBs . 1000 mg/kg. - ND Monobromobiphenyl . - mg/kg. 5 ND Dibromobiphenyl . - mg/kg. 5 ND Tribromobiphenyl . - mg/kg. 5 ND Tetrabromobiphenyl . - mg/kg. 5 ND Pentabromobiphenyl . - mg/kg. 5 ND Hexabromobiphenyl . - mg/kg. 5 ND Heptabromobiphenyl . - mg/kg. 5 ND Octabromobiphenyl . - mg/kg. 5 ND Nonabromobiphenyl . - mg/kg. 5 ND Decabromobiphenyl . - mg/kg. 5 ND Test Item(s). Sum of PBDEs . Monobromodiphenyl ether . 1000 mg/kg. - ND - mg/kg. 5 ND Test Report. No. SHAEC1515770519 Date: 13 Aug 2015 . Limit. Unit. MDL. 015. Dibromodiphenyl ether . - mg/kg. 5 ND Tribromodiphenyl ether . - mg/kg. 5 ND Tetrabromodiphenyl ether . - mg/kg. 5 ND Pentabromodiphenyl ether . - mg/kg. 5 ND Hexabromodiphenyl ether . - mg/kg. 5 ND Heptabromodiphenyl ether . - mg/kg. 5 ND Octabromodiphenyl ether . - mg/kg. 5 ND Nonabromodiphenyl ether . - mg/kg. 5 ND Decabromodiphenyl ether . - mg/kg. 5 ND Test Item(s). Notes :. (1) The maximum permissible limit is quoted from the directive 2011/65/EU, Annex II (2) Result shown is of the total weight of wet sample. . Page 3 of 5. Test Report. No. SHAEC1515770519 Date: 13 Aug 2015 . Page 4 of 5. ATTACHMENTS RoHS Testing Flow Chart 1) Name of the person who made testing: Bob Zhang/Gary Xu/Zengzhen Zhu/Sunny Qin 2) Name of the person in charge of testing: Jan Shi/Summer Jin/Jessy Huang/Stone Chen 3) These samples were dissolved totally by pre-conditioning method according to below flow chart. 6+ (Cr and PBBs/PBDEs test method excluded) Sample Preparation Sample Measurement Pb/Cd/Hg Acid digestion with microwave/ hotplate Sample solvent extraction Filtration Concentration/ Dilution of extraction solution Solution + Cr6 PBBs/PBDEs Nonmetallic material Adding digestion reagent Residue GC/MS Heating to 90~95℃ for extraction Filtration and pH adjustment DATA ICP-OES/AAS DATA Positive Spot test Negative Filtration 1) Alkali Fusion / Dry Ashing 2) Acid to dissolve Metallic material Adding 1,5diphenylcarbazide for color development UV-Vis DATA Boiling water extraction Adding 1,5diphenylcarbazide for color development A red color indicates the 6+ presence of Cr . If necessary, confirm with UVVis. DATA Test Report. No. SHAEC1515770519 Date: 13 Aug 2015 . Sample photo: . SHAEC1515770519 SHA15-157705.015 . SGS authenticate the photo on original report only . *** End of Report *** . Page 5 of 5. Test Report Page 1 of 7 Report No. SCL01H013155001 Applicant Address DONGGUAN SUNWAY PRINTING INDUSTRY CO.,LTD YINLING INDUSTRIAL, XIAQIAO GUANLONG ROAD, DONGCHENG ZONE, DONGGUAN CITY, GUANGDONG PROVINCE, CHINA The following sample(s) and sample information was/were submitted and identified by/on the behalf of the client Sample Name 上光PP膜 Part No. Color Manufacturer OPAT Sample Received Date Testing Period Mar. 2, 2015 Mar. 2, 2015 to Mar. 4, 2015 Test Requested As specified by client, to test Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent Chromium(Cr(VI)), Polybrominated Biphenyl(PBBs) , Polybrominated Diphenyl Ethers(PBDEs), Fluorine(F), Chlorine(Cl), Bromine(Br), Iodine(I), Hexabromocyclododecane (HBCDD), Phthalates in the submitted sample(s). Test Method Please refer to the following page(s). Test Result(s) Please refer to the following page(s). 