Ceramic Bandpass Filter 50Ω BFCN-3010+ 2920 to 3100 MHz Maximum Ratings Operating Temperature -55°C to 100°C Storage Temperature -55°C to 100°C RF Power Input* 1.5W at 25°C *Passband rating, derate linearly to 0.25W at 100°C ambient Permanent damage may occur if any of these limits are exceeded. Pin Connections RF IN 1 RF OUT 3 GROUND Features • • • • Good VSWR, 1.6:1 typ @ passband Small size Temperature stable LTCC construction +RoHS Compliant Applications The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications • Harmonic Rejection • Transmitters / Receivers • Point-to-Point communications Electrical Specifications1,2 at 25°C 2,4 Outline Drawing CASE STYLE: FV1206 Parameter F# Frequency (MHz) F1-F2 F1-F2 2920-3100 2920-3100 DC-F5 DC-F3 DC-F3 F4-F6 F6-F7 F4-F7 DC-1300 DC-1530 DC-1530 4450-4650 4650-6600 4450-6600 Center Frequency Insertion Loss VSWR Pass Band Insertion Loss Stop Band, Lower VSWR Insertion Loss Stop Band, Upper VSWR Min. Typ. Max. Unit 6 3.0 MHz dB :1 3010 1.6 30 20 20 20 dB dB :1 30 20 dB dB :1 1. Measured on Mini-Circuits Characterization Test Board TB-270. 2. This filter is not intended for use as a DC Blocking circuit element. In Application where DC voltage is present at either input or output ports, blocking capacitors are required at the corresponding RF port. ATTENUATION (dB) Typical Frequency Response PCB Land Pattern Functional Schematic RF IN RF OUT 30 20 6 F5 F3 F1 F2 F4 F6 FREQUENCY (MHz) DC F7 Typical Performance Data at 25°C Suggested Layout, Tolerance to be within ±.002 Frequency (MHz) Insertion Loss (dB) 50 500 1300 1530 2700 2800 86.94 48.07 31.07 28.16 18.27 7.88 248.17 86.86 62.05 57.91 8.31 3.46 2920 3000 3010 3050 3100 3200 3.03 2.73 2.56 2.92 3.15 5.82 1.53 1.50 1.53 1.66 1.83 1.98 3250 3400 4100 4450 4650 6600 10.05 19.93 28.17 29.63 34.88 29.26 2.45 7.08 18.50 19.87 20.70 17.39 Outline Dimensions ( inch mm ) B .063 1.60 C .037 0.94 D .020 0.51 E .032 0.81 F .009 0.23 J .024 0.61 K .122 3.10 L .024 0.61 M .087 2.21 N .012 0.30 P .071 1.80 G .169 4.29 H .087 2.21 wt grams 0.20 Demo Board MCL P/N: TB-270 Suggested PCB Layout (PL-137) .098 ø.015 PTH, 8 PL. .072 TYP .021 TYP COPLANAR WAVEGUIDE: .038 TRACE WIDTH, & .013 GAP, 2 PL. (SEE NOTE BELOW) .028 TYP .024 TYP BFCN-3010+ INSERTION LOSS PIN 1 90 4.0 .019, 2 PL. NOTES: 1. COPLANAR WAVEGUIDE PARAMETERS ARE SHOWN FOR ROGERS RO4350B WITH THICKNESS .020” ± .0015”. COPPER: 1/2 OZ. EACH SIDE. FOR OTHER MATERIALS TRACE WIDTH & GAP MAY NEED TO BE MODIFIED. 2. BOTTOM SIDE OF THE PCB IS CONTINUOUS GROUND PLANE. DENOTES PCB COPPER LAYOUT WITH SMOBC (SOLDER MASK OVER BARE COPPER) DENOTES COPPER LAND PATTERN FREE OF SOLDER MASK INSERTION LOSS (dB) 80 DUT PACKAGE OUTLINE BFCN-3010+ VSWR 10000 2.0 1.8 1.6 1.4 1.2 2920 2950 2980 3010 3040 3070 3100 3.5 70 1000 3.0 60 2.5 50 2.0 2920 2950 2980 3010 3040 3070 3100 40 VSWR A .126 3.20 VSWR (:1) 100 30 10 20 10 1 0 0 1000 2000 3000 4000 5000 6000 7000 0 1000 2000 3000 4000 5000 6000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp 7000 FREQUENCY (MHz) Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. A M151121 EDR-9332/1F1 BFCN-3010+ RAV/URJ 161102 Page 1 of 1