Megawin MG39133AS Over voltage protection Datasheet

MG39133
6 Taps, Linear LED driver
with sequential on/off control
MG39133
Data Sheet
Version: V1.06
This document contains information on a new product under development by Megawin. Megawin reserves the right to change or
discontinue this product without notice.
 Megawin Technology Co., Ltd. 2014 All rights reserved.
2014/07 version 1.06
Contents
Features ................................................................................................................. 3
1 Description ........................................................................................................ 4
2 Order Information .............................................................................................. 4
3 Application Field................................................................................................ 4
4 Pin Description .................................................................................................. 5
4.1
4.2
5
6
7
8
9
10
11
Pin Definition .................................................................................................................. 5
Pin Configuration............................................................................................................ 5
Block Diagram................................................................................................... 6
Application Circuit ............................................................................................. 6
Absolute Maximum Rating ................................................................................ 7
Electrical Characteristics................................................................................... 7
Typical Performance Characteristic.................................................................. 8
Application information...................................................................................... 9
Package Dimension ........................................................................................ 10
11.1
11.2
e-TSSOP16 Package Dimension ................................................................................. 10
e-SOP16 Package Dimension...................................................................................... 11
12 Revision History .............................................................................................. 11
2
MG39133 Data Sheet
MEGAWIN
Features
l
l
l
l
l
l
l
l
l
ILED current is programmable with external resistor
Simple application, very few external components
No inductor, electrolytic capacitor
PF>0.9
THDi < 25%
High LED utilization rate, 75%~90%
Over voltage protection
Temperature compensated
16 Pin e-TSSOP, e-SOP Package
MEGAWIN
MG39133 Data Sheet
3
1 Description
The MG39133 is a high precision linear LED controller. It is designed to drive a 6‐taps low power LED string
directly form AC line input. Electrolytic capacitor is not required; so long operating life is possible. No EMI filter
and PF correction circuits are needed.
The LED string is configured into 6 segments. With state‐of‐art control scheme, each segment is sequentially
turned on and off by tracking the input sine wave voltage. Voltage applied on IC is minimized when conducting,
providing high efficiency. The AC voltage and line ‐input current could be tuned in phase, so the high PF is
possible. There is no PWM switching control in the chip, also the line‐in current is tracking with the AC input with
six step level, the THD i could be tuned very low. The ILED current is also programmed by external resister to fulfill
various types of power requirement. The maximum supported wattage is 19.5W.
The MG39133 also builds in UVLO control, over temperature and over voltage protection circuit. The device is
available in e-TSSOP16, e-SOP16 package or dice form.
2 Order Information
Current
120mA (Max)
Package Type
Dice
MG39133AH
e-TSSOP16
MG39133AT
e-SOP16
MG39133AS
3 Application Field
Incandescent and Fluorescent lamp/tube replacement
4
MG39133 Data Sheet
MEGAWIN
4 Pin Description
4.1 Pin Definition
Pin No.
Pin Name
I/O
Description
1
VTH1
I
LED power down control pin; VTH1<1.2V à Power down
2
GND
G
Ground pin
3
SET1
IO
Current control input for TAP1
4
SET2
IO
Current control input for TAP2
5
SET3
IO
Current control input for TAP3
6
SET4
IO
Current control input for TAP4
7
SET5
IO
Current control input for TAP5
8
SET6
IO
Current control input for TAP6
9
TAP6
O
Current regulator 6 output, connect it to tap of LED string
10
TAP5
O
Current regulator 5 output, connect it to tap of LED string
11
TAP4
O
Current regulator 4 output, connect it to tap of LED string
12
TAP3
O
Current regulator 3 output, connect it to tap of LED string
13
TAP2
O
Current regulator 2 output, connect it to tap of LED string
14
TAP1
O
Current regulator 1 output, connect it to tap of LED string
15
VIN
I
High voltage input pin, connect to rectified AC
16
VTH2
I
LED power down control pin; VTH2>1.2V à Power down
4.2 Pin Configuration
MEGAWIN
MG39133 Data Sheet
5
5 Block Diagram
6 Application Circuit
M
O
V
RZ
10
BD1
MB6S
TVS
Rin
15K
Rc
Ra
VTH1
Z1
5.1V
Rb
Rc
UVP
OVP
VTH2
GND
VIN
SET1
TAP1
SET2
TAP2
SET3
TAP3
SET4
TAP4
SET5
TAP5
SET6
TAP6
RS1
RS2
RS3
RS4
RS5
RS6
6
MG39133 Data Sheet
MEGAWIN
7 Absolute Maximum Rating
Parameter
Rating
Unit
VIN Supply Voltage
-0.5 to +530
V
Operating temperature
-40 to +125
°C
Storage temperature
-55 to +155
°C
Note: Operating temperature is strongly related to the power consumption of IC.
