NF Connectors pages Right Angle, Solder Dip 54-55 Latch Header (1.27mm) Straight, Solder Dip 56-57 Latch Header (1.27mm) Straight, Solder Dip 58-59 Box Header (1.27mm) Right Angle, Solder Dip 60-61 Box Header (1.27mm) Straight, Solder Dip 62-63 IDC Connectors (1.27mm) Transition Header 64-65 IDC Connectors (1.27mm) IDC Receptacle 66-67 Board to Board Recep. (1.27mm) Through Hole 68-69 NF Connectors Latch Header (1.27mm) 53 Latch Header (1.27mm, Right Angle, Solder Dip) NFP SERIES ORDERING INFORMATION NFP- *** A-01 * 2- * -** Header Series No. of Positions Characteristics Current Rating: Insulation Resistance: Withstanding Voltage: Contact Resistance: Operating Temperature: Material and Finish Standard Header Insulator: Contact: Plating: 1: Short Latch 2: Long Latch Terminal Type: 2: Right Angle Solder Dip High Temp Thermoplastic-UL94V-0 Copper Alloy Mating Face Contacts: Au over Ni Terminals: Au or SnPb over Ni Features 1. 2. 3. 4. 5. 6. Blank: 2.7 mm Terminal 1: 4.6 mm Terminal Plating (see below) TYPES OF PLATING CONNECTOR DIMENSIONS (reference only) ❑ Short Latch Positions 50, 60, 64, 80,100 available in long terminals † Long Latch Positions 40, 64, 80, 100 available in long terminals 54 0.5A 1,000M½ Minimum at 500 VDC 500 VAC for 1 minute 15m½ Max. at 10mA -20˚C ~ +85˚C Right-angle terminals Short or long latches Long terminal available Variety of plating options Latches eject receptacle Central polarizing key Latch Header (1.27mm, Right Angle, Solder Dip) NFP SERIES APPLICABLE DIMENSIONS (reference only) Connector Outline Dimensions Contact Detail Y= 2.7 (Short terminal length) 4.6 (Long terminal length) NF Connectors X= 6.5 (Short latch type) 4.0 (Long latch type) PCB Layout Section A Section B 10, 26, 34, 50 Contacts Note: Left half of this PCB layout is identical to Section A 16, 20, 40, 60, 64, 80, 100 Contacts 55 Latch Header (1.27mm, Straight, Solder Dip) NFP SERIES ORDERING INFORMATION NFP- *** A-01 * 4- * -** Header Series No. of Positions Characteristics Current Rating: Insulation Resistance: Withstanding Voltage: Contact Resistance: Operating Temperature: Material and Finish Standard Header Insulator: Contact: Plating: 1: Short Latch 2: Long Latch Terminal Type: 4: Straight Solder Dip High Temp Thermoplastic-UL94V-0 Copper Alloy Mating Face Contacts: Au over Ni Terminals: Au or SnPb over Ni Features 1. 2. 3. 4. 5. 6. 7. Blank: 2.7 mm Terminal 1: 4.6 mm Terminal Plating (see below) TYPES OF PLATING CONNECTOR DIMENSIONS (reference only) ❑ Short Latch Positions 26, 34, 40, 50, 80,100 available in long terminals † Long latch Positions 60, 80,100 available in long terminals 56 0.5A 1,000M½ Minimum at 500 VDC 500 VAC for 1 minute 15m½ Max. at 10mA -20˚C ~ +85˚C Straight terminals Short or long latches Long terminal available Variety of plating options Spring pin for secure mount Latches eject receptacle Central polarizing key Latch Header (1.27mm, Straight, Solder Dip) NFP SERIES APPLICABLE DIMENSIONS (reference only) Connector Outline Dimensions Contact Detail NF Connectors X= 6.5 (Short latch type) 4.0 (Long latch type) Y= 2.7 (Short terminal length) 4.6 (Long terminal length) PCB Layout Section A Section