Panasonic EEHZK1V331V Conductive polymer hybrid aluminum electrolytic capacitor Datasheet

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Surface Mount Type
Series :
ZK Type : V
High temperature Lead-Free reflow
Features
● High capacitance and High ripple current compared with ZC series
● Endurance : 4000 h at 125 °C (High temperature / Long life)
● Low ESR (85 % over, Lower ESR than Current V-TP), Low LC (0.01 CV or
● Equivalent to conductive polymer type Aluminum Electrolytic Capacitor
3 μF)
(There are little characteristics change by temperature and frequency)
available upon request. (08 mm and larger)
● Vibration-proof product is
● AEC-Q200 compliant
● RoHS directive compliant
Specifications
Size code
Category temp. range
Rated voltage range
Nominal cap.range
Capacitance tolerance
DC leakage current
Dissipation factor (tan d)
Endurance
Shelf life
Damp heat (Load)
Resistance to
soldering heat
C
D
33 μF to 47 μF
56 μF to 68 μF
D8
F
–55 °C to +125 °C
25 V.DC to 35 V.DC
100 μF to 150 μF 180 μF to 270 μF
G
330 μF to 470 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater)
Please see the attached standard products list
125 °C, 4000 h, apply the rated ripple current without exceeding the rated voltage
Capacitance change
Within ±30% of the initial value
tan d
< 200 % of the initial limit
E. S. R.
< 200 % of the initial limit
DC leakage current Within the initial limit
Size code
ESR after Endurance
C
D
D8
F
G
(Ω/100 kHz) (–40 °C)
2.0
1.4
0.8
0.4
0.3
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
85 °C, 85 % to 90 %, 2000 h, rated voltage applied
Capacitance change Within ±30 % of the initial value
tan d
< 200 % of the initial limit
E. S. R.
< 200 % of the initial limit
DC leakage current Within the initial limit
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10% of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
0.3 max.
Series identification
L
Pressure relief (010 and larger)
(P)
+
(I)
Capacitance (μF)
H
Negative polarity marking (–)
47
E ZK
A±0.2
–
K
Marking color : BLACK
0D±0.5
Example : 25 V.DC 47 μF
(I)
Dimensions (not to scale)
B±0.2
Marking
W
( ) Reference size
(Unit : mm)
Rated voltage mark
Lot number
Rated voltage mark
E
V
25 V.DC
35 V.DC
Size
code
D
L
A, B
C
5.0 5.8±0.3 5.3
D
6.3 5.8±0.3 6.6
D8 6.3 7.7±0.3 6.6
F
8.0 10.2±0.3 8.3
G 10.0 10.2±0.3 10.3
H
I
W
P
K
6.5 max.
7.8 max.
7.8 max.
10.0 max.
12.0 max.
2.2
2.6
2.6
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.5
1.8
1.8
3.1
4.6
0.15
0.35 +- 0.20
+ 0.15
0.35 - 0.20
0.15
0.35 +- 0.20
0.70±0.2
0.70±0.2
· The dimensions of the vibration-proof products, please refer to the page of
the mounting specification.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Nov. 2016
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Standard products
Endurance : 125 °C 4000 h
Case size
(mm)
Rated Capacitance
voltage (±20 %)
(V.DC)
(μF)
25
35
fD
L
Specification
Size
code
Ripple
E.S.R.
tan d
current
Standard
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
Product
(+20 °C)
(+125 °C)
(mΩ)
(mA r.m.s.)
660
80
0.14
EEHZK1E470R
47
5
5.8
C
68
6.3
5.8
D
1080
50
Min.
packaging q'ty
Part number
0.14
EEHZK1E680P
Vibration-proof
product
Taping
(pcs)
–
1000
–
1000
–
900
150
6.3
7.7
D8
1680
30
0.14
EEHZK1E151XP
270
8
10.2
F
1920
27
0.14
EEHZK1E271P
EEHZK1E271V
470
10
10.2
G
2800
20
0.14
EEHZK1E471P
EEHZK1E471V
33
5
5.8
C
660
100
0.12
EEHZK1V330R
–
1000
56
6.3
5.8
D
1080
60
0.12
EEHZK1V560P
–
1000
100
6.3
7.7
D8
1680
35
0.12
EEHZK1V101XP
–
900
180
8
10.2
F
1920
27
0.12
EEHZK1V181P
EEHZK1V181V
500
330
10
10.2
G
2800
20
0.12
EEHZK1V331P
EEHZK1V331V
500
500
500
· Please refer to the page of “Reflow profile” and “The taping dimensions”.
Frequency correction factor for ripple current
Rated capacitance
C < 47 μF
47 μF < C < 150 μF
150 μF < C
Frequency
Rated capacitance
C < 47 μF
47 μF < C < 150 μF
150 μF < C
Frequency
Rated capacitance
C < 47 μF
47 μF < C < 150 μF
150 μF < C
Frequency
Rated capacitance
C < 47 μF
47 μF < C < 150 μF
150 μF < C
Frequency
Correction
factor
Correction
factor
Correction
factor
Correction
factor
100 Hz < f < 200 Hz 200 Hz < f < 300 Hz 300 Hz < f < 500 Hz
0.10
0.10
0.15
0.15
0.20
0.25
0.15
0.25
0.25
1 kHz < f < 2 kHz
0.30
0.40
0.45
10 kHz < f < 15 kHz
0.60
0.70
0.75
2 kHz < f < 3 kHz
0.40
0.45
0.50
3 kHz < f < 5 kHz
0.45
0.55
0.60
500 Hz < f < 1 kHz
0.20
0.30
0.30
5 kHz < f < 10 kHz
0.50
0.60
0.65
15 kHz < f < 20 kHz 20 kHz < f < 30 kHz 30 kHz < f < 40 kHz
0.65
0.70
0.75
0.75
0.80
0.80
0.80
0.85
0.85
40 kHz < f < 50 kHz 50 kHz < f < 100 kHz 100 kHz < f < 500 kHz
0.80
0.85
1.00
0.85
0.90
1.00
0.85
0.90
1.00
500 kHz < f
1.05
1.00
1.00
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Nov. 2016
Similar pages