8 Electrical Characteristics
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Unit
VIN
VVIN - VGND
7.5
-
500
V
VSTART
VVIN - VGND
-
6.5
-
V
VUVLO
VVIN - VGND
-
5.5
-
V
IIN
All input range
-
400
-
uA
IUVLO
All input range
-
100
-
uA
VSETa
All input range
-
1.1
-
V
SET5~6 Compare Level
VSETb
All input range
-
1.2
-
V
SET1 ~ SET6 Compare Level
Temperature Coefficient
△VSET/△T
Junction Temperature (TJ):
-40℃ ~ +125℃
-
-0.03
-
%/℃
OVP/UVP Compare Level
VTH1, 2
All input range
-
1.2
-
V
ITAP1 ~ 2
VTAP =10V, TJ = 125 ℃
-
-
50
mA
ITAP3 ~ 6
VTAP =10V, TJ = 125 ℃
-
-
120
mA
-
-
500
V
-
-
250
V
-
160
-
℃
-
50
-
℃
Input Voltage
VIN Start-up Voltage
VIN UVLO Voltage
Input Current
Input Current at UVLO
SET1~4 Compare Level
TAPx Current
Applied Voltage on TAP
VTAPa
TAP1, Non‐conducting
*1
VTAPb
TAP2 ~6, Non‐conducting
OTP Protection Temperature
TJOTP
Junction Temperature
OTP Hysteresis Window
TJOTPHW
*1
Note: *1, Applied voltage is determined by power dissipation.
MEGAWIN
MG39133 Data Sheet
7
9 Typical Performance Characteristic
ITAP1&2 Current vs. Vin Voltage / Temperature
Current set to around 45mA
55
50
-40Deg.
-20Deg
0Deg.
20Deg.
40Deg.
60Deg.
80Deg.
100Deg.
120Deg
130Deg.
140Deg.
(mA)
45
40
35
30
25
20
0
20
40
60
80
100
(V)
ITAPS3~6 Current vs. VIN voltage / Temperature
Current set to around 95mA
110
105
-40Deg.
-20Deg
0Deg.
20Deg.
40Deg.
60Deg.
80Deg.
100Deg.
120Deg
130Deg.
140Deg.
100
95
(mA)
90
85
80
75
70
65
60
0
20
40
60
80
100
(V)
8
MG39133 Data Sheet
MEGAWIN
10 Application information
Current Setting
If the application circuit is same as below
The current setting will be
ITAP6 = (1.2V ÷ (RSET6))
ITAP5 = (1.1V ÷ (RSET6 + RSET5))
ITAP4 = (1.1V ÷ (RSET6 + RSET5 + RSET4))
ITAP3 = (1.1V ÷ (RSET6 + RSET5 + RSET4 + RSET3))
ITAP2 = (1.1V ÷ (RSET6 + RSET5 + RSET4 + RSET3 + RSET2))
ITAP1 = (1.1V ÷ (RSET6 + RSET5 + RSET4 + RSET3 + RSET2+ RSET1))
RSET6 = (1.2V ÷ ITAP6)
RSET5 = (1.1V ÷ ITAP5) – RSET6
RSET4 = (1.1V ÷ ITAP4) – RSET6 – RSET5
RSET3 = (1.1V ÷ ITAP3) – RSET6 – RSET5 – RSET4
RSET2 = (1.1V ÷ ITAP2) – RSET6 – RSET5 – RSET4 – RSET3
RSET1 = (1.1V ÷ ITAP1) – RSET6 – RSET5 – RSET4 – RSET3 – RSET2
The MG39133 can sustain an input voltage level as high as 500V. But users should care the heat dissipation
issue for their applications. For large wattage application, the 131 will consumes 2W~3W power. The IC’s heatsink should be firmly attached to the substrate. Aluminum or Ceramic PCB is recommended.
Package Thermal Resistance
The thermal resistance is around 66°C /W, junction to ambient (no air flow)
Note: Rule of thumb, it is suggested that the IC surface temperature is maintained below 90
°C (Celsius degree). For ETSSOP16
package, maintain the power dissipation below 1.5W.
MEGAWIN
MG39133 Data Sheet
9
11 Package Dimension
11.1 e-TSSOP16 Package Dimension
10
MG39133 Data Sheet
MEGAWIN
11.2 e-SOP16 Package Dimension
12 Revision History
Rev
Descriptions
Date
V1.01 Initial release.
2013/01/29
V1.02 Modify the package
2013/05/20
V1.03 Modify the TAP current
2013/08/06
V1.04 Rename Model name
2014/02/07
V1.05 Modify VTH1 polarity
2014/05/26
V1.06 Add test data and revise application diagram
2014/07/24
MEGAWIN
MG39133 Data Sheet
11
Similar pages