B 10, 26, 34, 50 Contacts Note: Left half of this PCB layout is identical to Section A 16, 20, 40, 60, 64, 80, 100 Contacts 57 Latch Header (1.27mm, Straight Solder Dip) NFP SERIES ORDERING INFORMATION NFP- *** A-03 * 4- * -** Header Series No. of Positions Characteristics Current Rating: Insulation Resistance: Withstanding Voltage: Contact Resistance: Operating Temperature: Material and Finish Without Spring Pin Mount Insulator: Contact: Plating: 1: Short Latch 2: Long Latch Terminal Type: 4: Straight Solder Dip High Temp Thermoplastic-UL94V-0 Copper Alloy Mating Face Contacts: Au over Ni Terminals: Au or SnPb over Ni Features 1. 2. 3. 4. 5. 6. Blank: 2.7 mm Terminal 1: 4.6 mm Terminal Plating (see below) TYPES OF PLATING CONNECTOR DIMENSIONS (reference only) ❑ Short Latch Positions 10, 50, 60, 80,100 available in long terminals † Long Latch Positions 60, 80, 100 available in long terminals 58 0.5A 1,000M½ Minimum at 500 VDC 500 VAC for 1 minute 15m½ Max. at 10mA -20˚C ~ +85˚C Straight terminals Short or long latches Variety of plating options Long terminal available Latches eject receptacle Central polarizing key Latch Header (1.27mm, Straight Dip) NFP SERIES APPLICABLE DIMENSIONS (reference only) Connector Outline Dimensions Contact Detail NF Connectors X= 6.5 (Short latch type) 4.0 (Long latch type) Y= 2.7 (Short terminal length) 4.6 (Long terminal length) PCB Layout 10, 26, 34, 50 Contacts 16, 20, 40, 60, 64, 80, 100 Contacts 59 Box Header (1.27mm, Right Angle, Solder Dip) NFP SERIES ORDERING INFORMATION NFP- ** A-013 2- ** Header Series No. of Positions Characteristics Current Rating: Insulation Resistance: Withstanding Voltage: Contact Resistance: Operating Temperature: 0.5A 1,000M½ Minimum at 500 VDC 500 VAC for 1 minute 15m½ Max. at 10mA -20˚C ~ +85˚C Material and Finish Box Header Terminal Type: 2: Right Angle Solder Dip Insulator: Contact: Plating: Plating (see below) Features High Temp Thermoplastic-UL94V-0 Copper Alloy Mating Face Contacts: Au over Ni Terminals: Au or SnPb over Ni 1. Right-angle terminals 2. Variety of plating options 3. Central polarizing key TYPES OF PLATING CONNECTOR DIMENSIONS 60 (reference only) Box Header (1.27mm, Right Angle, Solder Dip) NFP SERIES APPLICABLE DIMENSIONS (reference only) Connector Outline Dimensions Contact Detail NF Connectors PCB Layout Section A Section B 26, 34, 50 Contacts 16, 20, 40, 60, 80 Contacts Note: Left half of this PCB layout is identical to Section A 61 Box Header (1.27 mm, Straight Solder Dip) NFP SERIES ORDERING INFORMATION NFP- ** A-013 4- ** Header Series No. of Positions Characteristics Current Rating: Insulation Resistance: Withstanding Voltage: Contact Resistance: Operating Temperature: 0.5A 1,000M½ Minimum at 500 VDC 500 VAC for 1 minute 15m½ Max. at 10mA -20˚C ~ +85˚C Material and Finish Box Header Terminal Type: 4: Straight Solder Dip Insulator: Contact: Plating: Plating (see below) Features High Temp Thermoplastic-UL94V-0 Copper Alloy Mating Face Contacts: Au over Ni Terminals: Au or SnPb over Ni 1. Straight terminals 2. Variety of plating options 3. Central polarizing key TYPES OF PLATING CONNECTOR DIMENSIONS 62 (reference only) Box