HP HDSP-713E-GF000 17.3 mm (0.68 inch) general purpose 5 x 7 dot matrix Datasheet

17.3 mm (0.68 inch) General
Purpose 5 x 7 Dot Matrix
Alphanumeric Displays
Technical Data
Features
Applications
•
•
•
•
• Suitable for Indoor Use
• Not Recommended for
Industrial Applications, i.e.
Operating Temperatures
Requirements Exceeding
85°C or Below -35°C[1]
• Extreme Temperature
Cycling Not Recommended[2]
•
•
•
•
•
5 x 7 Dot Matrix Font
Viewable up to 12 Meters
X-Y Stackable
Industry Standard Pin-out
7.6 mm (0.3 in.) Dual-in-line
(DIP) Leads on 2.54 mm
(0.1 in.) Centers
Choice of Colors
Red or Green or AlGaAs
Choice of Face Paint Colors
Gray or Black
Design Flexibility
Common Row Anode or
Common Row Cathode
Categorized for Luminous
Intensity
Green Categorized for Color
Description
These displays have a 17.3 mm
(0.68 inch) character height
and use industry standard size
and pin-out. The devices are
available in either common row
anode or common row cathode
configurations. The displays
come in either gray or black
face paint and are available in
a choice of high efficiency red
(HER) or green colors or AlGaAs.
HDSP-70xE Series
HDSP-71xE Series
HDSP-70xG Series
HDSP-71xG Series
HDSP-70xA Series
HDSP-71xA Series
These parts are subjected to
Outgoing Quality Assurance
(OQA) inspection with an AQL of
0.065% for functional and visual/
cosmetic defects.
For optimal intensity
performance, please consider our
industrial grade displays:
• HDSP-L20x
• HDSP-540x
• HDSP-L10x
Devices
HER HDSP701E
703E
711E
713E
Green HDSP701G
703G
711G
713G
AlGaAs HDSP701A
703A
711A
713A
Description
17.3 mm Gray Surface Common Row Anode
17.3 mm Gray Surface Common Row Cathode
17.3 mm Black Surface Common Row Anode
17.3 mm Black Surface Common Row Cathode
Notes:
1. For details, please contact your local Agilent components sales office or an authorized distributor.
2
Package Dimensions
12.7 (0.50)
MAX.
6.3
(0.25)
10.16 (0.40)
1.3 (0.05)
PIN 1
2.54 (0.10)
2.54
(0.10)
17.78
MAX.
(0.70)
12.7 (0.50)
15.24 (0.600)
2.54
(0.10)
PIN 6
35 – ∅ 1.9 (0.075)
PART NO.
COL 1
2
3
4
5
ROW 1
8 – 21.8°
2
8 – 3 (0.118)
8 – 2.5 (0.098)
3
4
5.1 ± 0.5 (0.201)
12 – ∅ 0.5 (0.02)
5
6
7.62 (0.03)
7
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. UNLESS OTHERWISE STATED, TOLERANCE IS ± 0.25 mm (0.010).
3. FOR GREEN ONLY.
Internal Circuit Diagram
COMMON ANODE ROW
COMMON CATHODE ROW
COLUMN
COLUMN
1
2
3
4
5
1
2
3
4
5
1
3
10
7
8
4
3
7
9
12
ROW
ROW
1 12
1 1
2 11
2 2
3 2
3 11
4 9
4 10
5 4
5 8
6 5
6 5
7 6
7 6
x = ROW OR COLUMN NUMBER, x = PIN NUMBER
COMMON ROW ANODE
HDSP-701E/711E/
701G/711G/701A/711A
PIN
COMMON ROW CATHODE
HDSP-703E/713E/
703G/713G/703A/713A
PIN
1
2
3
COLUMN 1 CATHODE
ROW 3 ANODE
COLUMN 2 CATHODE
1
2
3
ROW 1 CATHODE
ROW 2 CATHODE
COLUMN 2 ANODE
4
ROW 5 ANODE
4
COLUMN 1 ANODE
5
6
7
ROW 6 ANODE
ROW 7 ANODE
COLUMN 4 CATHODE
5
6
7
ROW 6 CATHODE
ROW 7 CATHODE
COLUMN 3 ANODE
8
9
COLUMN 5 CATHODE
ROW 4 ANODE
8
9
ROW 5 CATHODE
COLUMN 4 ANODE
10
11
12
COLUMN 3 CATHODE
ROW 2 ANODE
ROW 1 ANODE
10
11
12
ROW 4 CATHODE
ROW 3 CATHODE
COLUMN 5 ANODE
3
Absolute Maximum Ratings at TA = 25°C
Parameter
Average Power per Dot[1]
Peak Forward Current per Dot[1,2]
(1/10 Duty Cycle, 0.1 ms Pulse Width)
Average Forward Current per Dot[1]
Reverse Voltage per Dot
Operating Temperature
Storage Temperature
Wave Soldering Temperature for 3 seconds[3]
(1.6 mm [0.063 in.] below Body)
HER
HDSP-701E/
711E/703E/
713E
75
90
AlGaAs
HDSP-701A/
703A/711A/
713A
75
125
Green
HDSP-701G/
711G/703G/
713G
75
90
Units
mW
mA
23
5
–40 to +85
–40 to +85
250
23[3]
5
–40 to +85
–40 to +85
250
15[2]
5
–40 to +85
–40 to + 85
250
mA
V
°C
°C
°C
Notes:
1. Do not exceed maximum average current per dot.
2. Derate above 35°C at 0.2 mA/°C.
3. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not
to exceed 5 seconds.
