EPL225 Series AC-DC Power Supplies 225Watts • 150WConvection/225WForced-cooledRatings • 2”by4”Footprint • Low1.26”Profile • 12VFanOutput •HighEfficiency,upto95% • ITEApprovals • HighPowerDensity •Lessthan0.5WNoLoadInputPower •3YearWarranty The EPL225 series maximises efficiency across the load range and minimises no load power consumption minimising heat dissipation, reducing running costs and enabling compliance with the latest environmental goals and legislation. Fully approved for ITE and Industrial applications the EPL225 provides up to 150W when convection cooled and up to 225 W when force cooled at just 10 CFM. A 12 V 0.5 A fan supply is included to support force cooled applications. The small footprint, low profile, low noise and comprehensive safety agency approvals allow this versatile product to be used in a wide range of ITE and industrial applications. Dimensions: EPL225: 4.00x2.00x1.26”(101.6x50.8x32.3mm) Models & Ratings Output Current Convection-cooled Forced-cooled(1) Output Power Output Voltage 225 W 12.0 V 12.50 A 225 W 15.0 V 10.00 A 225 W 18.0 V 8.33 A 225 W 24.0 V 225 W 225 W 225 W Fan Output Efficiency(2) Model Number 18.75 A 12 V/0.5 A 93% EPL225PS12 15.00 A 12 V/0.5 A 93% EPL225PS15 12.50 A 12 V/0.5 A 93% EPL225PS18 6.25 A 9.38 A 12 V/0.5 A 93% EPL225PS24 28.0 V 5.36 A 8.04 A 12 V/0.5 A 93% EPL225PS28 36.0 V 4.16 A 6.25 A 12 V/0.5 A 93% EPL225PS36 48.0 V 3.10 A 4.69 A 12 V/0.5 A 93% EPL225PS48 Notes 1. Requires 10 CFM. 2. Minimum average efficiencies measured at 25%, 50%, 75% & 100% of 225 W load and 230 VAC input. Summary Characteristic Input Range Minimum Typical Maximum Units Notes & Conditions 85 115/230 264 VAC Derate load from 100% at 90 VAC to 90% at 85 VAC 0.5 W % 230 VAC (see fig.1 & 2) +70 °C See derating curve (fig.3) No Load Input Power Efficiency Operating Temperature 1 95 -20 EMC Conducted: EN55011/22, Class B, Radiated: EN55011/22, Class A (Class B with external core, see EMC Emissions for details) Safety Approvals IEC60950-1, EN60950-1, UL60950-1, CSA22.2 No. 234 per cUL www.xppower.com EPL225 Series AC-DC Power Supplies Input Minimum Typical Maximum Units Notes & Conditions Input Voltage - Operating 80 115/230 264 VAC Derate output from 100% at 90 VAC to 90% at 85 VAC and 85% at 80 VAC Input Frequency 47 50/60 63 Hz Characteristic Power Factor Input Current - Full Load Inrush Current Earth Leakage Current 2.2/1.1 A 115/230 VAC 120 A 230 VAC cold start, 25 ºC 115/230 VAC/50 Hz (Typ), 264 VAC/60 Hz (Max) 80/140 No load Input Power Input Protection 230 VAC, 100% load EN61000-3-2 class A EN61000-3-2 class C > 145W >0.9 230 µA 0.5 W F3.15 A/250 V Internal fuse fitted in line and neutral. Output - Main Output Characteristic Output Voltage - V1 Minimum Typical 12 Initial Set Accuracy Maximum Units Notes & Conditions 48 VDC See Models and Ratings table ±1 % 50% load, 115/230 VAC % None Output Voltage Adjustment-V1 Minimum Load 0 A Start Up Delay Hold Up Time 2 10 20/13 s ms 115/230 VAC full load. Min at full load, 115 VAC. Typical at 150W/ 225W Drift ±0.02 % After 20 min warm up Line Regulation ±0.5 % 90-264 VAC Load Regulation ±0.5 % 0-100% load. Transient Response 4 % Recovery within 1% in less than 500 µs for a 50-75% and 75-50% load step Over/Undershoot 7 % Full load Ripple & Noise 1 % pk-pk Overvoltage Protection 110 140 % Overload Protection 110 170 % I nom 0.02 %/˚C Short Circuit Protection Temperature Coefficient Overtemperature Protection 20 MHz bandwidth and 10 µF electrolytic capacitator in parallel with 0.1 µF ceramic capacitator. Vnom, recycle input to reset Trip & Restart °C www.xppower.com Measured internally, Auto Resetting 2 EPL225 Series AC-DC Power Supplies General Characteristic Minimum Typical Maximum Units 95 Efficiency % VAC 4000 Isolation: Input to Output Input to Ground Output to Ground Switching Frequency Notes & Conditions 230 VAC (see fig. 1 & 2) 2 MOPP 1500 VAC 1 MOPP 1500 VAC 1 MOPP PFC 40 130 kHz 50 95 kHz 22/14.6 W/in3 Forced/convection-cooled 300 kHrs MIL-HDBK-217F, Notice 2 +25 °C GB 0.43(195) lb(g) Power Density Mean Time Between Failure Weight Main converters Efficiency Vs Load Figure 1 EPL225PS12 12 V at 225 W 100% Efficiency 95% 85Vac input 90% 90Vac input 115Vac input 85% Convection-cooled Forced-cooled 230Vac input 80% 264Vac input 75% 70% 10 20 30 40 50 60 70 80 90 100 Load (%) E Figure 2 EPL225PS24 24 V at 225 W 100% 95% 85Vac input 90% 90Vac input 115Vac input 85% Convection-cooled Forced-cooled 230Vac input 80% 264Vac input 75% 70% 10 20 30 40 50 60 70 Load (%) 3 www.xppower.com 80 90 100 EPL225 Series AC-DC Power Supplies Environmental Characteristic Maximum Units Operating Temperature Minimum -20 Typical +70 °C Storage Temperature -40 +85 Cooling 10 Humidity 5 Operating Altitude Notes & Conditions See derating curve, fig.3 °C CFM Forced-cooled > 150W 95 %RH Non-condensing 5000 m Shock ±3 x 30g shocks in each plane, total 18 shocks. 