ETC2 LED40W-009-C4450-XX-HV Switch mode led driver Datasheet

LED-40W-HV Series–
High Voltage Input, Fixed Output and Dimmable
Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
347-480 Vac Nom. (312-528 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ >60% load 347V, >80% load 480V
Inrush Current:
<30.0 Amps max @ 480Vac, full load, cold start 25ºC
Input Current:
0.14 Amps typical @ 347Vac, 60 Hz, full load
Maximum Power:
40W
Current Accuracy:
± 3% Over input line variation
Load Regulation:
± 4%
THD:
<
_ 20% @ any load, 347V/480V
Leakage Current:
600 µA Typical
Hold Up Time:
Half Cycle
Output Protection:
Over-Voltage, Over-Current, Short Circuit (Auto Recovery)
Environmental Specifications
• Total Power: 40 Watts
• Input Voltage: 347-480 Vac Nom.
• UL Dry & Damp Location Rated
• IP66 & NEMA4
• High Power Factor
Constant Current - Product Specifications
Maximum Case Temp.
90°C
Minimum Starting Temp:
-30ºC
Storage Temperature:
-40ºC to +85ºC
LED40W-130-C0300-XX-HV
300
44-130
39.0
87%
Humidity:
5% to 95%
LED40W-114-C0350-XX-HV
350
38-114
39.9
86%
Cooling:
Convection
LED40W-100-C0400-XX-HV
400
33-100
40
86%
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
LED40W-089-C0450-XX-HV
450
30-89
40
86%
LED40W-072-C0550-XX-HV
550
24-72
39.6
85%
Sound Rating:
Class A
LED40W-057-C0700-XX-HV
700
20-57
40
85%
MTBF @ 40ºC:
482,000 Hours at full load, per MIL-217F Notice 2
LED40W-048-C0830-XX-HV
830
16-48
39.8
85%
EMC:
FCC 47CFR Part 15 Class B compliant
LED40W-045-C0900-XX-HV
900
16-45
40
85%
Weight:
11 oz. (311 grams)
LED40W-040-C1000-XX-HV
1000
13-40
40
85%
LED40W-036-C1100-XX-HV
1100
12-36
39.6
85%
LED40W-030-C1400-XX-HV
1400
10-30
42
85%
LED40W-024-C1670-XX-HV
1670
8-24
40
85%
LED40W-022-C1820-XX-HV
1820
7-22
40
85%
LED40W-018-C2200-XX-HV
2200
6-18
39.6
84%
LED40W-015-C2680-XX-HV
2680
5-15
40
84%
LED40W-013-C3080-XX-HV
3080
4-13
40
84%
LED40W-012-C3330-XX-HV
3330
4-12
40
83%
LED40W-010-C4000-XX-HV
4000
3-10
40
83%
LED40W-009-C4450-XX-HV
4450
3-9
40
82%
Output Current Output Voltage Max Output
Typical
(mA ±5%)
Range (Vdc)
Power (W) Efficiency
Model Number
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Ordering Options:
-D:2-wire dimmable model dims 100% to 10%. Two extra wires included on the output side:
+Purple/-Gray. This model is offers 0-10V & Resistance dimming, compatible with most
quality 0-10V dimmers. See page 3.
-D3:3-wire dimmable model dims 100% to 10%. Three extra wires included on the output side:
Yellow/Purple/Gray. This model is suitable for potentiometer dimming. See page 3.
-PD: PWM dimmable version dims 100% to 10%. Two extra wires included on the output side:
+Purple/-Gray. This model is PWM Dimmable via a positive duty cycle, 200Hz to 1KHz,
0-10V Pulse. See page 4.
