ON NL17SZ17XV5T2GH Single non-inverting buffer with schmitt trigger Datasheet

NL17SZ17
Single Non-Inverting Buffer
with Schmitt Trigger
The NL17SZ17 is a single Non−inverting Schmitt Trigger Buffer in
three tiny footprint packages. The device performs much as LCX
multi−gate products in speed and drive.
www.onsemi.com
Features
•
•
•
•
•
•
Tiny SOT−353, SOT−553 and SOT−953 Packages
Source/Sink 24 mA at 3.0 Volts
Chip Complexity: FETs = 20
Designed for 1.65 V to 5.5 V VCC Operation
NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MARKING
DIAGRAMS
SC−88A
(SC−70−5/SOT−353)
DF SUFFIX
CASE 419A
5
1
5
LX MG
G
1
5
1
5
SOT−553
XV5 SUFFIX
CASE 463B
LX MG
G
1
NC
1
VCC
A
VCC
5
1
5
LX = Specific Device Code
M = Date Code*
G = Pb−Free Package
(Note: Microdot may be in either location)
GND
A
2
*Date Code orientation and/or position may
vary depending upon manufacturing location.
2
GND
NC
Y
4
3
4
SOT−953
CASE 527AE
M
1
A
= Specific Device Code
(A with 90 degree clockwise rotation)
M = Month Code
SOT−953
SOT−353/SC70−5/
SC−88A/SOT−553
A
3
Y
Figure 1. Pinout (Top View)
ORDERING INFORMATION
Y
A
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
Figure 2. Logic Symbol
PIN ASSIGNMENT
PIN ASSIGNMENT (SOT−953)
(SOT−353/SC70−5/SC−88A/SOT−553)
FUNCTION TABLE
Pin
Function
Input
Output
Pin
Function
1
IN A
A
Y
1
NC
2
GND
L
L
2
A
3
NC
H
H
3
GND
4
Y
4
Y
5
VCC
5
VCC
© Semiconductor Components Industries, LLC, 2016
January, 2016 − Rev. 16
1
Publication Order Number:
NL17SZ17/D
NL17SZ17
MAXIMUM RATINGS
Symbol
VCC
Parameter
Value
Unit
−0.5 to +7.0
V
−0.5 ≤ VI ≤ +7.0
V
−0.5 to +7.0
V
−0.5 to VCC + 0.5
V
VI < GND
−50
mA
DC Supply Voltage
VI
DC Input Voltage
VO
DC Output Voltage
Output in High or LOW State (Note 1)
(SOT−353/SC70−5/SC−88A/SOT−553 Packages)
Power−Down Mode
VO
DC Output Voltage (SOT−953 Package)
IIK
DC Input Diode Current
IOK
DC Output Diode Current
(SOT−953 Package)
VO < GND, VO > VCC
±50
mA
IOK
DC Output Diode Current (SOT−353/SC70−5/SC−88A/SOT−553 Packages) VO < GND
−50
mA
IO
DC Output Sink Current
±50
mA
ICC
DC Supply Current per Supply Pin
±100
mA
IGND
DC Ground Current per Ground Pin
±100
mA
TSTG
Storage Temperature Range
−65 to +150
°C
TL
Lead Temperature, 1 mm from Case for 10 Seconds
260
°C
TJ
Junction Temperature under Bias
+150
°C
qJA
Thermal Resistance
SOT−353 (Note 2)
SOT−553
350
496
°C/W
PD
Power Dissipation in Still Air at 85°C
SOT−353
SOT−553
186
135
mW
MSL
Moisture Sensitivity
FR
Flammability Rating
ESD
ESD Classification
ILatchup
Level 1
Oxygen Index: 28 to 34
UL 94 V−0 @ 0.125 in
Human Body Model (Note 3)
Machine Model (Note 4)
Charged Device Model
Class 2
Class C
N/A
±500
Latchup Performance Above VCC and Below GND at 85°C (Note 5)
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. IO absolute maximum rating must be observed.
2. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2−ounce copper trace with no air flow.
3. Tested to EIA/JESD22−A114−A, rated to EIA/JESD22−A114−B.
4. Tested to EIA/JESD22−A115−A, rated to EIA/JESD22−A115−A.
5. Tested to EIA/JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
Parameter
Supply Voltage
Operating
Data Retention Only
Min
Max
Unit
1.65
1.5
5.5
5.5
V
0
5.5
V
VI
Input Voltage, (Note 6)
VO
Output Voltage
(SOT−353/SC70−5/SC−88A/SOT−553 Packages)
(HIGH or LOW State)
0
5.5
V
VO
Output Voltage (SOT−953 Package)
(HIGH or LOW State)
0
VCC
V
TA
Operating Free−Air Temperature
−55
+125
°C
Dt/DV
Input Transition Rise or Fall Rate
0
0
0
No Limit
No Limit
No Limit
ns/V
VCC = 2.5 V ±0.2 V
VCC = 3.0 V ±0.3 V
VCC = 5.0 V ±0.5 V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
6. Unused inputs may not be left open. All inputs must be tied to a high−logic voltage level or a low−logic input voltage level.