透明 FUZHOU Mar. 4, 2015 No. R148192600 Test Report Report No. Page 2 of 7 SCL01H013155001 Test Method Test Item(s) Test Method Measured Equipment(s) Lead (Pb) IEC 62321-5:2013 Ed.1.0 ICP-OES Cadmium (Cd) IEC 62321-5:2013 Ed.1.0 ICP-OES Mercury (Hg) IEC 62321-4:2013 Ed.1.0 ICP-OES Hexavalent Chromium(Cr(VI)) IEC 62321:2008 Ed.1 Annex C UV-Vis Polybrominated Biphenyl(PBBs) IEC 62321:2008 Ed.1 Annex A GC-MS Polybrominated Diphenyl Ethers(PBDEs) IEC 62321:2008 Ed.1 Annex A GC-MS Fluorine(F) Refer to BS EN 14582:2007 IC Chlorine(Cl) Refer to BS EN 14582:2007 IC Bromine(Br) Refer to BS EN 14582:2007 IC Iodine(I) Refer to BS EN 14582:2007 IC Hexabromocyclododecane (HBCDD) Refer to US EPA 3540C:1996 & US EPA 8270D:2007 GC-MS Phthalates Refer to EN 14372:2004(E) GC-MS Test Result(s) Tested Item(s) Lead (Pb) Result N.D. MDL 2 mg/kg Cadmium (Cd) N.D. 2 mg/kg Mercury (Hg) N.D. 2 mg/kg Hexavalent Chromium (Cr(VI)) N.D. 2 mg/kg Result MDL Monobromobiphenyl N.D. 5 mg/kg Dibromobiphenyl N.D. 5 mg/kg Tribromobiphenyl N.D. 5 mg/kg Tetrabromobiphenyl N.D. 5 mg/kg Pentabromobiphenyl N.D. 5 mg/kg Hexabromobiphenyl N.D. 5 mg/kg Heptabromobiphenyl N.D. 5 mg/kg Octabromobiphenyl N.D. 5 mg/kg Nonabromobiphenyl N.D. 5 mg/kg Decabromobiphenyl N.D. 5 mg/kg Tested Item(s) Polybrominated Biphenyl(PBBs) Test Report Report No. Page 3 of 7 SCL01H013155001 Tested Item(s) Polybrominated Diphenyl Ethers(PBDEs) Result MDL Monobromodiphenyl ether N.D. 5 mg/kg Dibromodiphenyl ether N.D. 5 mg/kg Tribromodiphenyl ether N.D. 5 mg/kg Tetrabromodiphenyl ether N.D. 5 mg/kg Pentabromodiphenyl ether N.D. 5 mg/kg Hexabromodiphenyl ether N.D. 5 mg/kg Heptabromodiphenyl ether N.D. 5 mg/kg Octabromodiphenyl ether N.D. 5 mg/kg Nonabromodiphenyl ether N.D. 5 mg/kg Decabromodiphenyl ether N.D. 5 mg/kg Result MDL Fluorine(F) N.D. 10 mg/kg Chlorine(Cl) N.D. 10 mg/kg Bromine(Br) N.D. 10 mg/kg Iodine(I) N.D. 10 mg/kg Result N.D. MDL 5 mg/kg Tested Item(s) Halogen(s) Tested Item(s) Hexabromocyclododecane (HBCDD) Test Report Report No. Page 4 of 7 SCL01H013155001 Tested Item(s) Result MDL N.D. 50 mg/kg N.D. 50 mg/kg N.D. 50 mg/kg N.D. 50 mg/kg Butylbenzyl phthalate(BBP) CAS#:85-68-7 N.D. 50 mg/kg Di-2-ethylhexyl phthalate(DEHP) CAS#:117-81-7 N.D. 50 mg/kg Di-n-octyl phthalate(DNOP) CAS#:117-84-0 N.D. 50 mg/kg Diisononyl phthalate(DINP) CAS#:28553-12-0,68515-48-0 N.D. 50 mg/kg Diisodecyl phthalate(DIDP) CAS#:26761-40-0,68515-49-1 N.D. 50 mg/kg Di-n-hexyl phthalate (DNHP) CAS#:84-75-3 N.D. 50 mg/kg Phthalates