Optical/Electrical Characteristics at TA = 25°C
High Efficiency Red
Devices
HDSP-
701E
711E
703E
713E
Parameter
Luminous Intensity/Dot
(Digit Average)[1]
Peak Wavelength
Dominant Wavelength[2]
Forward Voltage
Symbol
IV
Min.
1.289
␭PEAK
␭d
VF
Typ.
2.500
632
622
2.05
Reverse Voltage[3]
Luminous Intensity
Matching Ratio
VR
⌱V-M
Max. Units
mcd
3.40
2.50
1.60
5
nm
nm
V
V
2:1
Test
Conditions
IF = 50 mA,
20% Duty Factor
IF = 20 mA
IF = 20 mA
IF = 50 mA
IF = 20 mA
IF = 5 mA
IR = 100 µA
IF = 50 mA
20% Duty Factor
4
Optical/Electrical Characteristics at TA = 25°C, continued
Green
Devices
HDSP-
701G
711G
703G
713G
Parameter
Luminous Intensity/Dot
(Digit Average)[1]
Peak Wavelength
Dominant Wavelength[2]
Forward Voltage
Reverse Voltage[3]
Luminous Intensity
Matching Ratio
Symbol
IV
Min.
0.96
␭PEAK
␭d
VF
VR
⌱V-M
Typ.
2.50
Max. Units
mcd
568
573
1.80
1.60
5
2.25
3.40
2.60
nm
nm
V
V
2:1
Test
Conditions
IF = 50 mA,
20% Duty Factor
IF = 20 mA
IF = 20 mA
IF = 50 mA
IF = 20 mA
IF = 5 mA
IR = 100 µA
IF = 50 mA
20% Duty Factor
AlGaAs
Devices
HDSP-
701A
711A
703A
713A
Parameter
Luminous Intensity/Dot
(Digit Average)[1]
Peak Wavelength
Dominant Wavelength[2]
Forward Voltage
Voltage[3]
Reverse
Luminous Intensity
Matching Ratio
Symbol
IV
Min.
1.55
␭PEAK
␭d
VF
VR
⌱V-M
Typ.
2.10
660
643
1.8
Max. Units
mcd
2.0
2.0
1.5
5
nm
nm
V
V
1.5:1
Test
Conditions
IF = 10 mA,
20% Duty Factor
IF = 20 mA
IF = 20 mA
IF = 20 mA
IF = 10 mA
IF = 5 mA
IR = 100 µA
IF = 10 mA
20% Duty Factor
Notes:
1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
2. The dominant wavelength, ␭d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Typical specification for reference only. Do not exceed absolute maximum ratings.
30
GREEN, HER
25
20
15
AlGaAs
10
5
0
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE – °C
Figure 1. Maximum Allowable Average Current
Per Dot vs. Ambient Temperature.
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
4.0
3.5
GREEN, HER
3.0
2.5
AlGaAs
2.0
1.5
1.0
0.5
0
0
5
10
15
20
25
30
35
40
IF – DC FORWARD CURRENT – mA
Figure 3. Relative Luminous Intensity vs.
DC Forward Current.
IF – FORWARD CURRENT PER SEGMENT – mA
35
90
80
AlGaAs
HER
70
60
50
40
30
20
GREEN
10
0
1
2
3
5
4
VF – FORWARD VOLTAGE – V
Figure 2. Forward Current vs. Forward Voltage.
ηV – RELATIVE EFFICIENCY
(NORMALIZED TO/AT 10 mA PER SEGMENT)
IDC – MAXIMUM DC CURRENT PER SEGMENT – mA
5
1.4
RED
1.3
GREEN
1.2
1.1
AlGaAs
1.0
0.9
0.8
0 10 20 30 40 50 60 70 80 90 100
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 4. Relative Efficiency (Luminous Intensity
Per Unit Current Per Dot) vs. Peak Current Per Dot.
6
Intensity Bin Limits[1]
(mcd at 50 mA, 20% Duty Factor)
High Efficiency Red
Bin name
E
F
G
H
Green
Bin name
H
I
J
K
L
Min.[2]
1.289
1.934
2.900
4.350
Min.[2]
0.96
1.44
2.15
3.23
4.85
Max.[2]
1.934
2.900
4.350
6.525
Max.[2]
1.44
2.15
3.23
4.85
7.28
Notes:
1. Bin categories are established for classification of products.
Products may not be available in all bin categories.
2. Tolerance for each intensity bin limit is ± 10%.
(mcd at 10 mA, 20% Duty Factor)
AlGaAs
Bin name
I
J
Min.[2]
1.55
2.33
Max.[2]
2.33
3.49
Notes:
1. Bin categories are established for classification of products.
Products may not be available in all bin categories.
2. Tolerance for each intensity bin limit is ± 10%.
Color Bin Limits (Dominant Wavelength)
Color
Green
Bin
2
3
4
5
Dominant Wavelength (nm)
Min.
Max.
573.6
576.5
570.6
573.5
567.6
570.5
564.5
567.5
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your local
Agilent representatives for further clarification/information.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride, trichloroethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
various solvents attack or dissolve
the encapsulating epoxies used
to form the package of plastic
LED parts.
For information on soldering
LEDs, please refer to Application
Note 1027.
Device Reliability
For reliability information, please
see the reliability datasheet
17.3 mm General Purpose
5 x 7 Dot Matrix Alphanumeric
Displays.
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004 Agilent Technologies, Inc.
Obsoletes 5988-5400EN
July 8, 2004
5988-8400EN
Similar pages