UTC LMH358G-S08-R Low power dual operational amplifier Datasheet

UNISONIC TECHNOLOGIES CO., LTD
LMH358
Preliminary
LINEAR INTEGRATED CIRCUIT
LOW POWER DUAL
OPERATIONAL AMPLIFIERS

DESCRIPTION
The UTC LMH358 is low noise, high voltage, and high slew rate
operational amplifier.This circuit consists of two independent, high
gain, internally frequency compensated operational amplifiers.
The input common mode range of the UTC LMH358 can be
beyond the rails. The UTC LMH358 are with rail-to-rails output
voltage swing. The quiescent current is 500µA per amplifier.
The UTC LMH358 also feature fast slewing and settle-times, as
well as high output drive capability of 60mA (source/sink).
These features make these amplifiers ideal for use as reference
buffers for TFT-LCD. Other applications include battery power,
portable devices, and anywhere low power consumption is
important.

SOP-8
FEATURES
* Operates on 4.5V~16V supplies
* Input common voltage range beyond the rails
* Rail-to-Rail output voltage swing
* Low input offset voltage 3mV (Typical)
* High gain-bandwidth product 4MHz
* Low quiescent current: 500µA per amplifier
* Large DC voltage gain 100dB (Typical)
* High slew rate 1.3V/µs
* Unit-Gain stable

ORDERING INFORMATION
Ordering Number
Lead Free
LMH358L-S08-R

Halogen Free
LMH358G-S08-R
Package
Packing
SOP-8
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 4
QW-R105-048.b
LMH358

Preliminary
PIN CONFIGURATION
VOUTA 1

8 VCC
VINA- 2
7 VOUTB
VINA+ 3
6 VINB-
VSS 4
5 VINB+
PIN DESCRIPTION
PIN NO.
1
2
3
4
5
6
7
8

LINEAR INTEGRATED CIRCUIT
PIN NAME
VOUTA
VINAVINA+
VSS
VINB+
VINBVOUTB
VCC
DESCRIPTION
Output of channel A
Inverting input of channel A
Non-Inverting input of channel A
Ground
Non-Inverting input of channel B
Inverting input of channel B
Output of channel B
Supply voltage
BLOCK DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 4
QW-R105-048.b
LMH358

Preliminary
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
RATINGS
UNIT
Supply Voltage
VCC
18
V
Input Voltage IN+, IN-0.3~VCC+0.3
V
Continuous Power Dissipation (TA=+25°C)
PD
0.7
W
Operating Ambient Temperature Range
TA
-40~+85
°C
Junction Temperature
TJ
150
°C
Storage Temperature
TSTG
-65~+150
°C
Reflow Temperature (Soldering, 10sec)
TR
260
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL CHARACTERISTICS
PARAMETER
Junction to Ambient

SYMBOL
θJA
RATINGS
170
UNIT
°C/W
ELECTRICAL CHARACTERISTICS
(TA=25°C; VCC=5V; VSS=-5V; CL=10pF, RL=10kΩ to 0V; unless otherwise specified.)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
Supplies
Supply Voltage Range (Note)
VCC-VSS
4.5
Supply Current
ICC1
VO=0V No Load (Per Amplifier)
DC Characteristics
Input Offset Voltage
VIO
Common Mode Voltage
VCM
Inferred from CMRR Test
VSS-0.5
Input Bias Current
IB
VCM=0
Input Impendence
Open Loop Gain
AV
VO=-4.5V~+4.5V
80
Output Voltage Swing High
VOH
4.85
Output Voltage Swing Low
VOL
Short Circuit Current
ISC
Output Current
IO
Power Supply Rejection Ratio
PSRR
5V≤VCC≤16V
60
Common-Mode Rejection Ratio
CMRR VSS≤VCM≤VCC
50
Channel Separation
CS
f=100KHz
Slew Rate
SR
-4V~+4V 10%~90%
Settle Time (to 0.1% AV=1)
VO=2V Step
Bandwidth
RL=10KΩ CL=10pF
Phase Margin
Note: Guaranteed by the Power-Supply Rejection Ratio (PSRR) test.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TYP
MAX
UNIT
0.5
16
0.75
V
mA
10
VCC+0.5
50
mV
V
nA
GΩ
dB
V
V
mA
mA
dB
dB
dB
V/µS
nS
MHz
degree
3
2
1
105
4.92
-4.92
±160
±50
85
80
75
1.3
450
4
50
-4.85
3 of 4
QW-R105-048.b
LMH358
Preliminary
LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R105-048.b
Similar pages