Dimethyl phthalate(DMP) CAS#:131-11-3 Diethyl phthalate(DEP) CAS#:84-66-2 Diisobutyl phthalate(DIBP) CAS#:84-69-5 Dibutyl phthalate(DBP) CAS#:84-74-2 Tested Sample/Part Description Remark: Transparent plastic film with adhesive paste The sample(s) had been dissolved totally tested for Lead, Cadmium, Mercury. -MDL = Method Detection Limit -N.D. = Not Detected (<MDL ) -mg/kg = ppm = parts per million Test Report Report No. SCL01H013155001 Test Process 1. Lead (Pb), Cadmium (Cd) 2. Mercury (Hg) 3. Hexavalent Chromium(Cr(VI)) 4. Phthalates Page 5 of 7 Test Report Report No. SCL01H013155001 5. Bromine(Br), Chlorine(Cl), Fluorine(F), Iodine(I) 6. Polybrominated Biphenyl(PBBs) , Polybrominated Diphenyl Ethers(PBDEs) 7. Hexabromocyclododecane (HBCDD) Page 6 of 7 Test Report Report No. Page 7 of 7 SCL01H013155001 Photo(s) of the sample(s) *** End of report *** The test report is effective only with both signature and specialized stamp. The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CTI, this report can’t be reproduced except in full. 測試報告 Test Report 號碼(No.) : CE/2015/53008 日期(Date) : 2015/05/20 喬越實業有限公司 SIL-MORE INDUSTRIAL LTD. 新北市三重區興德路100號16樓 16F, NO. 100, XINGDE RD., SANCHONG DISTRICT, NEW TAIPEI CITY 24158, TAIWAN 頁數(Page): 1 of 11 *CE/2015/53008* 以下測試樣品係由申請廠商所提供及確認 (The following sample(s) was/were submitted and identified by/on behalf of the applicant as)： 樣品名稱(Sample Description) : DOW CORNING TC-5630 THERMALLY CONDUCTIVE COMPOUND 收件日期(Sample Receiving Date) : 2015/05/14 測試期間(Testing Period) : 2015/05/14 TO 2015/05/20 =================================================================================================================== 測試需求(Test Requested)： (1) 依據客戶要求，參考RoHS 2011/65/EU Annex II 指令測試鎘、鉛、汞、六價鉻、多溴聯苯、多溴聯苯醚. (As specified by client, with reference to RoHS Directive 2011/65/EU Annex II to determine Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs contents in the submitted sample.) (2) 依據客戶要求，參考 WTO/TBT 通報 G/TBT/N/EU/256，檢測 DBP, BBP, DEHP, DIBP. (As specified by client, with reference to G/TBT/N/EU/256 of WTO/TBT to test DBP, BBP, DEHP, DIBP.) (3) 其他測試項目請見下一頁 . / Please refer to next pages for the other item(s). 測試結果(Test Results) ： 請見下一頁 (Please refer to next pages). This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 14 33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / 新北市新北產業園區五權路33號 t+886 (02)2299 3279 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group 測試報告 Test Report 號碼(No.) : CE/2015/53008 日期(Date) : 2015/05/20 頁數(Page): 2 of 11 喬越實業有限公司 SIL-MORE INDUSTRIAL LTD. 新北市三重區興德路100號16樓 16F, NO. 100, XINGDE RD., SANCHONG DISTRICT, NEW TAIPEI CITY 24158, TAIWAN *CE/2015/53008* 測試結果(Test Results) 測試部位(PART NAME)No.1 ： 灰色膏狀 (GRAY PASTE) 測試項目 (Test Items) 單位 (Unit) 測試方法 (Method) 鎘 / Cadmium (Cd) mg/kg 鉛 / Lead (Pb) mg/kg 汞 / Mercury (Hg) mg/kg 六價鉻 / Hexavalent Chromium Cr(VI) mg/kg 鄰苯二甲酸二異丁酯 / DIBP (Diisobutyl phthalate) (CAS No.: 84-695) mg/kg 參考IEC 62321-5: 2013方法, 以感應 耦合電漿原子發射光譜儀檢測. / With reference to IEC 62321-5: 2013 and performed by ICP-AES. 