www.onsemi.com
2
NL17SZ17
DC ELECTRICAL CHARACTERISTICS
VCC
(V)
−555C 3 TA 3 1255C
TA = 255C
Min
Typ
Max
Min
Max
Units
VT)
Positive Input
Threshold Voltage
1.65
2.3
2.7
3.0
4.5
5.5
0.6
1.0
1.2
1.3
1.9
2.2
1.0
1.5
1.7
1.9
2.7
3.3
1.4
1.8
2.0
2.2
3.1
3.6
0.6
1.0
1.2
1.3
1.9
2.2
1.4
1.8
2.0
2.2
3.1
3.6
V
VT*
Negative Input
Threshold Voltage
1.65
2.3
2.7
3.0
4.5
5.5
0.2
0.4
0.5
0.6
1.0
1.2
0.5
0.75
0.87
1.0
1.5
1.9
0.8
1.15
1.4
1.5
2.0
2.3
0.2
0.4
0.5
0.6
1.0
1.2
0.8
1.15
1.4
1.5
2.0
2.3
V
Input Hysteresis Voltage
1.65
2.3
2.7
3.0
4.5
5.5
0.1
0.25
0.3
0.4
0.6
0.7
0.48
0.75
0.83
0.93
1.2
1.4
0.9
1.1
1.15
1.2
1.5
1.7
0.1
0.25
0.3
0.4
0.6
0.7
0.9
1.1
1.15
1.2
1.5
1.7
V
VCC *0.1
1.29
1.9
2.2
2.4
2.3
3.8
VCC
1.52
2.1
2.4
2.7
2.5
4.0
Symbol
VH
Parameter
Condition
VOH
High−Level Output Voltage
VIN = VIH or VIL
IOH = −100 mA
IOH = −3 mA
IOH = *8 mA
IOH = *12 mA
IOH = *16 mA
IOH = *24 mA
IOH = *32 mA
1.65 to 5.5
1.65
2.3
2.7
3.0
3.0
4.5
VOL
Low−Level Output Voltage
VIN = VIH or VIL
IOL = 100 mA
IOL = 3 mA
IOL = 8 mA
IOL = 12 mA
IOL = 16 mA
IOL = 24 mA
IOL = 32 mA
1.65 to 5.5
1.65
2.3
2.7
3.0
3.0
4.5
Input Leakage Current
VIN = 5.5 V or GND
IOFF
Power Off Leakage
Current (SOT−353/
SC70−5/SC−88A/
SOT−553 Packages)
VIN = 5.5 V or
VOUT = 5.5 V
ICC
Quiescent Supply Current
VIN = 5.5 V or GND
IIN
VCC *0.1
1.29
1.9
2.2
2.4
2.3
3.8
V
0.1
0.24
0.3
0.4
0.4
0.55
0.55
0.1
0.24
0.3
0.4
0.4
0.55
0.55
V
0 to 5.5
±0.1
±1.0
mA
0
1.0
10
mA
5.5
1.0
10
mA
0.08
0.2
0.22
0.28
0.38
0.42
AC ELECTRICAL CHARACTERISTICS (Input tr = tf = 3.0 ns)
Symbol
tPLH
tPHL
Min
Typ
Max
Min
Max
Units
RL = 1 MW, CL = 15 pF
1.65
1.8
2.5 ± 0.2
3.3 ± 0.3
5.0 ± 0.5
2.0
2.0
1.0
1.0
0.5
9.1
7.6
5.0
3.7
3.1
15
12.5
9.0
6.3
5.2
2.0
2.0
1.0
1.0
0.5
15.6
13
9.5
6.5
5.5
ns
RL = 500 W, CL = 50 pF
3.3 ± 0.3
5.0 ± 0.5
1.5
0.8
4.4
3.7
7.2
5.9
1.5
0.8
7.5
6.2
Parameter
Propagation Delay
Input A to Y
(Figures 3 and 4)
−555C 3 TA 3 1255C
TA = 255C
VCC
(V)
Condition
CAPACITIVE CHARACTERISTICS
Symbol
Parameter
Condition
CIN
Input Capacitance
VCC = 5.5 V, VI = 0 V or VCC
CPD
Power Dissipation Capacitance
(Note 7)
10 MHz, VCC = 3.3 V, VI = 0 V or VCC
10 MHz, VCC = 5.5 V, VI = 0 V or VCC
Typical
Units
u2.5
pF
9
11
pF
7. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.
Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no−load dynamic
power consumption; PD = CPD VCC2 fin + ICC VCC.
www.onsemi.com
3
NL17SZ17
INPUT
VCC
A or B
OUTPUT
50%
GND
tPLH
Y
RL
A 1 MHz square input wave is recommended for
propagation delay tests.
