Lumileds MXZ8-PW22 A compact footprint delivering high efficacy and just the right amount of light Datasheet

ILLUMINATION
For NEW designs consider
this replacement product:
N
O O
R L
D O
ER N
G
A E
B R
LE
• LUXEON 3014
LUXEON 4014
A compact footprint delivering high
efficacy and just the right amount of light
LUXEON 4014 is a 2.9V low-power product, the first of its kind from
Lumileds. It is a compact QFN 4.0mm x 1.4mm x 0.7mm package that
delivers the Quality of Light needed for indoor lighting applications.
LUXEON 4014 offers an ideal solution when uniformity and a smooth
lighting appearance are critical in luminaire designs.
FEATURES AND BENEFITS
PRIMARY APPLICATIONS
Rectangular QFN package design increases uniformity
Indoor Area Lighting
Superior heat dissipation enables cost effective design
Unique phosphor technology enables high efficacy
1/6th ANSI color binning for tight color control
Superior heat dissipation enables cost effective thermal design
RoHS
COMPLIANT
DS205 LUXEON 4014 Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
N
O O
R L
D O
ER N
G
A E
B R
LE
Product Performance and Characterization Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Material Information & Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Typical Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
i
General Information
Product Nomenclature
LUXEON 4014 is tested and binned at Tj = 25°C and 30mA DC.
The part number designation is explained as follows:
N
O O
R L
D O
ER N
G
A E
B R
LE
MXZA–BCDD–00EE
Where:
A
—
designates minimum CRI (value 8 for 80, 9 for 90)
B
—
designates radiation pattern (value P for Lambertian)
C
—
designates color (W for White)
DD
—
designates nominal CCT (27 for 2700K, 30 for 3000K, 35 for 3500K, 40 for 4000K and
50 for 5000K)
EEEE —
designates additional part numbers
Therefore 4000K, 80CRI LUXEON 4014 product will be:
MXZ8–PW40–0000
Average Lumen Maintenance Characteristics
The LUXEON 4014 is being tested in accordance with LM-80 standards. Please contact your Lumileds TSM or sales
person for more detailed information.
Environmental Compliance
Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON
4014 is compliant to the European Union directives on the restriction of hazardous substances in electronic
equipment, namely the RoHS and REACH directives. Lumileds will not intentionally add the following restricted
material to the LUXEON 4014: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE).
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
2
Product Performance and Characterization Guide
Typical Product Characteristics at 30mA and 60mA
Table 1. Performance Characteristics at Tj = 25˚C, If
Minimum
CRI
Part Number
Luminous Flux @ 30mA, 25°C
Luminous Flux @ 60mA, 25°C
Vf at 30mA
Minimum (lm)
Typical (lm)
Minimum (lm)
Typical (lm)
Typical
N
O O
R L
D O
ER N
G
A E
B R
LE
Nominal
CCT
5000K
MXZ7-PW50
70
10.0
13.0
18
23
2.9
5700K
MXZ7-PW57
70
10.0
13.0
18
23
2.9
6500K
MXZ7-PW65
70
10.0
13.0
18
23
2.9
2200K
MXZ8-PW22
80
8.5
9.7
14
17
2.9
2500K
MXZ8-PW25
80
8.5
10.2
14
17
2.9
2700K
MXZ8-PW27
80
8.5
10.5
15
18
2.9
3000K
MXZ8-PW30
80
8.5
11.0
15
20
2.9
3500K
MXZ8-PW35
80
9.0
11.0
16
20
2.9
4000K
MXZ8-PW40
80
10.0
12.0
18
22
2.9
5000K
MXZ8-PW50
80
10.0
12.0
18
22
2.9
5700K
MXZ8-PW57
80
9.5
11.5
17
20
2.9
6500K
MXZ8-PW65
80
9.5
11.5
17
20
2.9
2700K
MXZ9-PW27
90
8.5
9.0
14
17
2.9
3000K
MXZ9-PW30
90
8.5
9.3
14
17
2.9
4000K
MXZ9-PW40
90 typ.
10.0
11.1
17
20
2.9
5000K
MXZ9-PW50
90 typ.
10.0
11.1
17
20
2.9
Notes for Table 1:
1. Lumileds maintains a tolerance of ±7.5% on luminous flux, ±2 on CRI.
2. Production parts are binned at 30mA, 25°C.
3. Performance at 60mA, 25°C is for reference only.
Electrical Characteristics
Electrical Characteristics of Low-Power LEDs
Solder Pad Temperature = 25°C, Test Current = 30mA
Table 2.
