ITF F4602 Rf bandpass filter Datasheet

SAW Bandpass Filter F4602
Features
RF bandpass filter
High attenuation
No matching 50Ω single-ended operation
Ceramic Surface Mounted Device (SMD) Package
RoHS Compliant
Package Dimensions
3.80± 0.15
1.00± 0.15
1.50± 0.10
8
3.80± 0.15
1
2
8
7
ITF
4602
3
0.60± 0.10
6
5
1.00± 0.10
7
1
6
2
5
3
4
1.27± 0.10
4
1.40± 0.15
Dimensions shown are nominal in millimeters
Pin Configurations
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
2
Input
6
Output
1, 3, 4, 5, 7, 8
Case ground
Maximum Ratings
Parameter
Unit
Minimum
Typical
Maximum
Operating Temperature Range
°C
-30
25
60
Storage Temperature Range
°C
-40
25
85
Power Handling Capability
dBm
-
-
10
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4602
Rev. Date
2012-09-12
Rev.
NSNI01-AS01
1/7
SAW Bandpass Filter F4602
Specifications
Fc = 460 MHz
Minimum
Typical
Maximum
Unit
Center Frequency ( Fc )
-
460
-
MHz
Insertion Loss (450 ~ 470 MHz)
-
2.6
3.2
dB
Amplitude Ripple (450 ~ 470 MHz)
-
1.2
2.4
dBp-p
Return Loss (450 ~ 470 MHz)
7
8.2
-
dB
0.3 ~ 300 MHz
30
58
-
300 ~ 380 MHz
24
56
-
380 ~ 430 MHz
15
54
-
504.825 ~ 524.825 MHz
12
44
-
559.65 ~ 579.65 MHz
28
56
-
669.3 ~ 689.3 MHz
24
54
-
689.3 ~ 1000 MHz
26
44
-
Temperature Coefficient of Frequency
-
-36
-
ppm/℃
Input/Output Impedance
-
50
-
Ohms
Relative Attenuation
dB
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4602
Rev. Date
2012-09-12
Rev.
NSNI01-AS01
2/7
SAW Bandpass Filter F4602
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
ITF 1)
46022)
1) Manufacturer name
2) Marking Number
* Ink or Laser Marking available
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4602
Rev. Date
2012-09-12
Rev.
NSNI01-AS01
3/7
SAW Bandpass Filter F4602
Typical Performance ( at 25℃
℃ )
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4602
Rev. Date
2012-09-12
Rev.
NSNI01-AS01
4/7
SAW Bandpass Filter F4602
Input / Output VSWR Charts
Input / Output Smith Charts
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4602
Rev. Date
2012-09-12
Rev.
NSNI01-AS01
5/7
SAW Bandpass Filter F4602
Packing Specification
1. Reeling Quantity : 1000 pcs / reel
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
0~ 15 degree
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Carrier tape
Part No.
F4602
Rev. Date
2012-09-12
Rev.
NSNI01-AS01
6/7
SAW Bandpass Filter F4602
Carrier Tape Dimensions [unit : mm]
A
4.30 ± 0.1
B
4.30 ± 0.1
C
7.25 ± 0.1
D
1.70 ± 0.1
E
12.00 ± 0.1
F
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4602
Rev. Date
2012-09-12
Rev.
NSNI01-AS01
7/7
Similar pages