UTC MC33272G-S08-R Voltage operational amplifier Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MC33272
Preliminary
BIPOLAR IC
SINGLE SUPPLY, HIGH SLEW
RATE ,LOW INPUT OFFSET
VOLTAGE OPERATIONAL
AMPLIFIERS

DESCRIPTION
SOP-8
The UTC MC33272 is a Bipolar dual operational amplifier with
high performance concepts. This amplifier exhibits low input
voltage noise with high gain bandwidth product and slew rate. The
all NPN output stage exhibits no deadband crossover distortion,
large output voltage swing, excellent phase and gain margins, low
open loop high frequency output impedance and symmetrical
source and sink AC frequency performance.

FEATURES
* Single (or dual) supply operation from +3 V to +36V
(±1.5V~±18V)
* Large output voltage swing: +14.1V/-14.6V
* Input offset voltage trimmed to 100µV (Typ)
* Very low input bias current: 300nA
* Very low input offset current: 3.0nA
* High input resistance: 16MΩ
* High slew rate: 10V/µs
* High gain bandwidth product: 24MHz @ 100kHz

* Low noise: 18nV / Hz @ 1.0kHz
ORDERING INFORMATION
Ordering Number
MC33272G-S08-R

* Low total harmonic distortion: 0.003%
* Power supply drain current: 2.15mA per amplifier
Package
SOP-8
Packing
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 6
QW-R105-051.a
MC33272

Preliminary
BIPOLAR IC
PIN CONFIGURATION
Output 1
1
8
VCC
7
Output 2
IN1-
2
1
+
IN1+
3
6
IN2-
5
IN2+
2
VEE

4
+
PIN DESCRIPTION
PIN NO.
1
2, 3
4
5, 6
7
8
PIN NAME
Output 1
IN1-, IN1+
VEE
IN2+, IN2Output 2
VCC
DESCRIPTION
The output of channel 1
The input of channel 1
Power supply
The input of channel 2
The output of channel 2
Power supply
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 6
QW-R105-051.a
MC33272

Preliminary
BIPOLAR IC
BLOCK DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 6
QW-R105-051.a
MC33272

Preliminary
BIPOLAR IC
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
RATINGS
UNIT
Supply Voltage
VCC to VEE
+36
V
Input Differential Voltage Range
VIDR
(Note 2)
V
Input Voltage Range
VIR
(Note 2)
V
Output Short Circuit Duration (Note 3)
tSC
Indefinite
sec
Maximum Power Dissipation
PD
(Note 3)
mW
Maximum Junction Temperature
TJ
+150
°C
Operating Temperature Range
TOPR
-40 ~ 85
°C
Storage Temperature
TSTG
-60~+150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Either or both input voltages must not exceed the magnitude of VCC or VEE.
3. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded.

DC ELECTRICAL CHARACTERISTICS (VCC=+15 V, VEE=-15 V, TA=25°C, unless otherwise noted.)
PARAMETER
Input Offset Voltage
Average Temperature
Coefficient of Input Offset
Voltage
Input Bias Current
Input Offset Current
Common Mode Input
Voltage Range
Large Signal Voltage Gain
SYMBOL
|VIO|
∆VIO/∆T
TEST CONDITIONS
VCC=+15V, VEE=-15V
RS=10Ω,
VCM=0V, VO=0V VCC=5.0V, VEE=0
MIN
TYP
0.1
RS=10Ω, VCM=0V, VO=0V, TA=-40°C~+85°C
2.0
IIB
|IIO|
VCM=0V, VO=0V
VCM=0V, VO=0V
300
3.0
VICR
∆VIO=5.0mV, VO=0V
VO=0V~10V, RL=2.0kΩ
Common Mode Rejection
AVOL
VO+
VOVO+
VOVOL
VOH
CMR
Power Supply Rejection
PSR
Output Voltage Swing
Output Short Circuit
Current
ISC
Power Supply Current Per
Amplifier
ICC
VID=±1.0V
RL=2.0kΩ
RL=2.0kΩ
RL=10kΩ
RL=10kΩ
RL=2.0kΩ
RL=2.0kΩ
90
13.4
650
65
nA
nA
V
3.7
80
100
dB
V
V
V
V
V
V
dB
80
105
dB
+25
+37
-37
2.15
13.4
100
13.9
-13.9
14
-14.7
UNIT
mV
mV
µV/°C
VEE to (VCC-1.8)
VCC=5.0V,
VEE=0V
Vin=+13.2V~-15V
VCC/VEE=+15V/-15V, +5.0V/-15V,
+15V/-5.0V
Source
VID=1.0V, Output to Ground
Sink
VCC=+15V, VEE=-15V
VO=0V
VCC=5.0V, VEE=0V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
VCC=+15V,
VEE=-15V
MAX
1.0
2.0
-13.5
-14.1
0.2
5.0
-25
2.75
2.75
mA
mA
mA
mA
4 of 6
QW-R105-051.a
MC33272

Preliminary
BIPOLAR IC
AC ELECTRICAL CHARACTERISTICS (VCC=+15 V, VEE=-15 V, TA=25°C, unless otherwise noted.)
PARAMETER
Slew Rate
SYMBOL
SR
TEST CONDITIONS
MIN
Vin=-10V~+10 V, RL=2.0kΩ,
8
CL=100pF, AV=+1.0V
f=100kHz
17
RL=2.0kΩ, VO=0V, f=20kHz
Open Loop
RL=2.0kΩ, CL=0pF
RL=2.0kΩ, CL=0pF
f=20Hz~20kHz
VO=20Vpp, RL=2.0kΩ, THD≤1.0%
RL=2.0kΩ, f = 20Hz~20kHz,
VO=3.0Vrms, AV=+1.0
VO=0V, f = 6.0MHz
VCM=0V
VCM=0V
TYP
MAX
UNIT
10
V/µs
24
65
5.5
12
55
-120
160
MHz
dB
MHz
dB
Degrees
dB
kHz
0.003
%
35
16
3
Ω
MΩ
pF
Gain Bandwidth Product
AC Voltage Gain
Unity Gain Frequency
Gain Margin
Phase Margin
Channel Separation
Power Bandwidth
GBW
AVO
fU
Am
φm
CS
BWp
Total Harmonic Distortion
THD
Open Loop Output Impedance
Differential Input Resistance
Differential Input Capacitance
|ZO|
RIN
CIN
Equivalent Input Noise Voltage
en
RS=100Ω, f =1.0kHz
18
nV/ Hz
Equivalent Input Noise Current
in
f=1.0kHz
0.5
pA/ Hz
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 6
QW-R105-051.a
MC33272
Preliminary
BIPOLAR IC
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R105-051.a
Similar pages