GOOD-ARK GDSSF2305 General feature Datasheet

GDSSF2305
D
DESCRIPTION
The SSF2305 uses advanced trench technology to
provide excellent RDS(ON), low gate charge and operation
with gate voltages as low as 0.5V. This device is suitable
for use as a load switch or in PWM applications.
G
S
GENERAL FEATURES
Schematic diagram
● VDS = -20V,ID = -3A
RDS(ON) < 114mΩ @ VGS=-2.5V
RDS(ON) < 89mΩ @ VGS=-4.5V
● High Power and current handing capability
● Lead free product is acquired
● Surface Mount Package
Marking and pin Assignment
Application
●PWM applications
●Load switch
●Power management
SOT23 top view
PACKAGE MARKING AND ORDERING INFORMATION
Device Marking
Device
Device Package
Reel Size
2305
SSF2305
SOT23
-
ABSOLUTE MAXIMUM RATINGS(TA=25℃unless otherwise noted)
Parameter
Symbol
Tape width
Quantity
-
-
Limit
Unit
Drain-Source Voltage
VDS
-20
V
Gate-Source Voltage
VGS
±12
V
ID(25℃)
-3
A
ID(70℃)
-1.8
A
IDM
-10
A
PD
1.25
W
TJ,TSTG
-55 To 150
℃
RθJA
100
℃/W
Drain Current-Continuous@ Current-Pulsed (Note 1)
Maximum Power Dissipation
Operating Junction and Storage Temperature Range
THERMAL CHARACTERISTICS
Thermal Resistance,Junction-to-Ambient (Note 2)
Suzhou Goodark Electronics Co., Ltd
Version 1.0
GDSSF2305
ELECTRICAL CHARACTERISTICS (TA=25℃unless otherwise noted)
Parameter
Symbol
Condition
Min
Typ
Max
Unit
OFF CHARACTERISTICS
Drain-Source Breakdown Voltage
BVDSS
VGS=0V ID=-250μA
-20
V
Zero Gate Voltage Drain Current
IDSS
VDS=-20V,VGS=0V
-1
μA
Gate-Body Leakage Current
IGSS
VGS=±12V,VDS=0V
±100
nA
Gate Threshold Voltage
VGS(th)
VDS=VGS,ID=-250μA
-1
V
Drain-Source On-State Resistance
RDS(ON)
ON CHARACTERISTICS (Note 3)
Forward Transconductance
gFS
-0.5
VGS=-4.5V, ID=-3A
62
89
VGS=-2.5V, ID=-2A
88
114
VDS=-5V,ID=-3A
7
S
1160
PF
210
PF
PF
mΩ
DYNAMIC CHARACTERISTICS (Note4)
Input Capacitance
Clss
VDS=-10V,VGS=0V,
F=1.0MHz
Output Capacitance
Coss
Reverse Transfer Capacitance
Crss
125
Turn-on Delay Time
td(on)
13.6
27.2
nS
Turn-on Rise Time
tr
8.6
17.2
nS
73.6
147.2
nS
SWITCHING CHARACTERISTICS (Note 4)
Turn-Off Delay Time
td(off)
VDD=-10V,ID=-3A
VGS=-4.5V,RGEN=3Ω
Turn-Off Fall Time
tf
34.6
69.2
nS
Total Gate Charge
Qg
9.6
12.7
nC
Gate-Source Charge
Qgs
Gate-Drain Charge
Qgd
VDS=-10V,ID=-3A,VGS=-4.5V
1.1
nC
2.6
nC
DRAIN-SOURCE DIODE CHARACTERISTICS
Diode Forward Voltage (Note 3)
VSD
VGS=0V,IS=-1A
-1.2
NOTES:
1. Repetitive Rating: Pulse width limited by maximum junction temperature.
2. Surface Mounted on 1in2 FR4 Board, t ≤ 10 sec.
3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%.
4. Guaranteed by design, not subject to production testing.
Suzhou Goodark Electronics Co., Ltd
Version 1.0
V
GDSSF2305
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
Figure 2:Switching Waveforms
PD Power(W)
-ID- Drain Current (A)
Figure 1:Switching Test Circuit
TJ-Junction Temperature(℃)
TJ-Junction Temperature(℃)
Figure 3 Power Dissipation
-ID- Drain Current (A)
Rdson On-Resistance(mΩ)
Figure 4 Drain Current
-Vds Drain-Source Voltage (V)
Figure 5 Output CHARACTERISTICS
Suzhou Goodark Electronics Co., Ltd
-ID- Drain Current (A)
Figure 6 Drain-Source On-Resistance
Version 1.0
-ID- Drain Current (A)
Normalized On-Resistance
GDSSF2305
TJ-Junction Temperature(℃)
Figure 7 Transfer Characteristics
Figure 8 Drain-Source On-Resistance
C Capacitance (pF)
Rdson On-Resistance(mΩ)
-Vgs Gate-Source Voltage (V)
-Vds Drain-Source Voltage (V)
Figure 9 Rdson vs Vgs
Figure 10 Capacitance vs Vds
-Is- Reverse Drain Current (A)
-Vgs Gate-Source Voltage (V)
-Vgs Gate-Source Voltage (V)
Qg Gate Charge (nC)
Figure 11 Gate Charge
Suzhou Goodark Electronics Co., Ltd
-Vsd Source-Drain Voltage (V)
Figure 12 Source- Drain Diode Forward
Version 1.0
-ID- Drain Current (A)
GDSSF2305
Vds Drain-Source Voltage (V)
R(t),Normalized Effective
Transient Thermal Impedance
Figure 13 Safe Operation Area
Square Wave Pluse Duration(sec)
Figure 14 Normalized Maximum Transient Thermal Impedance
Suzhou Goodark Electronics Co., Ltd
Version 1.0
GDSSF2305
SOT-23 PACKAGE INFORMATION
Dimensions in Millimeters (UNIT:mm)
Symbol
A
A1
A2
b
c
D
E
E1
e
e1
L
L1
θ
Dimensions in Millimeters
MIN.
MAX.
0.900
1.150
0.000
0.100
0.900
1.050
0.300
0.500
0.080
0.150
2.800
3.000
1.200
1.400
2.250
2.550
0.950TYP
1.800
2.000
0.550REF
0.300
0.500
0°
8°
NOTES
1. All dimensions are in millimeters.
2. Tolerance ±0.10mm (4 mil) unless otherwise specified
3. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 5 mils.
4. Dimension L is measured in gauge plane.
5. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
Suzhou Goodark Electronics Co., Ltd
Version 1.0
Similar pages