Document 554-1 Shielded Power Inductors – LPS6225 • Low DCR; high current; shielded construction • Perfect for backlight applications Designer’s Kit C349 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 309 – 331 mg Ambient temperature –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.57 mm pocket depth Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Isat (A)5 Irms (A)6 DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20°C 40°C Part number1 ± 20% (µH) (Ohms) (MHz) drop drop drop rise rise LPS6225-122MR_ LPS6225-222MR_ LPS6225-332MR_ LPS6225-472MR_ LPS6225-682MR_ 1.2 2.2 3.3 4.7 6.8 0.040 178 0.045 100 0.055 68 0.065 53 0.095 40 5.3 3.9 3.5 3.0 2.6 5.4 4.0 3.5 3.1 2.7 5.4 4.1 3.6 3.2 2.8 1.1 1.0 1.0 0.90 0.90 1.65 1.40 1.35 1.30 1.30 2.1 2.1 1.4 1.1 0.98 2.1 2.2 1.5 1.2 1.0 2.2 2.2 1.6 1.2 1.0 0.90 0.85 0.80 0.65 0.60 1.30 1.20 1.10 0.90 0.80 LPS6225-103MR_ LPS6225-153MR_ LPS6225-223MR_ LPS6225-333MR_ LPS6225-473MR_ 10 15 22 33 47 0.105 0.135 0.175 0.260 0.360 35 23 17 14 10 LPS6225-683MR_ LPS6225-104MR_ LPS6225-124MR_ LPS6225-154MR_ LPS6225-224MR_ 68 100 120 150 220 0.420 0.610 0.750 0.920 1.30 9.6 7.7 7.4 6.4 5.0 0.58 0.48 0.42 0.39 0.32 0.61 0.51 0.45 0.41 0.34 0.62 0.52 0.46 0.42 0.35 0.57 0.47 0.43 0.40 0.37 0.74 0.64 0.58 0.54 0.50 LPS6225-334MR_ LPS6225-474MR_ LPS6225-684MR_ LPS6225-105MR_ LPS6225-155MR_ 330 470 680 1000 1500 2.00 2.60 4.00 6.00 9.00 3.8 3.2 2.8 2.3 1.8 0.26 0.22 0.18 0.15 0.12 0.27 0.23 0.19 0.16 0.13 0.28 0.24 0.20 0.17 0.13 0.28 0.24 0.18 0.15 0.13 0.39 0.37 0.26 0.24 0.20 LPS6225-185MR_ LPS6225-225MR_ LPS6225-335MR_ LPS6225-475MR_ LPS6225-565MR_ 1800 2200 3300 4700 5600 11.7 13.5 21.0 30.0 36.0 1.7 1.3 1.1 0.90 0.72 0.11 0.10 0.099 0.086 0.083 0.12 0.10 0.10 0.096 0.090 0.12 0.11 0.11 0.10 0.096 0.11 0.11 0.080 0.075 0.070 0.14 0.13 0.11 0.090 0.090 LPS6225-685MR_ 6800 LPS6225-825MR_ 8200 LPS6225-106MR_ 10000 43.0 54.0 70.0 0.70 0.080 0.086 0.089 0.065 0.080 0.69 0.079 0.086 0.088 0.060 0.075 0.68 0.075 0.084 0.087 0.060 0.065 1. Please specify termination and packaging codes: LPS6225-106MRC Termination: R = RoHS compliant matte tin over nickel over silver. Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 554-1 Revised 09/02/15 Document 554-2 Shielded SMT Power Inductors – LPS6225 Series Typical L vs Frequency Typical L vs Current 10000 10000 3300 µH 1000 µH 330 µH 100 µH 100 33 µH 10 µH 10 1 0.01 0.1 Current (A) 1 10 0.236 ±0.003* 6,00 ±0,076 XXX X 330 µH 100 µH 100 33 µH 10 µH 10 1 0.01 1 0.1 10 Frequency (MHz) Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.57 mm pocket depth NOTE NEW PART ORIENTATION Parts are rotated 90° in the packaging tape compared to previous versions of this product. 0.236 ±0.003 * 6,00 ±0,076 Winding direction NEW 0.094 ±0.004* 2,40 ± 0,10 OLD 123 Internal code 123 123 Dash number 1000 µH 1000 Inductance (µH) 1000 Inductance (µH) 3300 µH 123 123 123 Recommended Land Pattern 0.079 2,00 0.165 4,20 0.039 typ 1,00 0.260 0.167 6,60 4,25 0.039 typ 1,00 are of the case not including * Dimensions the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch / 0,13 mm). 0.165 4,20 0.071 1,80 0.079 2,00 0.167 4,25 0.260 6,60 Dimensions are in inches mm Document 554-2 Revised 09/02/15