HP HLMP-4719B0B00 T-13/4 (5 mm), t-1 (3 mm), low current led lamp Datasheet

T-13/4 (5 mm), T-1 (3 mm), Low
Current LED Lamps
Technical Data
HLMP-4700, -4719, -4740
HLMP-1700, -1719, -1790
Features
• Low Power
• High Efficiency
• CMOS-MOS Compatible
• TTL Compatible
• Wide Viewing Angle
• Choice of Package Styles
• Choice of Colors
Applications
• Portable Equipment
• Keyboard Indicators
Description
These tinted diffused LED lamps
are designed and optimized
specifically for low DC current
operation. Luminous intensity and
forward voltage are tested at
2 mA to assure consistent brightness at TTL output current levels.
• Low Power DC Circuits
• Telecommunications
Indicators
Package Dimensions
HLMP-7000, -7019, -7040
HLMP-4700, -4719, -4740
A
HLMP-1700, -1719, -1790
B
2
Selection Guide
Package Description
T-1 3/4 Tinted Diffused
T-1 Tinted Diffused
Luminous Intensity Iv
(mcd) at 2 mA
Min.
Typ.
Max.
1.5
2.3
–
Color
Red
Device HLMP4700
Yellow
4700-C00xx
4700-CD0FH
4719
1.5
1.5
0.9
2.3
2.3
2.1
–
4.2
–
Green
4719-A00xx
4740
0.9
1.0
2.1
2.3
–
–
Red
4740-A00xx
4740-AB000
1700
1.0
1.0
0.8
2.3
2.3
2.1
–
3.2
–
Yellow
1700-B00xx
1719
0.8
0.9
2.1
2.1
–
–
Green
1719-A00xx
1719-ABB00
1790
0.9
0.9
1.0
2.1
2.1
2.3
–
2.8
–
1790-A00xx
1790-AB0FH
1.0
1.0
2.3
2.4
–
3.2
Note:
1. θ1/2 is the typical off-axis angle at which the luminous intensity is half the axial luminous intensity.
2θ1/2
50
Package
Outline
A
50
B
3
Part Numbering System
HLMP-X
7 XX - X
X X
XX
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02, BH: Tape & Reel, Straight Leads
A1, B1: Right Angle Housing, Uneven Leads
A2, B2: Right Angle Housing, Even Leads
FH: 2 Iv bins select with Inventory Control
Color Bin Options
0: Full color bin distribution
B: Color bins 2 & 3 only
Maximum Iv Bin Options
0: Open (No. max. limit)
Others: Please refer to the Iv bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Color Option
00: GaP HER
19: GaP Yellow
40: GaP Green
90: GaP Green
Package Options
4: T-13/4 (5 mm)
1: T-1 (3 mm)
4
Electrical/Optical Characteristics at TA = 25°C
Symbol
Description
T-13/4
T-1
Min.
Test
Conditions
Typ.
Max.
Units
1.7
1.8
1.9
2.0
2.5
2.2
V
2 mA
V
IR = 50 µA
VF
Forward Voltage
4700
4719
4740
1700
1719
1790
VR
Reverse Breakdown
Voltage
4700
4719
4740
1700
1719
1790
λd
Dominant
Wavelength
4700
4719
4740
1700
1719
1790
626
585
569
nm
Spectral Line
Halfwidth
4700
4719
4740
1700
1719
1790
40
36
28
nm
τS
Speed of Response
4700
4719
4740
1700
1719
1790
90
90
500
ns
C
Capacitance
4700
4719
4740
1700
1719
1790
11
15
18
pF
RθJ-PIN
Thermal
Resistance
4700
4719
4740
1700
1719
1790
260[3]
290[4]
°C/W
Junction to
Cathode Lead
λPEAK
Peak Wavelength
4700
4719
4740
1700
1719
1790
635
583
565
nm
Measurement
at peak
Luminous Efficacy
4700
4719
4740
1700
1719
1790
145
500
595
lumens
watt
∆λ1/2
ηV
5.0
5.0
5.0
Note 1
VF = 0,
f = 1 MHz
Note 2
Notes:
1. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
2. The radiant intensity, Ie, in watts per steradian, may be found from the equation I e = IV/ηV, where IV is the luminous intensity in
candelas and ηV is luminous efficacy in lumens/watt.
