LIGITEK LG-5630WKZ-DT-1-P-NW-D04 0.4w power light led Datasheet

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
0.4W Power Light LED
Pb
Lead-Free Parts
LG-5630WKZ-DT-1-P-NW-D04
DATA SHEET
DOC. NO :
QW0905-LG-5630WKZ-DT-1-P-NW-D04
REV.
:
A
DATE
:
13 - Apr. - 2012
發行
立碁電子
DCC
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Product Model Designation System
LG - 56 30 WK Z - D T - 1 - P - NW - XXX
X1
X2
X1
Title
LG:Ligitek
X6
Epoxy Color
D:Yellow Diffused
X3
X4
X2
Dimension(L)
57:5.7mm
56:5.6mm
X7
Package
T:Tape&Reel
X5
X6 X7
X3
X8
X9
X4
Dimension(W)
Emitting Color
30:3.0mm
WK:White Color
X10
X11
X5
Zener
X8
X9
X10
Chip Modification
Patent
Chromaticity Coordinates
-X: 2 chip in 1(Parallel)
P: IP Free
-CW: Cool White
-NW: Neutral White
-WW: Warm White
-1: 1 chip in 1
-2: 2 chip in 1(Series)
X11
Bin Modification
Page 1/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Typical Applications
Features
*. White colored SMTpackage
*.Suitable for all SMT assembly and soldering methodes
*. Pb-Free Reflow soldering application
*. More Energy Efficient than lncandescent and most Halogen lamps.
*. RoHS compliant
*. Reading Light (car,bus,aircraft)
*. Portable(flashlight,bicycle).
*. Backlights(Monitor,TV) / Light Guides.
*. Automotive Exterior (Stop-Tail-Tum,CHMSL,Mirror Side Repeat).
*. Commercial and Residential Architectural lighting.
*. Mini-accent / Uplighters / Downlighters / Orientation lighting
*. Fiber Optic Alternative / Decorative / Entertainment lighting.
*. Security / Garden lighting.
*. Cove / Undershelf / Task lighting.
*. Traffic signaling / Beacons / Rail crossing and Wayside lighting.
Dimension
5.3
C
3.0
A
C
Recommended Solder Patterns
5.6
2.0
0.9
1.6
1.62
3.8
6.8
0.5
0.8
1.28
0.5 2.1
Slug
Anode(+)
0.3 2.3
0.8
Cathode(-)
Note:
1.The tolerance unless mentioned is ±0.1mm,unit=mm.
2.The slug has polarity as anode.
3.It is strongly recommended to apply on electrically isolated
heat conducting film between the slug and contact surfaces.
Page 2/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Absolute Maximum Ratings at Ta=25 ℃
Ratings
Parameter
Symbol
UNIT
White
DC Forward Current
IF
150
mA
Power Dissipation
PD
0.54
W
Peak pulse current
Duty 1/10@10KHz
IFP
200
mA
LED junction Temperature
Tj
125
℃
Rth JS
40
°C/W
Reverse Current(VR=5V)
Ir
10
μA
ESD Sensitivity
VB
±2000
V
Storage Temperature
Tstg
-40 ~ +100
℃
Operating Temperature
Topr
-40 ~ +85
℃
Soldering Temperature
Tp
260
℃
Hand Soldering Time
at320°C(Max)
Tsol
3
seconds
Thermal Resistance
Junction/solder point
Note:
1.Proper current derating must be observed to maintain temperature below the maximum.
2.LEDS are not designed to be driven in reverse bias.
Luminous Intensity Characteristics at 120mA
(Ratings At 25°C Ambient)
Luminous Intensity
PART NO
Emission
Color
Min.
Typ.
Max.
LG-5630WKZ-DT-1-P-NW-D04
White
36
39
----
Note :
1. White emitters are built with InGaN.
2. Luminous Intensity is measured with an accuracy of ±10%
Page 3/15
Units
lm
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Forward Voltage Characteristics at 120mA
(Ratings At 25°C Ambient)
Vf
PART NO
Emission
Color
Min.
