CT Micro H11L1SLT1 Schmitt trigger output 6-pin optocoupler Datasheet

H11L1, H11L2, H11L3
Schmitt Trigger Output 6-Pin Optocoupler
Features
•
High isolation 5000 VRMS
•
DC input with Schmitt Trigger output
•
1MHz(NRZ) data rate
•
Temperature range - 55 °C to 100 °C
Description
The H11L1, H11L2 and H11L3 series consist of a
Schmitt Trigger optically coupled to a gallium
arsenide Infrared-emitting diode in a 6-lead DIP
package with different lead forming options.
Applications
•
Line Receiver
•
Logic to Logic Isolator
•
Microprocessor system interface
•
AC to TTL conversion
Package Outline
Schematic
Note: Different lead forming options available. See package
dimension.
CT Micro
Proprietary & Confidential
Page 1
Rev 1
Mar, 2014
H11L1, H11L2, H11L3
Schmitt Trigger Output 6-Pin Optocoupler
Absolute Maximum Rating at 25oC
Symbol
Parameters
Ratings
Units
5000
VRMS
VISO
Isolation voltage
TOPR
Operating temperature
-55 ~ +100
oC
TSTG
Storage temperature
-55 ~ +150
o
C
TSOL
Soldering temperature
260
o
C
Forward current
60
mA
1
A
6
V
Notes
Emitter
IF
IF(TRANS)
Peak transient current
(≤1µs P.W,300pps)
VR
Reverse voltage
PD
Power dissipation
100
mW
PD
Power dissipation
150
mW
Vo
Output Voltage
0 to 16
V
3 to 16
V
50
mA
Detector
Vcc
Io
Supply Voltage
Output Current
CT Micro
Proprietary & Confidential
Page 2
Rev 1
Mar, 2014
H11L1, H11L2, H11L3
Schmitt Trigger Output 6-Pin Optocoupler
Electrical Characteristics T
A
= 25°C (unless otherwise specified)
Emitter Characteristics
Symbol
Parameters
Test Conditions
Min
Typ
Max
Units
1.24
1.4
V
VF
Forward voltage
IF=10mA
IR
Reverse Current
VR = 6V
-
-
5
µA
Input Capacitance
f= 1MHz
-
45
-
pF
Min
Typ
Max
Units
3
-
15
V
1.5
5
mA
100
µA
Typ
Max
Units
1.5
5
mA
1.6
mA
10
mA
5
mA
CIN
Notes
Detector Characteristics
Symbol
Parameters
Test Conditions
VCC
Supply Voltage
ICCH
Logic High Supply Current
IF= 0mA, VCC= 5V
IOH
Logic High Output Current
IF= 0mA, VCC=VO=15V
Notes
Transfer Characteristics
Symbol
ICCL
Parameters
Logic Low Supply Current
Test Conditions
Min
IF= 10mA, VCC= 5V
H11L1
IF(ON)
Input Threshold
H11L2
VCC= 5V, RL= 270 Ω
Current
H11L3
IF(OFF)
IF(ON)/
IF(OFF)
Notes
Off Threshold Current
VCC= 5V, RL= 270 Ω
Hysteresis Ratio
0.3
1
0.5
mA
0.9
IF= IF(ON) Max, VCC= 5V,
VOL
Logic Low Output Voltage
RIO
Isolation Resistance
VIO= 500VDC
CIO
Isolation Capacitance
f= 1MHz
0.4
V
RL= 270 Ω
1x1011
Ω
0.25
pF
Switching Characteristics
Symbol
tON
tr
Parameters
Test Conditions
Min
Typ
Max
-
-
3.8
-
0.1
-
Turn Off Time
-
-
3.8
Fall Time
-
0.1
-
Data Rate
-
1
-
Turn On Time
Rise Time
IF= IF(ON), VCC= 5V, RL= 270Ω
tOFF
tf
CT Micro
Proprietary & Confidential
Page 3
Units
Notes
µs
MHz
Rev 1
Mar, 2014
H11L1, H11L2, H11L3
Schmitt Trigger Output 6-Pin Optocoupler
Typical Characteristic Curves
CT Micro
Proprietary & Confidential
Page 4
Rev 1
Mar, 2014
H11L1, H11L2, H11L3
Schmitt Trigger Output 6-Pin Optocoupler
Package Dimension Dimensions in mm unless otherwise stated
Standard DIP – Through Hole
Wide Lead Forming – Through Hole (M Type)
CT Micro
Proprietary & Confidential
Page 5
Rev 1
Mar, 2014
H11L1, H11L2, H11L3
Schmitt Trigger Output 6-Pin Optocoupler
Surface Mount Forming (S Type)
Surface Mount Forming (Low Profile) (SL Type)