3. T-13/4.
4. T-1.
5
Absolute Maximum Ratings
Parameter
Maximum Rating
Power Dissipation
(Derate linearly from 92°C at 1.0 mA/°C)
Red
Yellow
Green
24
36
24
DC and Peak Forward Current
Transient Forward Current (10 µs
Pulse)[1]
Reverse Voltage (IR = 50 µA)
Operating Temperature Range
Red/Yellow
Green
Storage Temperature Range
Units
mW
7
mA
500
mA
5.0
V
-55°C to 100°C
-20°C to 100°C
-55°C to +100°C
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body]
260°C for 5 seconds
Note:
1. The transient peak current is the maximum non-recurring peak current the devices can withstand without damaging the LED die and
wire bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current.
Figure 1. Relative Intensity vs. Wavelength.
10
DC CURRENT – mA
8
RED
6
YELLOW
GREEN
4
2
0
0
0.5
1.0
1.5
2.0
2.5
VOLTAGE – V
Figure 2. Forward Current vs. Forward Voltage.
Figure 3. Relative Luminous Intensity vs. Forward Current.
6
Figure 4. Relative Luminous Intensity vs. Angular
Displacement for T-1 3/4 Lamp.
Figure 5. Relative Luminous Intensity vs. Angular
Displacement for T-1 Lamp.
Intensity Bin Limits
Color
Red
Bin
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Intensity Range (mcd)
Min.
Max.
0.9
1.5
1.5
2.4
2.4
3.8
3.8
6.1
6.1
9.7
9.7
15.5
15.5
24.8
24.8
39.6
39.6
63.4
63.4
101.5
101.5
162.4
162.4
234.6
234.6
340.0
340.0
540.0
540.0
850.0
850.0
1200.0
1200.0
1700.0
1700.0
2400.0
2400.0
3400.0
3400.0
4900.0
4900.0
7100.0
7100.0
10200.0
10200.0
14800.0
14800.0
21400.0
21400.0
30900.0
Maximum tolerance for each bin limit is ± 18%.
7
Intensity Bin Limits, continued
Color
Yellow
Bin
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
Intensity Range (mcd)
Min.
Max.
1.0
1.6
1.6
2.5
2.5
4.0
4.0
6.5
6.5
10.3
10.3
16.6
16.6
26.5
26.5
42.3
42.3
67.7
67.7
108.2
108.2
173.2
173.2
250.0
250.0
360.0
360.0
510.0
510.0
800.0
800.0
1250.0
1250.0
1800.0
1800.0
2900.0
2900.0
4700.0
4700.0
7200.0
7200.0
11700.0
11700.0
18000.0
18000.0
27000.0
Maximum tolerance for each bin limit is ± 18%.
8
Intensity Bin Limits, continued
Color
Green
Bin
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
Intensity Range (mcd)
Min.
Max.
1.1
1.8
1.8
2.9
2.9
4.7
4.7
7.6
7.6
12.0
12.0
19.1
19.1
30.7
30.7
49.1
49.1
78.5
78.5
125.7
125.7
201.1
201.1
289.0
289.0
417.0
417.0
680.0
680.0
1100.0
1100.0
1800.0
1800.0
2700.0
2700.0
4300.0
4300.0
6800.0
6800.0
10800.0
10800.0
16000.0
16000.0
25000.0
25000.0
40000.0
Maximum tolerance for each bin limit is ± 18%.
9
Color Categories
Color
Category #
6
5
4
3
2
1
3
2
4
5
Green
Yellow
Lambda (nm)
Min.
Max.
561.5
564.5
564.5
567.5
567.5
570.5
570.5
573.5
573.5
576.5
582.0
584.5
584.5
587.0
587.0
589.5
589.5
592.0
592.0
593.0
Tolerance for each bin limit is ± 0.5 nm.
Mechanical Option Matrix
Mechanical Option Code
Definition
00
Bulk Packaging, minimum increment 500 pcs/bag
01
Tape & Reel, crimped leads, min. increment 1300 pcs/bag for T-1 3/4, 1800
pcs/bag for T-1
02
Tape & Reel, straight leads, min. increment 1300 pcs/bag for T-1 3/4, 1800
pcs/bag for T-1
A1
T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
A2
T-1, Right Angle Housing, even leads, minimum increment 500 pcs/bag
B1
T-1 3/4, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
B2
T-1 3/4, Right Angle Housing, even leads, minimum increment 500 pcs/bag
BH
T-1, Tape & Reel, straight leads, minimum increment 2000 pcs/bag
FH
Devices that require inventory control and 2 Iv bin select
R1
Tape & Reel, crimped leads, reeled counter clockwise, cathode lead leaving
the reel first
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2003 Agilent Technologies, Inc.
September 10, 2003
5988-8054EN
Similar pages