參考IEC 62321-5: 2013方法, 以感應 耦合電漿原子發射光譜儀檢測. / With reference to IEC 62321-5: 2013 and performed by ICP-AES. 參考IEC 62321-4: 2013方法, 以感應 耦合電漿原子發射光譜儀檢測. / With reference to IEC 62321-4: 2013 and performed by ICP-AES. 參考IEC 62321: 2008方法, 以UV-VIS 檢測. / With reference to IEC 62321: 2008 and performed by UVVIS. 參考IEC 62321-8 (111/321/CD)，以氣 相層析儀/質譜儀檢測之. / With reference to IEC 62321-8 (111/321/CD). Analysis was performed by GC/MS. 鄰苯二甲酸二丁酯 / DBP (Dibutyl phthalate) (CAS No.: 84-74-2) mg/kg 參考IEC 62321-8 (111/321/CD)，以氣 相層析儀/質譜儀檢測之. / With reference to IEC 62321-8 (111/321/CD). Analysis was performed by GC/MS. 方法偵測 極限值 (MDL) 結果 (Result) 2 No.1 n.d. 2 n.d. 2 n.d. 2 n.d. 50 n.d. 50 n.d. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 15 33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / 新北市新北產業園區五權路33號 t+886 (02)2299 3279 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group 測試報告 Test Report 號碼(No.) : CE/2015/53008 日期(Date) : 2015/05/20 頁數(Page): 3 of 11 喬越實業有限公司 SIL-MORE INDUSTRIAL LTD. 新北市三重區興德路100號16樓 16F, NO. 100, XINGDE RD., SANCHONG DISTRICT, NEW TAIPEI CITY 24158, TAIWAN *CE/2015/53008* 方法偵測 極限值 (MDL) 結果 (Result) 測試項目 (Test Items) 單位 (Unit) 測試方法 (Method) 鄰苯二甲酸丁苯甲酯 / BBP (Butyl Benzyl phthalate) (CAS No.: 85-68-7) mg/kg 參考IEC 62321-8 (111/321/CD)，以氣 相層析儀/質譜儀檢測之. / With reference to IEC 62321-8 (111/321/CD). Analysis was performed by GC/MS. 50 No.1 n.d. 鄰苯二甲酸二 (2-乙基己基)酯 / DEHP (Di- (2-ethylhexyl) phthalate) (CAS No.: 117-81-7) mg/kg 參考IEC 62321-8 (111/321/CD)，以氣 相層析儀/質譜儀檢測之. / With reference to IEC 62321-8 (111/321/CD). Analysis was performed by GC/MS. 50 n.d. 鄰苯二甲酸二正辛酯 / DNOP (Di-noctyl phthalate) (CAS No.: 117-84-0) mg/kg 參考IEC 62321-8 (111/321/CD)，以氣 相層析儀/質譜儀檢測之. / With reference to IEC 62321-8 (111/321/CD). Analysis was performed by GC/MS. 50 n.d. 鄰苯二甲酸二異壬酯 / DINP (Diisononyl phthalate) (CAS No.: 2855312-0; 68515-48-0) mg/kg 參考IEC 62321-8 (111/321/CD)，以氣 相層析儀/質譜儀檢測之. / With reference to IEC 62321-8 (111/321/CD). Analysis was performed by GC/MS. 50 n.d. 鄰苯二甲酸二異癸酯 / DIDP (Diisodecyl phthalate) (CAS No.: 2676140-0; 68515-49-1) mg/kg 參考IEC 62321-8 (111/321/CD)，以氣 相層析儀/質譜儀檢測之. / With reference to IEC 62321-8 (111/321/CD). Analysis was performed by GC/MS. 50 n.d. 鄰苯二甲酸二戊酯 / Di-n-pentyl phthalate (CAS No.: 131-18-0) mg/kg 參考IEC 62321-8 (111/321/CD)，以氣 相層析儀/質譜儀檢測之. / With reference to IEC 62321-8 (111/321/CD). Analysis was performed by GC/MS. 50 n.d. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 16 33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / 新北市新北產業園區五權路33號 t+886 (02)2299 3279 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group 測試報告 Test Report 號碼(No.) : CE/2015/53008 日期(Date) : 2015/05/20 頁數(Page): 4 of 11 喬越實業有限公司 SIL-MORE INDUSTRIAL LTD. 