CT Micro
Proprietary & Confidential
Page 6
Rev 1
Mar, 2014
H11L1, H11L2, H11L3
Schmitt Trigger Output 6-Pin Optocoupler
Recommended Solder Mask Dimensions in mm unless otherwise stated
Marking Information
CT
H11L1
YWWK
Note:
CT
H11L1
: Denotes “CT Micro”
: Part Number
Y
WW
K
: Fiscal Year
: Work Week
: Manufacturing Code
CT Micro
Proprietary & Confidential
Page 7
Rev 1
Mar, 2014
H11L1, H11L2, H11L3
Schmitt Trigger Output 6-Pin Optocoupler
Ordering Information
H11LX(Y)(Z)-G
X = Part No. (X=1,2,3)
Y = Lead form option (S, SL, M or none)
Z = Tape and reel option (T1, T2 or none)
G= Material option (G: Green, None: Non-green)
Option
Description
Quantity
None
Standard 6 Pin Dip
65Units/Tube
M
Gullwing (400mil) Lead Forming
65Units/Tube
S(T1)
Surface Mount Lead Forming – With Option 1 Taping
1000 Units/Reel
S(T2)
Surface Mount Lead Forming – With Option 2 Taping
1000 Units/Reel
SL(T1)
Surface Mount (Low Profile) Lead Forming– With Option 1 Taping
1000 Units/Reel
SL(T2)
Surface Mount (Low Profile) Lead Forming – With Option 2 Taping
1000 Units/Reel
CT Micro
Proprietary & Confidential
Page 8
Rev 1
Mar, 2014
H11L1, H11L2, H11L3
Schmitt Trigger Output 6-Pin Optocoupler
Carrier Tape Specifications Dimensions in mm unless otherwise stated
Option S(T1) & SL(T1)
Option S(T2) & SL(T2)
CT Micro
Proprietary & Confidential
Page 9
Rev 1
Mar, 2014
H11L1, H11L2, H11L3
Schmitt Trigger Output 6-Pin Optocoupler
Reflow Profile
Profile Feature
Pb-Free Assembly Profile
Temperature Min. (Tsmin)
150°C
Temperature Max. (Tsmax)
200°C
Time (ts) from (Tsmin to Tsmax)
60-120 seconds
Ramp-up Rate (tL to tP)
3°C/second max.
Liquidous Temperature (TL)
217°C
Time (tL) Maintained Above (TL)
60 – 150 seconds
Peak Body Package Temperature
260°C +0°C / -5°C
Time (tP) within 5°C of 260°C
30 seconds
Ramp-down Rate (TP to TL)
6°C/second max
Time 25°C to Peak Temperature
8 minutes max.
CT Micro
Proprietary & Confidential
Page 10
Rev 1
Mar, 2014
H11L1, H11L2, H11L3
Schmitt Trigger Output 6-Pin Optocoupler
DISCLAIMER
CT MICRO RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. CT MICRO DOES NOT ASSUME ANY LIABILITY
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
______________________________________________________________________________________
DISCOLORATION MIGHT OCCUR ON THE PACKAGE SURFACE AFTER SOLDERING, REFLOW OR LONG
TERM USE. THIS DOES NOT IMPACT THE PRODUCT PERFORMANCE NOR THE PRODUCT RELIABILITY.
CT MICRO ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF CT MICRO INTERNATIONAL CORPORATION.
1. Life support devices or systems are devices or
2. A critical component is any component of a life
systems which, (a) are intended for surgical
support device or system whose failure to perform
implant into the body, or (b) support or sustain life,
can be reasonably expected to cause the failure of
or (c) whose failure to perform when properly used
the life support device or system, or to affect its
in accordance with instruction for use provided in
safety or effectiveness.
the labelling, can be reasonably expected to result
in significant injury to the user.
CT Micro
Proprietary & Confidential
Page 11
Rev 1
Mar, 2014
Similar pages