IHLP-1616AB-A1 www.vishay.com Vishay Dale Low Profile, High Current IHLP® Inductors FEATURES • Shielded construction • Lowest DCR/μH, in this package size • Handles high transient current spikes without saturation • Ultra low buzz noise, due to composite construction • Excellent DC/DC energy storage up to 5 MHz. Filter inductor applications up to SRF (see “Standard Electrical Specifications” table) • AEC-Q200 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Manufactured under one or more of the following: US Patents; 6,198,375/6,204,744/6,449,829/6,460,244. Several foreign patents, and other patents pending. APPLICATIONS STANDARD ELECTRICAL SPECIFICATIONS L0 INDUCTANCE ± 20 % AT 100 kHz, 0.25 V, 0 A (μH) DCR TYP. 25 °C (m) 0.047 3.25 3.75 13.0 32.0 565 0.10 5.50 6.00 11.5 25.0 277 0.22 11.0 12.0 8.5 20.0 183 0.47 20.0 22.0 5.0 13.0 101 0.68 29.3 31.4 4.9 9.3 100 1.0 50.0 52.5 4.0 7.0 64 • • • • Engine and transmission control units Diesel injection drivers DC/DC converters for entertainment/navigation systems Noise suppression for motors - Windshield wipers - Power seats - Power mirrors - Heating and ventilation blowers - HID lighting • LED drivers HEAT DCR RATING SATURATION MAX. CURRENT CURRENT SRF TYP. 25 °C DC TYP. DC TYP. (MHz) (A) (3) (m) (A) (4) DIMENSIONS in inches [millimeters] 0.160 ± 0.010 [4.06 ± 0.254] Notes (1) All test data is referenced to 25 °C ambient (2) Operating temperature range -55 °C to +125 °C (3) DC current (A) that will cause an approximate T of 40 °C (4) DC current (A) that will cause L to drop approximately 20 % 0 (5) The part temperature (ambient + temp. rise) should not exceed 125 °C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 0.160 ± 0.010 [4.06 ± 0.254] 0.080 ± 0.002 [2.0 ± 0.05] Typical Pad Layout 0.222 [5.639] 0.175 ± 0.010 [4.45 ± 0.254] 0.090 [2.286] 0.047 [1.20] Max. 0.076 [1.930] 0.030 ± 0.012 [0.76 ± 0.30] DESCRIPTION IHLP-1616AB-A1 MODEL 0.47 μH ± 20 % INDUCTANCE VALUE ER INDUCTANCE TOLERANCE e3 PACKAGE CODE JEDEC® LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I H L PRODUCT FAMILY Revision: 15-Sep-16 P 1 6 1 6 SIZE A B E R PACKAGE CODE R 4 INDUCTANCE VALUE 7 M TOL. A 1 SERIES Document Number: 34235 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IHLP-1616AB-A1 www.vishay.com Vishay Dale PERFORMANCE GRAPHS IHLP1616AB-A1 0.047 µH IHLP-1616AB-A1 0.10 µH 100 0.075 100 0.10 80 0.045 60 L 0.030 40 0.015 20 0.000 0 5 10 15 20 25 30 0.08 L 0.06 60 0.04 40 0.02 20 0.00 0 80 TEMPERATURE (°C) 0.060 INDUCTANCE (µH) ΔT °C TEMPERATURE (°C) INDUCTANCE (µH) ΔT °C 0 5 10 15 20 25 30 0 DC CURRENT (A) DC CURRENT (A) IHLP1616AB-A1 0.22 µH IHLP1616AB-A1 0.47 µH 0.5 100 0.20 100 0.12 60 0.08 40 0.04 20 2 4 6 8 10 12 14 16 18 20 80 L 0.3 0.2 40 0.1 20 0.0 0 22 0 1 2 3 4 5 6 IHLP-1616AB -A1 0.68 µH 8 0 9 10 11 12 13 14 15 16 17 ΔT °C IHLP1616AB-A1 1.0 µH 1.0 100 100 0.8 80 L 0.6 60 0.4 40 0.2 20 INDUCTANCE (μH) L TEMPERATURE (°C) INDUCTANCE (μH) 7 DC CURRENT (A) DC CURRENT (A) 1.0 60 80 0.8 0.6 60 ΔT °C 0.4 40 0.2 20 0 0.0 0.0 0 2 4 DC CURRENT (A) Revision: 15-Sep-16 6 8 0 TEMPERATURE (°C) 0.00 0 0.4 TEMPERATURE (°C) 80 L ΔT °C INDUCTANCE (µH) 0.16 TEMPERATURE (°C) INDUCTANCE (µH) ΔT °C 0 1 2 3 4 5 6 7 DC CURRENT (A) Document Number: 34235 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IHLP-1616AB-A1 www.vishay.com Vishay Dale PERFORMANCE GRAPHS: INDUCTANCE AND Q VS. FREQUENCY IHLP-1616AB-A1 0.047 μH 20 % IHLP-1616AB-A1 0.10 μH 20 % 50 0.10 0.120 50 30 0.06 L 0.04 20 0.02 10 0.00 0.1 1 0 1000 100 10 40 0.096 30 0.072 Q Q Q INDUCTANCE (μH) 40 0.08 Q 0.048 20 0.024 10 0.000 0.1 1 FREQUENCY (MHz) FREQUENCY (MHz) IHLP-1616AB-A1 0.22 μH 20 % IHLP-1616AB-A1 0.47 μH 20 % 0.30 100 1.0 50 0.24 80 0.8 40 0.6 30 0.4 20 0.2 10 L 0.12 40 0.06 20 0.00 0.1 1 100 10 0 1000 0.0 0.1 FREQUENCY (MHz) IHLP-1616AB-A1 0.68 µH 40 L Q 30 0.8 20 0.4 10 10 100 FREQUENCY (MHz) Revision: 15-Sep-16 0 1000 INDUCTANCE (μH) Q 1 0 1000 100 10 IHLP1616AB-A1 1.0 µH 5 50 1.6 0 0.1 1 FREQUENCY (MHz) 2 1.2 L Q 60 0.18 INDUCTANCE (μH) Q Q INDUCTANCE (μH) Q INDUCTANCE (μH) 0 1000 100 10 50 4 40 Q 3 30 Q INDUCTANCE (μH) L L 2 20 1 10 0 0 0.1 1 10 100 FREQUENCY (MHz) Document Number: 34235 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000