新北市三重區興德路100號16樓 16F, NO. 100, XINGDE RD., SANCHONG DISTRICT, NEW TAIPEI CITY 24158, TAIWAN 測試項目 (Test Items) 單位 (Unit) 測試方法 (Method) 六溴環十二烷及所有主要被辨別出的異構 物 / Hexabromocyclododecane (HBCDD) and all major diastereoisomers identified (α- HBCDD, β- HBCDD, γ- HBCDD) (CAS No.: 25637-99-4 and 3194-55-6 (134237-51-7, 134237-50-6, 134237-52-8)) mg/kg 參考IEC 62321: 2008方法, 以氣相層 析/質譜儀檢測. / With reference to IEC 62321: 2008 method. Analysis was performed by GC/MS. 多溴聯苯總和 / Sum of PBBs mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg 一溴聯苯 / Monobromobiphenyl 二溴聯苯 / Dibromobiphenyl 三溴聯苯 / Tribromobiphenyl 四溴聯苯 / Tetrabromobiphenyl 五溴聯苯 / Pentabromobiphenyl 六溴聯苯 / Hexabromobiphenyl 七溴聯苯 / Heptabromobiphenyl 八溴聯苯 / Octabromobiphenyl 九溴聯苯 / Nonabromobiphenyl 十溴聯苯 / Decabromobiphenyl 多溴聯苯醚總和 / Sum of PBDEs 一溴聯苯醚 / Monobromodiphenyl ether 二溴聯苯醚 / Dibromodiphenyl ether 三溴聯苯醚 / Tribromodiphenyl ether 四溴聯苯醚 / Tetrabromodiphenyl ether 五溴聯苯醚 / Pentabromodiphenyl ether 六溴聯苯醚 / Hexabromodiphenyl ether 七溴聯苯醚 / Heptabromodiphenyl ether 八溴聯苯醚 / Octabromodiphenyl ether 九溴聯苯醚 / Nonabromodiphenyl ether 十溴聯苯醚 / Decabromodiphenyl ether 參考IEC 62321: 2008方法, 以氣相層 析/質譜儀檢測. / With reference to IEC 62321: 2008 and performed by GC/MS. *CE/2015/53008* 方法偵測 極限值 (MDL) 結果 (Result) 5 No.1 n.d. 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 17 33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / 新北市新北產業園區五權路33號 t+886 (02)2299 3279 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group 測試報告 Test Report 號碼(No.) : CE/2015/53008 日期(Date) : 2015/05/20 頁數(Page): 5 of 11 喬越實業有限公司 SIL-MORE INDUSTRIAL LTD. 新北市三重區興德路100號16樓 16F, NO. 100, XINGDE RD., SANCHONG DISTRICT, NEW TAIPEI CITY 24158, TAIWAN 測試項目 (Test Items) 單位 (Unit) 測試方法 (Method) *CE/2015/53008* 方法偵測 極限值 (MDL) 結果 (Result) 50 n.d. 50 n.d. 50 n.d. 50 n.d. No.1 鹵素 / Halogen 鹵素 (氟) / Halogen-Fluorine (F) (CAS No.: 14762-94-8) mg/kg 鹵素 (氯) / Halogen-Chlorine (Cl) (CAS No.: 22537-15-1) mg/kg 鹵素 (溴) / Halogen-Bromine (Br) (CAS No.: 10097-32-2) mg/kg 鹵素 (碘) / Halogen-Iodine (I) (CAS No.: 14362-44-8) mg/kg 參考BS EN 14582:2007, 以離子層析儀 分析. / With reference to BS EN 14582:2007. Analysis was performed by IC. 備註(Note)： 1. mg/kg = ppm；0.1wt% = 1000ppm 2. n.d. = Not Detected (未檢出) 3. MDL = Method Detection Limit (方法偵測極限值) 4. "-" = Not Regulated (無規格值) This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 18 33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / 新北市新北產業園區五權路33號 t+886 (02)2299 3279 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group 測試報告 Test Report 號碼(No.) : CE/2015/53008 日期(Date) : 2015/05/20 喬越實業有限公司 SIL-MORE INDUSTRIAL LTD. 新北市三重區興德路100號16樓 16F, NO. 100, XINGDE RD., SANCHONG DISTRICT, NEW TAIPEI CITY 24158, TAIWAN 頁數(Page): 6 of 11 *CE/2015/53008* #flow 1) 2) 3) 根據以下的流程圖之條件，樣品已完全溶解。