Typ.
Max.
LG-5630WKZ-DT-1-P-NW-D04
White
2.8
----
3.6
Units
V
Note : Forward Voltage is measured with an accuracy of±0.1V
Chromaticity Coordinates Characteristics at 120mA
(Ratings At 25℃ Ambient )
PART NO
Emission
Color
LG-5630WKZ-DT-1-P-NW-D04
White
Chromaticity Coordinates
X
Y
Max.
Max.
Min.
Min.
0.329
0.361
0.331
0.3845
Note : ±0.01 is tester tolerance.
Emission Angle Characteristics at 120mA
(Ratings At 25°C Ambient )
PART NO
Emission
Color
Lambertian
Units
LG-5630WKZ-DT-1-P-NW-D04
White
120
Degrees
Color Rendering Index Characteristics at 120mA
(Ratings At 25°C Ambient )
CRI
PART NO
Emission
Color
Min.
Typ.
Max.
LG-5630WKZ-DT-1-P-NW-D04
White
80
----
----
Note : 1. The CRI value is base on the LIGITEK testing instrument.
2. CRI measurement tolerance:±2
Page 4/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Bin Code Description
Bin Code
Luminous
Intensity
F45T
Luminous Intensity
(Lm)
@IF=120mA
Bin
Code
Min.
Max.
F36T
36
39
F39T
39
42
F42T
42
45
F45T
45
48
CIE
Forward
Voltage
WO
3.0-3.2
Color Rank
@IF=120mA
Forward Voltage(V)
@IF=120mA
UN
2.8-3.0
UO
3.0-3.2
VN
3.2-3.4
VO
Page 5/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Bins Code of chromaticity coordinates
Color Coordiante at 120mA
CCT(K)
4500~5000
5000~5650
BIN CODE
1
X
2
Y
X
3
Y
X
4
Y
X
Y
UN
0.347
0.372 0.3610 0.3845 0.3586 0.3702 0.346
0.359
UO
0.346
0.359 0.3586 0.3702 0.3559 0.3547 0.344
0.344
VN
0.329
0.357
0.347
0.372
0.346
0.359
0.329
0.345
VO
0.329
0.345
0.346
0.359
0.344
0.344
0.329
0.331
NOTE: Tolerance on each color bin(x,y)is±0.01
Page 6/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
The C.I.E 1931 Chromaticity Coordinates
0.44
0.42
4500K
0.40
5000K
0.38
5650K
UN
0.36
0.34
VN
VO
UO
0.32
0.30
0.32
0.34
0.36
Page 7/15
0.38
0.40
0.42
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Recommended Profile for Reflow Soldering
Pb -free solder temperature profile
Pb -free solder Temperature profile
Pre-heat
Pre-heat time
Peak-Temperature
Soldering time condition
180-200°C
120 Sec Max
260°C Max
10 Sec Max
260°C.Max.
10 Sec .Max.
1-5°C/Sec.
60 Sec.Max.
Above220°C
6°C/Sec.
Pre-heating
180-200°C
1-5°C/Sec.
120 Sec. Max.
(1) Reflow soldering should not be done more than two times.
(2) When soldering,do not put stress on the LEDs during heating.
(3) After soldering,do not warp the circuit board.
(4) The encapsulated material of the LEDs is silicone.
Precautions should be taken to avoid the strong pressure on the encapsulated part.
So when using the chip mounter,the picking up nozzle that does not affect the
silicone resin should be used.