30g = 11ms (+/- 0.5msecs), half sine. Conforms to EN60068-2-27 Vibration Single axis 10-500 Hz at 2g sweep and endurance at resonance in all 3 planes. Conforms to EN60068-2-6 Temperature Derating Curve Figure 3 Output Load (%) 100 50 0 -20 0 +50 +70 Ambient Temperature (ºC) EMC: Emissions Standard Test Level Conducted Phenomenon EN55011/22 Class B Radiated EN55011/22 Class A Class B with King Core KSB RC 13 x 23 x 7 on input cable and KSB + 25 x 12 x 5 on output cable. EN61000-3-2 Class A Meet Class C for loads above 145W Harmonic Current Voltage Functions Criteria Notes & Conditions EN61000-3-3 EMC: Immunity Phenomenon Medical Device EMC Low Voltage PSU EMC Standard Test Level Criteria IEC60601-1-2 Ed.4.0 : 2014 as below as below EN61204-3 High severity level ESD EN61000-4-2 4 A Radiated EN61000-4-3 3 A A EFT EN61000-4-4 3 Surges EN61000-4-5 Installation class 3 A Conducted EN61000-4-6 3 A Magnetic Fields EN61000-4-8 4 A Dip >95% (0 VAC), 8.3 ms EN55024 (100 VAC) EN55024 (240 VAC) Dips and Interruptions EN60601-1-2 (100 VAC) EN60601-1-2 (240 VAC) A Dip >95% (0 VAC), 4160 ms Dip >95% (0 VAC), 10.0 ms B A Dip >95% (0 VAC), 5000 ms Dip 100% (0 VAC), 10.0 ms B Dip 100% (0 VAC), 20 ms Dip 30% (40 VAC), 500 ms A A A A Dip 100% (0 VAC), 5000 ms Dip 100% (0 VAC), 10.0 ms B Dip 100% (0 VAC), 20 ms Dip 30% ( 168 VAC), 500 ms A A Dip 100% (0 VAC), 5000 ms www.xppower.com At 220 W A Dip 30% (168 VAC), 500 ms Dip 60% (96 VAC), 100 ms ±8kV contact, ±15kV air A Dip 30% (70 VAC), 416 ms Dip 60% (40 VAC), 100 ms Notes & Conditions A A At 120 W Derate Output Power to 30W At 220 W At 150 W At 170 W B 4 EPL225 Series AC-DC Power Supplies Safety Approvals Safety Agency Safety Standard Notes & Conditions CB Report IEC60950-1:2005 + A1:2009 + A2: 2013 Information Technology UL UL60950-1 (2011), CSA 22.2 No.60950-1-11 Ed 2 Information Technology TUV EN60950-1: 2006 + A11: 2009 + A1:2010 + A12: 2012 Information Technology CE LVD Isolation Safety Standard Primary to Secondary 2 x MOPP (Means of Patient Protection) Notes & Conditions Primary to Earth 1 x MOPP (Means of Patient Protection) Secondary to Earth 1 x MOPP (Means of Patient Protection) Mechanical Details CN1 - Input Connector 4.00 (101.6) 3.75 (95.3) For 18 V to 48 V For 12 V & 15 V Pin 1 Line Pin 2 Not Fitted Pin 3 Neutral Mates with JST housing VHR-3N and JST Series SVH-21T-P1.1 crimp terminals L4 1 1.75 (44.5) 2.00 (50.8) +Vout CN2 COM 6 3 CN1 2 1 TR1 1 CN3 2 1 CN2 - Output Connector C2 0.06 (1.6) 0.13 (3.2) 0.13 (3.2) 0. 1 3 (3 .4 ) C52 1.10 (28.0) Mounting holes marked with must be connected to safety earth Pin 1 +Vout Pin 2 +Vout Pin 3 +Vout Pin 4 Com Pin 5 Com Pin 6 Com Mates with JST housing VHR-6N and JST Series SVH-21T-P1.1 crimp terminals 0.10 (2.6) CN3 - Fan Connector 5 Fan - Pin 2 Fan + Mates with Molex housing 22-01-1022 and 2759 crimp terminals Notes 1. All dimensions shown in inches (mm). Tolerance: ±0.02 (0.5) Pin 1 2. Weight: 0.43 lbs (195 g) approx. www.xppower.com EPL225 Series AC-DC Power Supplies Thermal Considerations In order to ensure safe operation of the PSU in the end-use equipment, the temperature of the components listed in the table below must not be exceeded. Temperature should be monitored using thermocouples placed on the hottest part of the component (out of direct air flow). See Mechanical Details for component locations. Temperature Measurements (At Maximum Ambient) Max Temperature °C Component TR1 Coil 120°C L4 Coil 120°C C2 105°C C52 105°C Service Life The estimated service life of the EPL225 is determined by the cooling arrangements and load conditions experienced in the end application. Due to the uncertain nature of the end application this estimated service life is based on the actual measured temperature of key capacitors with in the product when installed by the end application, The graph below expresses the estimated lifetime based on the temperature of these key components based on the average temperature over the lifetime of the equipment. Estimated Service Life vs Component Temperature Figure 4 80000 70000 60000 Lifetime (Hrs) 50000 C52 40000 C2 30000 20000 10000 0 105 95 85 75 65 55 45 C2 + C52 Temperature (ºC) www.xppower.com 04August15