LIGITEK LG-5630WKZ-DT-2-CW-D01 0.6w power light led Datasheet

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
0.6W Power Light LED
Pb
Lead-Free Parts
LG-5630WKZ-DT-2-CW-D01
DATA SHEET
DOC. NO :
QW0905-LG-5630WKZ-DT-2-CW-D01
REV.
:
A
DATE
:
19 - Sep. - 2011
發行
立碁電子
DCC
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Product Model Designation System
LG - 56 30 WK Z - D T - 2 - CW - X
X1
X2
X1
Title
X3
X2
Dimension(L)
LG:Ligitek
X7
Package
T:Tape&Reel
57:5.7mm
56:5.6mm
X4
X5
X6 X7
X3
X8
X4
Dimension(W)
30:3.0mm
X8
Emitting Color
WK:White Color
X9
Chip Modification
Chromaticity Coordinates
-X: 2 chip in 1(Parallel)
-1: 1 chip in 1
-2: 2 chip in 1(Series)
-CW: Cool White
-NW: Neutral White
-WW: Warm White
Page 1/15
X9
X10
X5
X6
Zener
Epoxy Color
D:Yellow Diffused
X10
Bin Modification
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Typical Applications
Features
*. White colored SMTpackage
*.Suitable for all SMT assembly and soldering methodes
*. Pb-Free Reflow soldering application
*. More Energy Efficient than lncandescent and most Halogen lamps.
*. RoHS compliant
*. Reading Light (car,bus,aircraft)
*. Portable(flashlight,bicycle).
*. Backlights(Monitor,TV) / Light Guides.
*. Automotive Exterior (Stop-Tail-Tum,CHMSL,Mirror Side Repeat).
*. Commercial and Residential Architectural lighting.
*. Mini-accent / Uplighters / Downlighters / Orientation lighting
*. Fiber Optic Alternative / Decorative / Entertainment lighting.
*. Security / Garden lighting.
*. Cove / Undershelf / Task lighting.
*. Traffic signaling / Beacons / Rail crossing and Wayside lighting.
Dimension
5.3
C
3.0
A
C
Recommended Solder Patterns
5.6
2.0
0.9
1.6
1.62
3.8
6.8
0.5
0.8
1.28
0.5 2.1
Slug
Anode(+)
0.3 2.3
0.8
Cathode(-)
Note:
1.The tolerance unless mentioned is ±0.1mm,unit=mm.
2.The slug has polarity as anode.
3.It is strongly recommended to apply on electrically isolated
heat conducting film between the slug and contact surfaces.
Page 2/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Absolute Maximum Ratings at Ta=25 ℃
Ratings
Parameter
Symbol
UNIT
White
DC Forward Current
IF
80
mA
Power Dissipation
PD
0.61
W
Peak pulse current
Duty 1/10@10KHz
IFP
100
mA
LED junction Temperature
Tj
125
℃
Reverse Current(VR=5V)
Ir
10
μA
ESD Sensitivity
VB
±2000
V
Storage Temperature
Tstg
-40 ~ +100
℃
Operating Temperature
Topr
-40 ~ +85
℃
Soldering Temperature
Tp
260
℃
Hand Soldering Time
at320°C(Max)
Tsol
3
seconds
Note:
1.Proper current derating must be observed to maintain temperature below the maximum.
2.LEDS are not designed to be driven in reverse bias.
Luminous Intensity Characteristics at 60mA
(Ratings At 25°C Ambient)
Luminous Intensity
PART NO
Emission
Color
Min.
Typ.
Max.
LG-5630WKZ-DT-2-CW-D01
White
28
30
----
Note :
1. White emitters are built with InGaN.
2. Luminous Intensity is measured with an accuracy of ±10%
Page 3/15
Units
lm
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Forward Voltage Characteristics at 60mA
(Ratings At 25°C Ambient)
Vf
PART NO
Emission
Color
Min.
Typ.
Max.
LG-5630WKZ-DT-2-CW-D01
White
----
6.6
7.6
Units
V
Note : Forward Voltage is measured with an accuracy of±0.1V
Chromaticity Coordinates Characteristics at 60mA
(Ratings At 25℃ Ambient )
PART NO
Emission
Color
LG-5630WKZ-DT-2-CW-D01
White
Chromaticity Coordinates
(TYP.)
X
Y
0.434
0.4032
Note : ±0.01 is tester tolerance.
Emission Angle Characteristics at 60mA
(Ratings At 25°C Ambient )
PART NO
Emission
Color
Lambertian
Units
LG-5630WKZ-DT-2-CW-D01
White
120
Degrees
Color Rendering Index Characteristics at 60mA
(Ratings At 25°C Ambient )
CRI
PART NO
Emission
Color
Min.
Typ.
Max.
LG-5630WKZ-DT-2-CW-D01
White
75
----
----
Page 4/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Bin Code Description
Bin Code
Luminous
Intensity
F34D
Luminous Intensity
(Lm)
@IF=60mA
Bin
Code
Min.
Max.