（六價鉻測試方法除外） / These samples were 6+ dissolved totally by pre-conditioning method according to below flow chart. （Cr test method excluded） 測試人員：楊登偉 / Name of the person who made measurement: Climbgreat Yang 測試負責人：張啟興 / Name of the person in charge of measurement: Troy Chang 剪裁、製備樣品 / Cutting、Preparation 測試樣品重量 / Sample Measurement 鉛 Pb、鎘 Cd 汞 Hg 依據不同樣品的材質而以適當的酸進行消化(如下表 所示) / Acid digestion by suitable acid depended on different sample material (as below table) 硝酸/鹽酸/氫氟酸的微波消化 / Microwave digestion with HNO 3/HCl/HF 過濾 / Filtration 殘渣 / Residue 溶液 / Solution 1) 2) 鹼熔融法 / Alkali Fusion 鹽酸溶解 / HCl to dissolve 六價鉻 Cr6+ (Note**) 添加適量消化液 / Add appropriate amount of digestion reagent 加熱至適當溫度進行消化萃 取 / Heat to appropriate temperature to extract 冷卻後過濾樣品 / Cool, filter digestate through filter 感應耦合電漿原子發射光譜儀 / ICP-AES 樣品材質 / Sample Material 鋼, 銅, 鋁, 焊錫 / Steel, copper, aluminum, solder 玻璃 / Glass 金, 鉑, 鈀, 陶瓷 / Gold, platinum, palladium, ceramic 銀 / Silver 塑膠 / Plastic 其他 / Others 消化酸液種類 / Digestion Acid 王水, 硝酸, 鹽酸, 氫氟酸, 雙氧水 / Aqua regia, HNO3, HCl, HF, H2O2 硝酸,氫氟酸 / HNO3/HF 王水 / Aqua regia 硝酸 / HNO3 硫酸, 雙氧水, 硝酸, 鹽酸 / H2SO4, H2O2, HNO3, HCl 加入適當的試劑至完全溶解 / Added appropriate reagent to total digestion 加入發色劑顯色 / Add diphenyl-carbazide for color development 以紫外光-可見光光譜儀，量 測樣品溶液在 540 nm 的吸 收度 / measure the absorbance at 540 nm by UV-VIS Note** (For IEC 62321) (1) 針對非金屬材料加入鹼性消化液，加熱至 90~95℃萃取. / For non-metallic material, add alkaline digestion reagent and heat to 90~95℃. (2) 針對金屬材料加入純水，加熱至沸騰萃取. / For metallic material, add pure water and heat to boiling. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 19 33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / 新北市新北產業園區五權路33號 t+886 (02)2299 3279 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group 測試報告 Test Report 號碼(No.) : CE/2015/53008 日期(Date) : 2015/05/20 頁數(Page): 7 of 11 喬越實業有限公司 SIL-MORE INDUSTRIAL LTD. 新北市三重區興德路100號16樓 16F, NO. 100, XINGDE RD., SANCHONG DISTRICT, NEW TAIPEI CITY 24158, TAIWAN *CE/2015/53008* 鹵素分析流程圖 / Analytical flow chart of halogen content 測試人員：陳恩臻 / Name of the person who made measurement: Rita Chen 測試負責人：張啟興 / Name of the person in charge of measurement: Troy Chang 樣品前處理/分樣 / Sample pretreatment/separation 秤重及將樣品放入樣品槽中 / Weighting and putting sample in cell 燃燒彈/吸收 Oxygen Bomb Combustion / Absorption 稀釋至固定體積 / Dilution to fixed volume 離子層析儀分析 / Analysis was performed by IC This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 20 33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / 新北市新北產業園區五權路33號 t+886 (02)2299 3279 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group 測試報告 Test Report 號碼(No.) : CE/2015/53008 日期(Date) : 2015/05/20 喬越實業有限公司 SIL-MORE INDUSTRIAL LTD. 