50% VCC
Figure 4. Test Circuit
Figure 3. Switching Waveforms
VT , TYPICAL INPUT THRESHOLD VOLTAGE (VOLTS)
CL
tPHL
4
3
(VT))
2
VHtyp
(VT*)
1
2
3
2.5
3.5
VCC, POWER SUPPLY VOLTAGE (VOLTS)
VHtyp = (VT) typ) − (VT* typ)
3.6
Figure 5. Typical Input Threshold, VT), VT* versus Power Supply Voltage
VH
Vin
VCC
VH
VT)
VT*
VCC
VT)
VT*
Vin
GND
GND
VOH
VOH
Vout
Vout
VOL
(a) A Schmitt−Trigger Squares Up Inputs With Slow
Rise and Fall Times
VOL
(b) A Schmitt−Trigger Offers Maximum Noise Immunity
Figure 6. Typical Schmitt−Trigger Applications
www.onsemi.com
4
NL17SZ17
DEVICE ORDERING INFORMATION
Device Order
Number
Package
Type
Tape/Reel Size†
NL17SZ17DFT2G
SC−88A/SC−70−5/SOT−353
(Pb−Free)
3000 Units / Tape & Reel
NLV17SZ17DFT2G*
SC−88A/SC−70−5/SOT−353
(Pb−Free)
3000 Units / Tape & Reel
NL17SZ17XV5T2G
SOT−553
(Pb−Free)
4000 Units / Tape & Reel
NL17SZ17XV5T2GH
SOT−553
(Pb−Free)
4000 Units / Tape & Reel
NL17SZ17P5T5G
SOT−953
(Pb−Free)
8000 Units / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.
PACKAGE DIMENSIONS
SOT−553
XV5 SUFFIX
CASE 463B
ISSUE B
D
−X−
5
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETERS
3. MAXIMUM LEAD THICKNESS INCLUDES
LEAD FINISH THICKNESS. MINIMUM LEAD
THICKNESS IS THE MINIMUM THICKNESS
OF BASE MATERIAL.
A
L
4
1
2
E
−Y−
3
b
e
HE
c
5 PL
0.08 (0.003)
DIM
A
b
c
D
E
e
L
HE
M
X Y
MILLIMETERS
NOM
MAX
0.55
0.60
0.22
0.27
0.13
0.18
1.60
1.70
1.20
1.30
0.50 BSC
0.10
0.20
0.30
1.50
1.60
1.70
MIN
0.50
0.17
0.08
1.50
1.10
SOLDERING FOOTPRINT*
0.3
0.0118
0.45
0.0177
1.35
0.0531
1.0
0.0394
0.5
0.5
0.0197 0.0197
SCALE 20:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
5
INCHES
NOM
0.022
0.009
0.005
0.063
0.047
0.020 BSC
0.004
0.008
0.059
0.063
MIN
0.020
0.007
0.003
0.059
0.043
MAX
0.024
0.011
0.007
0.067
0.051
0.012
0.067
NL17SZ17
PACKAGE DIMENSIONS
SC−88A (SC−70−5/SOT−353)
CASE 419A−02
ISSUE L
A
G
5
4
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 419A−01 OBSOLETE. NEW STANDARD
419A−02.
4. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.
−B−
S
1
2
DIM
A
B
C
D
G
H
J
K
N
S
3
D 5 PL
0.2 (0.008)
B
M
M
N
INCHES
MIN
MAX
0.071
0.087
0.045
0.053
0.031
0.043
0.004
0.012
0.026 BSC
--0.004
0.004
0.010
0.004
0.012
0.008 REF
0.079
0.087
J
C
K
H
SOLDERING FOOTPRINT*
0.50
0.0197
0.65
0.025
0.65
0.025
0.40
0.0157
1.9
0.0748
SCALE 20:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
6
MILLIMETERS
MIN
MAX
1.80
2.20
1.15
1.35
0.80
1.10
0.10
0.30
0.65 BSC
--0.10
0.10
0.25
0.10
0.30
0.20 REF
2.00
2.20
NL17SZ17
PACKAGE DIMENSIONS
SOT−953
CASE 527AE
ISSUE E
X
D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD
FINISH. MINIMUM LEAD THICKNESS IS THE
MINIMUM THICKNESS OF THE BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR GATE BURRS.
A
Y
5
4
PIN ONE
INDICATOR
HE
E
1
2 3
DIM
A
b
C
D
E
e
HE
L
L2
L3
C
TOP VIEW
SIDE VIEW
e
L
5X
5X
L3
MILLIMETERS
MIN
NOM
MAX
0.34
0.37
0.40
0.10
0.15
0.20
0.07
0.12
0.17
0.95
1.00
1.05
0.75
0.80
0.85
0.35 BSC
0.95
1.00
1.05
0.175 REF
0.05
0.10
0.15
−−−
−−−
0.15
SOLDERING FOOTPRINT*
5X
0.35
5X
0.20
5X
L2
5X
BOTTOM VIEW
b
PACKAGE
OUTLINE
0.08 X Y
1.20
1
0.35
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
7
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NL17SZ17/D
Similar pages