ETC2 D8G0217N 2 5/16 diameter 2.25 amps 28 vdc Datasheet

D8 - SERIES
2 5/16" DIAMETER
SPECIFICATIONS AND ORDERING INFORMATION
2.25 AMPS @ 28 VDC
The D8 Series switches are heavy duty, 18 position, 20° index, and glass
epoxy insulation. Double eyelet construction is standard to assist in
supporting larger wiring harness applications. Positive indexing is provided
by a dual-ball, hill and valley index assembly.
SPECIFICATIONS
ELECTRICAL
MECHANICAL
Current and Voltage Rating: Make and break resistive load
2.25 amps @ 28 VDC; 1.0 amp @ 115 VAC.
Current Carrying Capacity: 9 amps.
Dielectric Strength: 1,000 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 5 milliohms.
Insulation Resistance: In excess of 750,000 megohms.
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Clips and Rotors: Brass with silver plate as standard.
Insulation: Glass epoxy.
Index: Dual-ball, hill and valley.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 20° standard.
Index Stops: Adjustable standard, fixed or continuous.
Stop Strength: 25 in. lbs. minimum.
Hardware: Mounting nut and lockwasher are shipped assembled.
D
STANDARD PART NUMBER
GLASS EPOXY INSULATION
SWITCHES - 20° INDEXING
ADJUSTABLE STOPS SET @ 2 POS. - SOLDER LUG TERMINALS
ACTIVE
POLES/
POLES POSITIONS SECTION
01
02
03
04
05
06
07
08
02-17
02-17
02-17
02-17
02-17
02-17
02-17
02-17
NO. OF SHORTING
NONSECTIONS
SHORTING
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
D8G0117S
D8G0217S
D8G0317S
D8G0417S
D8G0517S
D8G0617S
D8G0717S
D8G0817S
D8G0117N
D8G0217N
D8G0317N
D8G0417N
D8G0517N
D8G0617N
D8G0717N
D8G0817N
FIG.
*
DT
DT
DT
DT
DT
DT
DT
DT
* FIGURES ARE SHOWN ON PAGE 57.
DIMENSIONS
STANDARD CONSTRUCTION
D8G - GLASS EPOXY
CONSTRUCTION
• ELECTRONIC PRODUCTS
UNIT OF ELECTRO SWITCH CORP.
32
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
ADDITIONAL OPTIONS AND ORDERING INFORMATION
D8 - SERIES
How to Order Additional Options:
2 DIGIT
SERIES
INSULATION
TYPE
D8
G - GLASS
TOTAL
POLES
ACTIVE
POSITIONS
01 - MIN.
18 - MAX @ 20°
CONTACT
TYPE
TERMINAL
TYPE
N - NON
SHORTING
S - SHORTING
8
STOP
TYPE
SHAFT/
BUSHING
SHAFT
FLAT
SEE
CHART
“A”
SEE
CHART
“B”
(SPECIFY) (SPECIFY)
(SPECIFY)
A - ADJ.
F - FIXED
C - CONT.
CUSTOMERS SPECIFIED ORDER NUMBER FOR STANDARD OPTIONS
D
INDEX
ANGLE
ADDITIONAL OPTIONS
G
(SPECIFY)
(SPECIFY)
(SPECIFY)
SHAFT, BUSHING, AND FLAT OPTIONS
D
SHAFT AS VIEWED
WITH NON-TURN LUG
AT 9 O'CLOCK AND
SHAFT IN EXTREME
CCW POSITION AND
STRUT BOLTS
ORIENTED VERTICALLY.
U
W
Y
Z
CUSTOM SWITCHES ARE AVAILABLE. CONTACT THE FACTORY WITH YOUR COMPLETE SPECIFICATIONS.
• ELECTRONIC PRODUCTS
UNIT OF ELECTRO SWITCH CORP.
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
33
Similar pages