LH1 thru LH7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 1A Features • • • • • • • Glass passivated High Efficiency rectifiers Ideal for automated placement L Low fforward d voltage lt d drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified Low profile， typical thickness 1.0mm eSGB (SMAF) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol LH1 LH2 LH3 LH4 LH5 LH6 LH7 Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage Maximum DC blocking voltage VRMS VDC 35 50 70 100 140 200 280 400 420 600 560 800 700 1000 V V Maximum average forward rectified current IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A TJ, TSTG - 55 to + 150 °C Operating junction and storage temperature range Electrical Characteristics Parameter Maximum instantaneous forward Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time Typical junction capacitance Typical thermal resistance1) Test Conditions Symbol 1A (TA = 25 °C unless otherwise noted) LH1 LH2 LH3 LH5 1.3 VF TA=25℃ TA=125℃ LH4 LH6 1.7 LH7 Unit Volts 5 IR µA 50 IF=0.5A,IR=1.0A, Irr=0.25A trr 4.0 V, 1 MHz CJ 15 pF RθJM 18 ℃/W juntion to mount 50 75 nS Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 8×8mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2014.03-Rev.A LH1 thru LH7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 1A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1.Forward Current Derating Curve Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 3. Typical Reverse Characteristics Figure 4. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 2014.03-Rev.A LH1 thru LH7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 1A Package Outline Dimensions DIM Unit: mm Unit: inch MIN MAX MIN MAX A 0.92 1.08 0.036 0.043 A1 0 0.1 0.000 0.004 B 1.25 1.45 0.049 0.057 C 0.1 0.25 0.004 0.010 D 2.6 2.8 0.102 0.110 E 4.1 4.3 0.161 0.169 L 07 0.7 11 1.1 0 028 0.028 0 043 0.043 HE 4.8 5.2 0.189 0.205 Soldering footprint(unit:mm) Packing Information Packing quantities: Reel size 7" 13" Quantity/reel 3K 10K Quantity/inner Box 21K 20K Quantity/Carton 84K 180K Tape & Reel Specification www.goodark.com 3/4 2014.03-Rev.A LH1 thru LH7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, rights or any other rights, rights belonging to Suzhou Good-Ark Good Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may ma contain technical inaccuracies inacc racies or typographical t pographical errors. errors Suzhou S ho Good-Ark Good Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce d in i whole h l or in i partt these th materials. t i l Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.03-Rev.A