Click on Series name for product info on aimtec.com Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter FEATURES: Models Single output Model • AC-DC Constant Current or Constant Voltage LED Driver • Input range 90-305VAC/47-440Hz • High Efficiency up to 89% • Operating temperature -40 to 85°C • Dimmable via resistive / 0-10Vdc / PWM • 5 Years Limited Warranty Output Voltage Range ③ (V) Output Current ③ (A) 36-50 0 - 1.20 Input Voltage (VAC/Hz) Input Voltage (VDC) • • • • • Over Temperature Protection Over Current Protection Waterproof Case rated IP68 Power Factor Correction Short Circuit Protection Mode of Operation OCP / OVP Max Output Power (W) ① Efficiency (%) 1.27 90-305 / 130-430 Constant Current 60 89 47-440 50.7 1.77 90-305 / AMEPR60C-36170AZ 24-36 0 - 1.70 130-430 Constant Current 59.8 88 47-440 36.6 2.55 90-305 / AMEPR60C-24250AZ 12-24 0 - 2.50 130-430 Constant Current 60 87 47-440 24.5 5.2 90-305 / AMEPR60C-12500AZ 5-12 0 - 5.0 130-430 Constant Current 60 85 47-440 12.3 ① Exceeding the maximum output power will permanently damage the converter ② The dimming feature is not supported when units are used in Constant Voltage mode only. ③ In constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown. All models can be ordered with optional North American colour input wires (black (L), white (N), green (GND)). Add “–NA” to part number when ordering. Note: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25°C, humidity<75%, nominal input voltage (115/230/277VAC) and at rated output load unless otherwise specified. See http://www.aimtec.com/terms-sale AMEPR60C-AZ’s AC/DC LED drivers have electrical safeguards designed within to protect it from conventional electrical abnormalities with the levels listed in the safety table. Applications for use within rural agricultural, heavy industrial, and other areas or regions which are prone to ‘dirty’ electrical conditions which would subject any of the above models to excessive voltages surges or spikes, may damage or cause early life failure of product. In this case consideration should be made by the end user to ensure that adequate line or mains surge suppression is installed in front of Aimtec device to ensure the longevity of the products. Failure to identify excessive line surges violations prior to installation may damage sensitive equipment permanently. AMEPR60C-50120AZ Input Specifications Parameters Inrush current <2ms Leakage current AC current Power Factor External fuse Start up time Surge voltage www.aimtec.com F 052.1e R3.C Conditions 115VAC 230VAC 115VAC 230VAC 115VAC 230VAC 115VAC 230VAC Typical 30 50 0.5 0.7 0.73 0.33 250 2sec Tel: +1 514 620 2722 1 of 7 Maximum Units A mA A 0.97 0.93 250V/1.5A 440 ms V Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter Output Specifications Parameters Conditions Typical Maximum Conditions Typical Rated Current accuracy (CC Mode) ±3 Voltage accuracy (CV Mode) ±3 Line regulation LL-HL ±1 Load regulation 0-100% load ±3 20MHz Bandwidth 75 Ripple & Noise ④ Hold-up time 90 Current adjustment range 100-0 Minimum Load Voltage See the models table ④ Tested with 0.1µF (C/C) or (M/C) and 47µF (E/C) parallel capacitors at the end. Isolation Specifications Parameters Tested I/O voltage Isolation Resistance Isolation Capacitance 3 sec/3.5mA 500VDC General Specifications Parameters Switching frequency Over current protection Over voltage protection Short circuit protection Short circuit restart Over temperature protection Operating temperature Maximum case temperature Storage temperature Temperature coefficient Cooling Humidity Case material Potting Wires Weight Dimensions (L X H X W) MTBF >1000 1000 Conditions Units % % % % mV p-p ms % Units 3000 VAC MΩ pF Typical Maximum 130 ≥105 110% of Vout Continuous Auto recovery >105°C -40 to +85 With derating over 55°C Units KHz % % o 100 -40 to +95 ±0.02 Free air convection Plastic Epoxy (IP67 rated) UL1015 18AWG *20CM 530 5.30 x 2.27 x 1.59 inches 134.80 x 57.68 x 40.50 mm >400,000 hrs (MIL-HDBK-217F at +25°C) 95 C C o C % / oC o % RH g Safety Specifications Parameters Agency approvals Standards www.aimtec.com F 052.1e R3.C cULus, CE UL8750, UL60950-1, EN55022, class B, EN60529(IP68), EN61347-1, EN61347-2-13 Information Technology Equipment EN55022 Class B Harmonic Current Emissions IEC/EN 61000-3-2, Class C Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Level 3 RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Electrical Fast Transient / Burst Immunity IEC 61000-4-4 Level 2 Surge Immunity IEC 61000-4-5 Level 3 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Level 1 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 Tel: +1 514 620 2722 2 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter Dimensions End View 40.50 (1.59) Top View 16.75 (0.66) 137.33 (5.41) 60.00 (2.36) 32.00 60.00 (1.26) (2.36) Side View 40.50 (1.59) 200.00 (8.00) 200.00 (8.00) Input/Output Wires are 18 AWG 20cm 2.30 (0.09) 161.30 (6.35) Temperature Graph Free Air Convection 55 º C Output Power % 100 80 Safe Operating Area 60 40 20 0 -40 -20 0 20 40 60 80 85 100 Ambient Temperature º C www.aimtec.com F 052.1e R3.C Tel: +1 514 620 2722 3 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter Dimming Control “C” Versions AMEPR60C-50120AZ www.aimtec.com F 052.1e R3.C Tel: +1 514 620 2722 4 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter AMEPR60C-36170AZ www.aimtec.com F 052.1e R3.C Tel: +1 514 620 2722 5 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter AMEPR60C-24250AZ www.aimtec.com F 052.1e R3.C Tel: +1 514 620 2722 6 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter AMEPR60C-12500AZ NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 052.1e R3.C Tel: +1 514 620 2722 7 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only