新北市三重區興德路100號16樓 16F, NO. 100, XINGDE RD., SANCHONG DISTRICT, NEW TAIPEI CITY 24158, TAIWAN 頁數(Page): 8 of 11 *CE/2015/53008* 六溴環十二烷分析流程圖 / HBCDD analytical flow chart 測試人員：翁賜彬 / Name of the person who made measurement: Roman Wong 測試負責人：張啟興 / Name of the person in charge of measurement: Troy Chang 樣品前處理 / Sample pretreatment 樣品萃取 Sample extraction / 超音波萃取法 Ultrasonic method 萃取液濃縮/稀釋 / Concentrate/Dilute Extracted solution 萃取液過濾 / Filter 以氣相層析/質譜儀分析 / Analysis was performed by GC/MS 數據 / Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 21 33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / 新北市新北產業園區五權路33號 t+886 (02)2299 3279 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group 測試報告 Test Report 號碼(No.) : CE/2015/53008 日期(Date) : 2015/05/20 頁數(Page): 9 of 11 喬越實業有限公司 SIL-MORE INDUSTRIAL LTD. 新北市三重區興德路100號16樓 16F, NO. 100, XINGDE RD., SANCHONG DISTRICT, NEW TAIPEI CITY 24158, TAIWAN *CE/2015/53008* 可塑劑分析流程圖 / Analytical flow chart of phthalate content 測試人員：徐毓明 / Name of the person who made measurement: Andy Shu 測試負責人：張啟興 / Name of the person in charge of measurement: Troy Chang 【測試方法/Test method: IEC 62321-8】 樣品前處理/分樣 / Sample pretreatment/separation 樣品以 THF 四氫呋喃溶解萃取 / Sample dissolved/extracted by THF 萃取液稀釋 / Dilute Extracted solution 氣相層析質譜儀分析 / Analysis was performed by GC/MS 數據 / Data This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 22 33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / 新北市新北產業園區五權路33號 t+886 (02)2299 3279 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group 測試報告 Test Report 號碼(No.) : CE/2015/53008 日期(Date) : 2015/05/20 頁數(Page): 10 of 11 喬越實業有限公司 SIL-MORE INDUSTRIAL LTD. 新北市三重區興德路100號16樓 16F, NO. 100, XINGDE RD., SANCHONG DISTRICT, NEW TAIPEI CITY 24158, TAIWAN *CE/2015/53008* 多溴聯苯/多溴聯苯醚分析流程圖 / PBB/PBDE analytical FLOW CHART 測試人員：翁賜彬 / Name of the person who made measurement: Roman Wong 測試負責人：張啟興 / Name of the person in charge of measurement: Troy Chang 初次測試程序 / First testing process 選擇性篩檢程序 / Optional screen process 確認程序 / Confirmation process Sample / 樣品 Sample pretreatment / 樣品前處理 Screen analysis / 初篩分析 Sample extraction 樣品萃取/ Soxhlet method 索式萃取法 Concentrate/Dilute Extracted solution 萃取液濃縮/稀釋 Filter / 萃取液過濾 Analysis by GC/MS / 氣相層析質譜儀分析 Issue Report 撰打報告 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 23 33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / 新北市新北產業園區五權路33號 t+886 (02)2299 3279 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group 測試報告 Test Report 號碼(No.) : CE/2015/53008 日期(Date) : 2015/05/20 喬越實業有限公司 SIL-MORE INDUSTRIAL LTD. 新北市三重區興德路100號16樓 16F, NO. 100, XINGDE RD., SANCHONG DISTRICT, NEW TAIPEI CITY 24158, TAIWAN #PIC 頁數(Page): 11 of 11 *CE/2015/53008* * 照片中如有箭頭標示，則表示為實際檢測之樣品/部位. * (The tested sample / part is marked by an arrow if it's shown on the photo.) ** 報告結尾 (End of Report) ** This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 24 33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / 新北市新北產業園區五權路33號 t+886 (02)2299 3279 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group