Hand Soldering Conditions:
Do not exceed 3 seconds at maximum 320°C under soldering iron.(one time only)
Page 8/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Fig.1 Forward current vs. Forward Voltage
Forward Current(mA)
160
120
80
40
0
2.0
2.5
3.0
3.5
4.0
4.5
Forward Voltage(V)
Fig.2 Forward current vs.Luminous Intensity
Relative Luminous Intensity(%)
1.2
1.0
0.8
0.6
0.4
0.2
0
30
60
Page 9/15
90
120
150
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Fig.3 Luminous Spectrum(Ta=25 °C)
Relative Luminous Flux(%)
SPECTRAL RADIANCE
100
80
60
40
20
400
500
600
700
800
Wavelength (nm)
Fig.4 Directivity Radiation
0°
-30°
30°
-60°
100% 75% 50%
60°
25%
0
Page 10/15
25% 50% 75% 100%
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Carrier Type Dimensions
Loaded quantity 2000 PCS per reel
4.0
0.25
1.5
1.75
-
5.5
+
12.0±0.3
5.95
9.3
Polarity
4.0
3.25
1.2
Note : The tolerances unless mentioned is ±0.2mm.
Packing Specifications
Label
Aluminum Moist-Proof bag
Label
Desiccant
Page 11/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Label Explanation
Pb
LIGITEK ELECTRONICS CO., LTD.
PART :
LG-5630WKZ-DT-1-P-NW-D04
LOT :
GS1-060109
QTY(PCS):
2000
BIN/HUE :
F36T/VO
BIN : Luminous Flux
HUE : Chromaticity Coordinates
(CIE_x , CIE_y)
VF:3.0-3.2
VF : Forward Voltage
Reel Dimensions
16.0±1.0
60.2±0.5 178±1
13.5
Page 12/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Box Explanation
1. 4 BAG / INNER BOX
2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm
H
W
L
3. 10 INNER BOXES / CARTON
4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm
W
L
H
Page 13/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Reliability Test:
(1)Test items and results
Classification
Test Item
Test Condition
Sample
Size
Operating Life Test
1.Ta=Under Room Temperature As Per Data Sheet
Maximum Rating.
2.If=120mA
3.t=1000 hrs
22
High Temperature
Storage Test
1.Ta=105 ℃± 5℃
2.t=500 hrs
22
Low Temperature
Storage Test
1.Ta=-40 ℃±5℃
2.t=1000 hrs
22
High Temperature
High Humidity
Storage Test
1.IR-Reflow In-Board, 2 Times
2.Ta= 85℃± 5℃
3.RH=90 %~95%
4.t=500 hrs±2hrs
22
1.IR-Reflow In-Board,2 times
2.Ta=105 ℃ ±5℃ &
-40 ℃± 5℃
( 30min) (30min)
3.total 100 cycles
22
1.T.Sol=260 ℃±5℃
2.Dwell Time= 10 Max.
22
1.105 ℃ ~ 25℃ ~ - 40℃
30mins 15mins 30mins
2.10 0 Cyeles
22
Endurance
Test
Thermal Shock Test
Environmental
Test
Reflow Soldering Test
Temperature
Cycling
(2)Criteria for judging the damage
Item
Symbol Test Conditions
Criteria for Judgement
Min.
Max.
Forward Voltage
Vf
If=120mA
-
U.S.L x1.2
Reverse Current
Ir
Vr=5V
-
U.S.L x2.0
Luminous Intensity
Iv
L.S.L x 0.5
-
If=120mA
Page 14/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Precautions For Use:
Storage time:
1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%.
2.Once the package is opened, the products should be used within a week.
Otherwise, they should be kept in a damp proof box with descanting agent.
Considering the tape life, we suggest our customers to use our products within
a year(from production date).
3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%,
they should be treated at 60 ℃±5 ℃for 15hrs.
Drive Method:
LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into
the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series
with the LED.
Consider worst case voltage variations than could occur across the current limiting resistor. The forward
current should not be allowed to change by more than 40% of its desired value.
Circuit model A
Circuit model B
LED
LED
(A) Recommended circuit.
(B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
Cleaning:
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
ESD(Electrostatic Discharge):
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
Page 15/15
Similar pages