CIT J104D2C12VDC.15S High sensitivity Datasheet

J104D
RoHS Compliant
E197851
20.4 x 10.05 x 11.0 mm
Features
•
•
•
•
•
•
High sensitivity
Low cost
Conforms to FCC part 68
Clearance more than 1.2mm between coil and contacts
Creepage more than 1.9mm between coil and contacts
Bifurcated contacts for high reliability
Contact Data*
Contact Arrangement
2C = DPDT Bifurcated Contacts
Maximum Switching Power
48W, 120VA
Contact Rating
2A @ 24VDC, Resistive
Maximum Switching Voltage
250VAC, 100VDC
1A @ 120VAC, Resistive
Maximum Switching Current
2A
Contact Material
AgNi + Au Clad
Contact Resistance
≤ 50 milliohms initial
Coil Data*
Coil Voltage
VDC
Rated
Coil Resistance
Ω +/- 10%
Max
.15W
.20W
.36W
Pick Up Voltage Release Voltage
VDC (max)
VDC (min)
75% of rated
voltage
.45W
Coil Power
W
Operate Time
ms
Release Time
ms
.15
.20
.36
.45
6
4
10% of rated
voltage
3
3.9
60
45
25
20
2.25
0.3
5
6.5
167
125
70
56
3.75
0.5
6
7.8
240
180
100
80
4.50
0.6
9
11.7
540
405
225
180
6.75
0.9
12
15.6
960
720
400
320
9.00
1.2
24
31.2
3840
2880
1600
1280
18.00
2.4
48
62.4
n/a
11520
6400
5100
36.00
4.8
General Data*
Electrical Life @ rated load
100K cycles, average
Mechanical Life
10M cycles, average
Insulation Resistance
100M Ω min. @ 500VDC initial
Dielectric Strength, Coil to Contact
1000V rms min. @ sea level initial
Contact to Contact
*
Values can change due to the switching frequency, desired
reliability levels, environmental conditions and in-rush load levels.
It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance
suitability for their specific application. The use of any coil voltage
less than the rated coil voltage may compromise the operation
of the relay.
500V rms min. @ sea level initial
Shock Resistance
100m/s2 for 11 ms
Vibration Resistance
1.5mm double amplitude 10~40Hz
Terminal (Copper Alloy) Strength
5N
Operating Temperature
-40oC to +85oC
Storage Temperature
-40oC to +85oC
Solderability
260oC for 5 s
Weight
5g
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
page 1
Specifications and availability subject to change without notice.
J104D
Ordering Information
1. Series
J104D
2C
12VDC
.45
S
J104D
2. Contact Arrangement
2C = DPDT
3. Coil Voltage
3VDC
5VDC
6VDC
9VDC
12VDC
24VDC
48VDC **Not available with .15W coil power
4. Coil Power
.15 = .15W
.20 = .20W
.36 = .36W
.45 = .45W
5. Seal
S = Sealed (standard)
Dimensions
Schematic & PC Layout
Units = mm
Bottom View
20.37
[.80]
9.97
[.39]
11.10
[.44]
11.42
[.45]
7.62
[.30]
5.08
[.20]
Ø1.00 TYP
[.04]
7.62
[.30]
page 2
1.30
[.05]
5.08
[.20]
7.62
[.30]
5.08
[.20] 1.18
[.05]
www.citrelay.com
3.58 TYP
[.14]
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
7.62
[.30]
5.08
[.20]
fax - 763.535.2194
Specifications and availability subject to change without notice.
Similar pages