F28D
28
30
F30D
30
32
F32D
32
34
F34D
34
36
F36D
36
38
CIE
Forward
Voltage
NO
6.6-6.8
Color Rank
@IF=60mA
Forward Voltage(V)
@IF=60mA
WN
6.2-6.4
WO
6.4-6.6
WP
6.6-6.8
XN
6.8-7.0
XO
7.0-7.2
XP
7.2-7.4
7.4-7.6
Page 5/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Bins Code of chromaticity coordinates
Color Coordiante at20mA
CCT(K)
5650~6300
6300~7000
BIN CODE
1
2
3
4
X
Y
X
Y
X
Y
X
Y
WN
0.315
0.344
0.329
0.357
0.329
0.345
0.316
0.333
WO
0.316
0.333
0.329
0.345
0.329
0.331
0.317
0.32
WP
0.317
0.32
0.329
0.331
0.329
0.32
0.3185 0.3105
XN
0.3032 0.3332 0.315
0.344
0.316
0.333 0.3053 0.3222
XO
0.3053 0.3222 0.316
0.333
0.317
0.32
XP
0.3076 0.3106 0.317
0.32
0.32
0.301
NOTE: Tolerance on each color bin(x,y)is±0.01
Page 6/15
0.3076 0.3106
0.311
0.293
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
The C.I.E 1931 Chromaticity Coordinates
0.40
0.38
5650K
6300K
0.36
7000K
0.34
XN
XO
0.32
WN
WO
WP
XP
0.30
0.28
0.26
0.28
0.30
0.32
Page 7/15
0.34
0.36
0.38
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Recommended Profile for Reflow Soldering
Pb -free solder temperature profile
Pb -free solder Temperature profile
Pre-heat
Pre-heat time
Peak-Temperature
Soldering time condition
180-200°C
120 Sec Max
260°C Max
10 Sec Max
260°C.Max.
10 Sec .Max.
1-5°C/Sec.
60 Sec.Max.
Above220°C
6°C/Sec.
Pre-heating
180-200°C
1-5°C/Sec.
120 Sec. Max.
(1) Reflow soldering should not be done more than two times.
(2) When soldering,do not put stress on the LEDs during heating.
(3) After soldering,do not warp the circuit board.
(4) The encapsulated material of the LEDs is silicone.
Precautions should be taken to avoid the strong pressure on the encapsulated part.
So when using the chip mounter,the picking up nozzle that does not affect the
silicone resin should be used.
Hand Soldering Conditions:
Do not exceed 3 seconds at maximum 320°C under soldering iron.(one time only)
Page 8/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Fig.1 Forward current vs. Forward Voltage
Forward Current(mA)
80
60
40
20
0
4.0
5.0
6.0
7.0
8.0
9.0
Forward Voltage(V)
Fig.2 Forward current vs.Luminous Intensity
Relative Luminous Intensity(%)
1.2
1.0
0.8
0.6
0.4
0.2
0
30
60
Page 9/15
90
120
150
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Relative Luminous Flux(%)
Fig.3 Luminous Spectrum(Ta=25 ℃)
SPECTRAL RADIANCE
100
80
60
40
20
0
400
500
600
700
800
Wavelength (nm)
Fig.4 Directivity Radiation
0°
-30°
30°
-60°
100% 75% 50%
60°
25%
0
Page 10/15
25% 50% 75% 100%
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Carrier Type Dimensions
4.0
0.25
1.5
1.75
-
5.5
+
12.0±0.3
5.95
9.3
Polarity
4.0
3.25
1.2
Note : The tolerances unless mentioned is ±0.2mm.
Packing Specifications
Label
Aluminum Moist-Proof bag
Label
Desiccant
Page 11/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Label Explanation
Pb
PART :
LG-5630WKZ-DT-2-CW-D01
LOT :
GS1-060109
QTY(PCS):
1000
BIN/HUE :
F28D/WO
BIN : Luminous Flux
HUE : Chromaticity Coordinates
(CIE_x , CIE_y)
VF:6.6-6.8
6.6 - 6.8 : Forward Voltage
Reel Dimensions
16.0±1.0
60.2±0.5 178±1
13.5
Page 12/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Box Explanation
1. 4 BAG / INNER BOX
2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm
H
W
L
3. 10 INNER BOXES / CARTON
4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm
W
L
H
Page 13/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Reliability Test:
(1)Test items and results
Classification
Test Item
Test Condition
Sample
Size
Operating Life Test
1.Ta=Under Room Temperature As Per Data Sheet
Maximum Rating.
2.If=60mA
3.t=1000 hrs
22
High Temperature
Storage Test
1.Ta=105 ℃± 5℃
2.t=500 hrs
22
Low Temperature
Storage Test
1.Ta=-40 ℃±5℃
2.t=1000 hrs
22
High Temperature
High Humidity
Storage Test
1.IR-Reflow In-Board, 2 Times
2.Ta= 85℃± 5℃
3.RH=90 %~95%
4.t=500 hrs±2hrs
22
1.IR-Reflow In-Board,2 times
2.Ta=105 ℃ ±5℃ &
-40 ℃± 5℃
( 30min) (30min)
3.total 100 cycles
22
1.T.Sol=260 ℃±5℃
2.Dwell Time= 10 Max.
22
1.105 ℃ ~ 25℃ ~ - 40℃
30mins 15mins 30mins
2.10 0 Cyeles
22
Endurance
Test
Thermal Shock Test
Environmental
Test
Reflow Soldering Test
Temperature
Cycling
(2)Criteria for judging the damage
Item
Symbol Test Conditions
Criteria for Judgement
Min.
Max.
Forward Voltage
Vf
If=60mA
-
U.S.L x1.2
Reverse Current
Ir
Vr=5V
-
U.S.L x2.0
Luminous Intensity
Iv
If=60mA
L.S.L x 0.5
-
Page 14/15
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Precautions For Use:
Storage time:
1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%.
2.Once the package is opened, the products should be used within a week.
Otherwise, they should be kept in a damp proof box with descanting agent.
Considering the tape life, we suggest our customers to use our products within
a year(from production date).
3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%,
they should be treated at 60 ℃±5 ℃for 15hrs.
Drive Method:
LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into
the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series
with the LED.
Consider worst case voltage variations than could occur across the current limiting resistor. The forward
current should not be allowed to change by more than 40% of its desired value.
Circuit model A
Circuit model B
LED
LED
(A) Recommended circuit.
(B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
Cleaning:
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
ESD(Electrostatic Discharge):
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
Page 15/15
Similar pages