ETC2 FSA150018A 150 w ite open frame power supply Datasheet

FSA150 — ICCNexergy
Page 1 of 3
FSA150 Series
150 W ITE Open Frame Power
Supply
• High Efficiency: Level V
• Up to 180W with Forced Air
• High Power Density 9.8W/in3
• Lifetime Expectation >5 years
• Hold-up Time >25ms at full load
• EISA and CEC Compliant
• Grounded Output
• Safety Approval - EN60950-1
Elpac Part
Number
Output
Voltage
Output
Current
FSA150012A
12.0V
FSA150015A
Peak
Current
Total
Regulation
Typical
Efficiency
12.5A / 15.0A PK 15.0A
±5%
91%
15.0V
10.0A / 12.0A PK 12.0A
±5%
91%
FSA150018A
18.0V
8.3A / 10.0A PK
10.0A
±5%
91%
FSA150024A
24.0V
6.3A / 7.5A PK
7.5A
±5%
92%
Input
Input Voltage
85 - 264VAC 100 - 240VAC Nominal
Input Frequency
47 - 63Hz
Input Current
<2A rms
Inrush Current
<37A at 230VAC cold start
Power Factor
>0.97
Zero Load Power Consumption
<0.5W
Touch Leakage Current
<150µA @ 132VAC @ 60Hz
<300µA @ 264VAC @ 60Hz
Output
http://iccnexergy.com/elpac/ite-power-supplies/open-frame/fsa150/
5/27/2011
FSA150 — ICCNexergy
Page 2 of 3
Output Voltage
See Table
Total Regulation
+/-5%
Minimum Load
No minimum load required
Start-Up Delay
<1.5s
Hold-Up Time
>25ms at any input voltage
Ripple & Noise
<1% pk-pk **
Over Voltage Protection
110-135%
Over Temperature Protection
Active - Recoverable; plus Passive - Non Recoverable
Over Current Protetion
120 - 180%
Short Circuit Protection
shutdown, auto-restart (hiccup mode)
General
Efficiency
Avg Efficiency 91.7% @ 115VAC; 93.4% @ 230VAC
MTBF
min. 200,000 hours demonstrated
Size
5.00
Weight
0.75 lbs (.34 kg)
Power Density
9.8W/in3
Environmental
Operating Temperature 0 – 70°C (Full load to 50°C, derate linearly to 50% load at 70°C)
Storage Temperature
-40°C to +85°C
Relative Humidity
5-95%, non-condensing
Cooling
Natural Convection (150W) or Forced Air (180W)
Vibration
All units production tested to 19.6m/s2
EMC & Safety
Emissions
FCC class B, CISPR22 class B EN61000-3-2, -3
Immunity
EN61000-4-2, -3, -4, -5, -6, -8, -11
Certified by TUV to the following:
cTUVus
http://iccnexergy.com/elpac/ite-power-supplies/open-frame/fsa150/
5/27/2011
FSA150 — ICCNexergy
Page 3 of 3
UL 60950-1
CAN/CSA-22.2 No.60950-1
CB per IEC60950-1
CE marked to LVD
FSA150 | ICCNEXERGY | © 2011 |
http://iccnexergy.com/elpac/ite-power-supplies/open-frame/fsa150/
5/27/2011
Similar pages