Mean Well OWA-60U 60w single output moistureproof adaptor Datasheet

60W Single Output Moistureproof Adaptor
IP67
( for power body )
■ Features
Universal AC input / Full range (up to 264VAC)
High efficiency up to 91%
Protections: Short circuit / Over current /
Over voltage / Over temperature
Class Ⅱ power unit, no FG
Class 2 power unit
Fully isolated plastic case
Fanless design, cooling by free air convection
No load power consumption <0.15W
Comply with EISA 2007 DoE and NRCan
UL LISTED, suitable for dry and damp locations
5 years warranty
O WA - 6 0 U
( for 42V,48V,54V )
series
( except for 42V,48V,54V )
■ Applications
Indoor LED lighting
LED decorative lighting
LED office lighting
General electronic products in
dusty or humid environment
■ Description
OWA-60U is one 60W single-output external LED power supply series. Pairing the North American
type of AC plug and the prevailing DC connectors, OWA-60U, working like an adaptor, simplifies
the connection with LED lighting fixtures without extra wiring efforts. The entire series
is certified with the “UL LISTED” for dry and damp locations.
As a class Ⅱ (no FG) design, the enclosure of OWA-60U is a 94V-0 flame retardant plastic case.
The interior is fully potted with silicone that enhances the heat dissipation. With the working
efficiency up to 91%, OWA-60U is cooled by free air convection; the working temperature ranges
from -35℃ to +70℃.
■ Model Encoding
OWA - 60 U - 12
Output voltage
North American type of AC plug
Output wattage
Series name
File Name:OWA-60U-SPEC 2015-05-28
O WA - 6 0 U
60W Single Output Moistureproof Adaptor
series
SPECIFICATION
MODEL
OWA-60U-12 OWA-60U-15 OWA-60U-20 OWA-60U-24 OWA-60U-30 OWA-60U-36 OWA-60U-42 OWA-60U-48 OWA-60U-54
DC VOLTAGE
12V
15V
20V
24V
30V
36V
42V
48V
54V
CONSTANT CURRENT REGION 6 ~ 12V
7.5 ~ 15V
10 ~ 20V
12 ~ 24V
15 ~ 30V
18 ~ 36V
21 ~ 42V
24 ~ 48V
27 ~ 54V
RATED CURRENT
5A
4A
3A
2.5A
2A
1.67A
1.5A
1.25A
1.12A
RATED POWER
60W
60W
60W
60W
60W
60.12W
63W
60W
60.48W
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 250mVp-p 250mVp-p 350mVp-p
OUTPUT
VOLTAGE TOLERANCE Note.3 ±4.0%
±4.0%
±4.0%
±3.0%
±3.0%
±2.0%
±1.0%
±1.0%
±1.0%
LINE REGULATION
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
LOAD REGULATION
±1.5%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
SETUP, RISE TIME Note.4 500ms, 80ms/230VAC
INPUT
1000ms, 80ms/115VAC at 95% load
HOLD UP TIME (Typ.)
10ms at full load
115VAC / 230VAC
VOLTAGE RANGE
90 ~ 264VAC
127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY
(Typ.)
115VAC
87%
88%
88%
88.5%
88.5%
88.5%
88.5%
88.5%
89%
230VAC
88%
89%
89%
90%
90%
90%
90%
91%
91%
AC CURRENT (Typ.)
1.2A / 115VAC
0.7A / 230VAC
COLD START 35A(twidth=750μs measured at 50% Ipeak) at 115VAC
INRUSH CURRENT (Typ.)
COLD START 65A(twidth=750μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A
2 units (circuit breaker of type B) / 4 units (circuit breaker of type C) at 230VAC
CIRCUIT BREAKER
LEAKAGE CURRENT
OVER CURRENT
PROTECTION
SHORT CIRCUIT
<0.25mA / 240VAC
95 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
14 ~ 16V
OVER VOLTAGE
17.5 ~ 23V 23 ~ 27V
28 ~ 34V
34 ~ 40V
41 ~ 50V
46 ~ 54V
53 ~ 62V
58 ~ 66V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE
Shut down o/p voltage, re-power on to recover
WORKING TEMP.
-35 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 95% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH
SAFETY &
EMC
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS
UL8750 listed; CSA C22.2 No.250.13-12(except for 42V,48V,54V); IP67 approved for power body
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to FCC Part15
MTBF
292.8K hrs min.
OTHERS DIMENSION
PACKING
NOTE
MIL-HDBK-217F (25℃)
130*53*35mm
0.41Kg; 16pcs/6.8Kg/0.85CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel
capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
File Name:OWA-60U-SPEC 2015-05-28
O WA - 6 0 U
60W Single Output Moistureproof Adaptor
series
Block Diagram
PWM fosc : 25~67KHz
EMI FILTER
&
RECTIFIERS
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
+V
-V
O.L.P.
O.T.P.
O.L.P.
DETECTION
CIRCUIT
PWM
CONTROL
O.V.P.
Derating Curve
Static Characteristics
100
100
90
80
230VAC
Input only
70
60
50
LOAD (%)
LOAD (%)
80
40
20
-35
-25
-10
0
15
30
50
AMBIENT TEMPERATURE (℃)
60
70
(HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
264
INPUT VOLTAGE (V) 60Hz
File Name:OWA-60U-SPEC 2015-05-28
O WA - 6 0 U
60W Single Output Moistureproof Adaptor
series
EFFICIENCY vs LOAD (48V Model)
OWA-60U series possess superior working efficiency that up to 91% can be reached in field applications.
92
91
90
89
EFFICIENCY (%)
88
87
230V
86
115V
85
84
83
82
10%
20%
30%
40%
50%
6 0%
70%
80%
90%
100%
LOAD
DRIVING METHODS OF LED MODULE
There are two major kinds of LED drive method, "direct drive" and "with LED driver".
A typical LED power supply may either work in "constant voltage mode (CV)" or "constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B).
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
Vo(%)
100
(B)
Constant
Current area
(A) Constant
Voltage area
Should there be any compatibility issues, please contact MEAN WELL.
50
(min)
(C)
Hiccup
Protection
50
100
Io(%)
Typical LED power supply I-V curve
File Name:OWA-90U-SPEC 2015-05-28
O WA - 6 0 U
60W Single Output Moistureproof Adaptor
Mechanical Specification
CASE NO.: OWA-60
series
Unit:mm
130
5
5
1500±50
85.5
300±20
53
C"+"
31.5
SVT 18AWG×2C
UL1185 16AWG×2C
11±0.5
5
ID 2.1 x OD 5.5
2 -ψ
4.5
Outside
※ T case: Max. Case Temperature.
Inside
-V not connected to AC FG
3
35
5
Input Plug Type
Output Plug Assignment
All models : NEMA 1-15p male plug
All models : 2.1φ x 5.5φ x 11 mm, center +,
tuning fork type
PIN NO. OUTPUT
Outside
Inside
CENTER
+V
Recommend Mounting Direction
Installation Manual
Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html
File Name:OWA-60U-SPEC 2015-05-28
Similar pages