Header (1.27mm, Straight Solder Dip) NFP SERIES APPLICABLE DIMENSIONS (reference only) Connector Outline Dimensions Contact Detail NF Connectors PCB Layout Section B Section A 26, 34, 50 Contacts 16, 20, 40, 60, 80 Contacts Note: Left half of this PCB layout is identical to Section A 63 IDC Transition Header (1.27 mm) NFP SERIES ORDERING INFORMATION NFP- *** G- 0100- ** Header Series No. of Positions Characteristics Current Rating: Insulation Resistance: Withstanding Voltage: Contact Resistance: Operating Temperature: 1A 1,000M½ Minimum at 500 VDC 500 VAC for 1 minute 15m½ Max. at 10mA -20˚C ~ +85˚C Material and Finish Transition Header Insulator: Contact: Plating: 3.3mm Terminal Length Plating (see below) High Temp Thermoplastic-UL94V-0 Copper Alloy Mating Face Contacts: Au over Ni Terminals: Au or SnPb over Ni Features 1. Unique three-fork IDC contact allows termination of 0.635mm pitch flat cable 2. Various plating options APPLICABLE CABLES • Solid Wire AWG 30 • Stranded Wire AWG 30 • Cable Spacing (0.635mm) TYPES OF PLATING CONNECTOR DIMENSIONS 64 (reference only) IDC Transition Header (1.27mm) NFP SERIES APPLICABLE DIMENSIONS (reference only) Connector Outline Dimensions NF Connectors Contact Detail PCB Layout 65 IDC Receptacle (1.27 mm) NFS SERIES Receptacle ORDERING INFORMATION Strain Relief NFS- *** A-011 * - ** Socket Series No. of Positions Characteristics Current Rating: Insulation Resistance: Withstanding Voltage: Contact Resistance: Operating Temperature: 1A 1,000M½ Minimum at 500 VDC 500 VAC for 1 minute 15m½ Max. at 10mA -20˚C ~ +85˚C Material and Finish Standard Socket Insulator: Contact: Plating: 1: With polarity Key 0: Without Strain Relief 1: With Strain Relief Accessories High Temp Thermoplastic-UL94V-0 Copper Alloy Mating Face Contacts: Au over Ni Terminals: Au or SnPb over Ni Strain Reliefs (see page 86) Features Plating (see below) 1. IDC contact allows termination of 0.635mm pitch flat cable 2. Strain relief available to prevent kinking and caving 3. Plating options available 4. Central polarizing key APPLICABLE CABLES • Solid Wire AWG 30 • Stranded Wire AWG 30 • Cable Spacing (0.635mm) TYPES OF PLATING CONNECTOR DIMENSIONS 66 (reference only) IDC Receptacle (1.27mm) NFS SERIES APPLICABLE DIMENSIONS (reference only) Connector Outline Dimensions NF Connectors Contact Detail 67 Board to Board Receptacle (1.27 mm) NFS SERIES ORDERING INFORMATION NFS- ** A-131 4- ** Socket Series No. of Positions Characteristics Current Rating: Insulation Resistance: Withstanding Voltage: Contact Resistance: Operating Temperature: 1A 1,000M½ Minimum at 500 VDC 500 VAC for 1 minute 15m½ Max. at 10mA -20˚C ~ +85˚C Material and Finish With Polarity Key Terminal Type: 4: Straight Solder Dip Insulator: Contact: Plating: Plating (see below) Features High Temp Thermoplastic-UL94V-0 Copper Alloy Mating Face Contacts: Au over Ni Terminals: Au or SnPb over Ni 1. Straight terminals 2. Terminal length (2.7mm) TYPES OF PLATING CONNECTOR DIMENSIONS 68 (reference only) Board to Board Receptacle (1.27mm) NFS SERIES APPLICABLE DIMENSIONS (reference only) Connector Outline Dimensions NF Connectors Contact Detail PCB Layout 69