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Constant Voltage - Product Specifications
Model Number
Output Voltage
(Vdc ±5%)
Output Current
Range (mA)
Max Output
Power (W)
Max
Efficiency
LED40W-009-HV
9
1113-4450
40
80%
LED40W-010-HV
10
1000-4000
40
81%
LED40W-012-HV
12
825-3330
40
81%
LED40W-013-HV
13
770-3080
40
81%
LED40W-015-HV
15
670-2680
40
81%
LED40W-018-HV
18
550-2200
39.6
81%
LED40W-022-HV
22
455-1820
40
82%
LED40W-024-HV
24
418-1670
40
82%
LED40W-030-HV
30
350-1400
42
82%
LED40W-036-HV
36
275-1100
39.6
82%
LED40W-040-HV
40
250-1000
40
82%
LED40W-045-HV
45
225-900
40
83%
LED40W-048-HV
48
208-830
39.8
83%
LED40W-057-HV
57
175-700
40
83%
LED40W-072-HV
72
138-550
39.6
84%
LED40W-089-HV
89
113-450
40
85%
LED40W-100-HV
100
100-400
40
85%
LED40W-114-HV
114
75-350
39.9
86%
LED40W-130-HV
130
75-300
39.0
86%
Class 2:
US/Canada
Rev 8-26-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED40W-HV Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 4
Dimensions - Inches (mm)
1.18 [30.0]
1.26 [32.0]
1.89 [48.0]
0.16 [4.0]
0.2 [5.0]
0.39±0.04 [10.0±1]
5.91 Min [150 Min]
3.78 [96.0]
INPUT
White (N)
Black (L)
Tc = 90°C max
OUTPUT
Red (+)
Blue (-)
0.39 [10.0]
0.39 [10.0]
1.20 [30.5]
2.80 [71.0]
5.91 Min [150 Min]
Power Factor / Load
WIRE SPECS:
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
Dimming Leads: 22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
30%
0.95
THD / Load
25%
0.90
90%
347 Vac
480 Vac
20%
PF
THD
0.85
0.80
15%
0.75
10%
347 Vac
480 Vac
0.70
0.60
35%
60%
Load
80%
100%
0%
35%
Safety and EMC Compliance
UL/CUL
CE
FCC, 47CFR Part 15
EN 55015
EN61000-3-2
EN61000-3-3
EN61000-4-5
UL8750, CAN/CSA-C22.2 No. 250.13-12,
UL1310 & CAN/CSA-22.1 No. 223-M91 (for Class 2),
UL1012/CS-C22.2 No.107.1 (for Non-Class 2)
EN 61347-1, EN 61347-2-13
Class B
Class C, > 80% Rated Power
2kV L-N, 8/20 µsec surge protection
60%
Load
130
See website for additional information
80%
347 Vac
480 Vac
80%
70%
35%
100%
60%
80%
Normalized Output Voltage
Lifetime / Case Temperature
115
90
75
60
45
30
15
0
45
UL Conditions of Acceptability
85%
75%
5%
0.65
Typical Efficiency / Load
95%
Efficiency
1.00
0.16 [4.0]
Lifetime (kHrs)
0.39±0.04 [10.0±1]
Dimming
Purple (+)
Gray (-)
50
55
60
65
70
75
80
Case Hotspot Temperature (°C)
85
90
Note:
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
100%
LED40W-HV Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 4
“-D” and “-D3” Option: 0-10VDC and Resistance Dimming
Parameters
Minimum
Typical
Maximum
0 mA
-2.0 V
——-
2 mA
+15 V
Source Current out of 0-10V Purple Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
“-D” Typical Dimming Circuit
“-D3” 3-Wire Dimming Circuit
10V Output
(Yellow)
Dim (+) Purple
LED40W-xxx-Cxxxx-HV-D
IP710
Wall Dimmer
LED40W-xxx-Cxxxx-HV-D3
Dim (-) Gray
0-10V Input
(Purple)
Return (Gray)
20K
Potentiometer
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Control Voltage
Output Current %
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
7V
Purple-to-Gray Voltage (Vdc)
8V
9V
10V
Notes:
1.
2.
3.
4.
D dimmable version comes with an extra two wires on the output side: +Purple/-Gray.
Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent.
D & D3 dimmable versions are not intended to dim below about 5% @ 0V or 10% @ 1.0V.
Output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED40W-HV Series
SSL Solutions Faster Than The Speed Of Light®
Pg 4 of 4
“-PD” Option: PWM Dimming
Parameters
Absolute Maximum Voltage Range on PWM Input (Purple Wire)
Input LOW Level Voltage Range (Purple Wire)
Input HIGH Level Voltage Range (Purple Wire)
Sink Current into PWM Input (Purple Wire)
Source Current out of PWM Input (Purple Wire)
PWM Input Signal Frequency
PWM Input Signal Positive Duty Cycle
Minimum
Typical
Maximum
-2.0V
-2.0V
+9.0V
0mA
0mA
500Hz
0%
10V
0V
10V
———10-90%
+15V
+5.5V
+15V
1.2mA
2mA
1500Hz
100%
“-PD” PWM Positive Dimming Typical Circuit
PWM (+) Purple
LED40W-XX-CXXXX-HV-PD
PWM In
PWM (-) Gray
Output Current / 1.0kHz Positive Duty Cycle
Output Current %
100
90
80
70
60
50
40
30
20
10
0
0%
10%
20%
30%
40%
50%
60%
Positive Duty Cycle
70%
80%
90%
100%
Notes:
1. PD dimmable version comes with an extra 2 wires on the output side for PWM type dimming: +Purple/-Gray.
2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle.
3. Output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
Similar pages