Forward Voltage Vf [1] (V)
Part
Numbers
MXZx-PWXX
Minimum
Typical
Maximum
Typ. Temperature Coefficient
of Forward Voltage [2] (mV/°C)
DVf / DTJ
2.7
2.9
3.2
-1.6
Typical Thermal Resistance
Junction to Solder Pad (°C/W)
Ru J-C
45
Notes for Table 2:
1. Lumileds maintains a tolerance of ± 0.10V on forward voltage measurements.
2. Measured between Tj = 25°C and Tj = 110°C.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
3
Absolute Maximum Ratings
Table 3. Operating Condition and Ratings
Parameter
Maximum Performance
DC Forward Current
90mA
[1]
Peak Pulsed Forward Current [2]
100mA
Soldering Temperature
260°C
3
ESD Sensitivity
[ 2000V Human Body Model (HBM) Class 2 JEDEC JS-001-2012
400V Machine Model (MM) Class C JESD22-A115C
Storage Temperature
-40°C - 85°C
N
O O
R L
D O
ER N
G
A E
B R
LE
Allowable Reflow Cycles
LED Junction Temperature
125°C
Operating Case Temperature
85°C
Reverse Voltage (Vr) [3] [4]
-5V
Notes for Table 3:
1. Ripple current with a frequency of 50-150 Hz is allowed, as long as the average of the current waveform is below 80mA, and the maximum of the current waveform is lower than 100mA.
2. At 10% duty cycle and pulse width 10mS.
3. LUXEON low-power LEDs are not designed to be driven in reverse bias.
4. At maximum reverse current of 10 μA.
JEDEC Moisture Sensitivity
Table 4.
2
Soak Requirements
Floor Life
Level
Standard
Time
Conditions
Time
Conditions
1 year
[ 30°C / 60% RH
168 Hrs. + 5 / -0 Hrs.
[ 85°C / 60% RH
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
4
Reflow Soldering Characteristics
300
Tp: 260°C
260°C +0/-5°C
250
Ramp-Up Rate, 3°C/sec. max.
255°C +5/-0°C
TL: 217°C
Tsmax : 200°C
N
O O
R L
D O
ER N
G
A E
B R
LE
Temperature ( C)
200
tp: 10-30sec. 30sec max.
Tsmin: 150°C
150
ts : 60-120sec.
tL: 60-150 sec,max
100
50
0
0
50
100
150
200
250
300
Time (seconds)
Temperature Profile for Table 5.
Table 5. Reflow Profile in Accordance with J-Std-020D.
Profile Feature
Lead Free Assembly
Preheat/Soak :
Temperature Min (Tsmin)
Temperature Max (Tsmax)
Maximum Time (ts) from Tsmin to Tsmax
150°C
200°C
120 seconds
Ramp-up Rate (TL to Tp )
3°C / second
Liquidous Temperature (TL )
217°C
Maximum Time (tL ) Maintained above TL
150 seconds
Maximum Peak Package Body Temperature (Tp )
260°C
Time (tp ) within 5°C of the specified temperature (Tc )
10-30 seconds
Maximum Ramp-Down Rate (Tp to TL )
6°C / second
Maximum Time 25°C to Peak Temperature
8 minutes
Note for Table 5:
1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
5
Material Information & Mechanical Dimensions
MXZx-PWxx
Table 6. Material Information
Specification
Lead Frame Base:
Copper Alloy
Reflector Plating:
Ni/Ag
Electrode Plating:
Ni/Ag
Package Body:
High Temperature Thermal Plastic
Encapsulant:
Silicone Resin, with Phosphor
LED Chip:
InGaN
N
O O
R L
D O
ER N
G
A E
B R
LE
Material/Component
+/- 0.05
Anode
Cathode
Cathode Marker
Figure 1. Package outline dimensions.
Notes for Figure 1:
1. All dimensions are in millimeters.
2. General tolerance +/- 0.10.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
6
Characteristic Curves
N
O O
R L
D O
ER N
G
A E
B R
LE
Relative Spectral Distribution vs. Wavelength
Junction Temperature at 25°C; Test Current = 30mA
Figure 2. Emission color spectrum for MXZ7-PWxx
Relative Spectral Distribution vs. Wavelength
Junction Temperature at 25°C; Test Current = 30mA
Figure 3. Emission color spectrum for MXZ8-PWxx.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
7
Characteristic Curves, Continued
N
O O
R L
D O
ER N
G
A E
B R
LE
Relative Spectral Distribution vs. Wavelength
Junction Temperature at 25°C; Test Current = 30mA
Figure 4. Emission color spectrum for MXZ9-PWxx.
Relative Light Output Characteristics over Temperature
Test Current = 30mA
Figure 5. Relative light output vs. junction temperature for MXZx-PWxx.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
8
Typical Forward Current
N
O O
R L
D O
ER N
G
A E
B R
LE
Junction Temperature at 25°C
Figure 6. Forward current vs. forward voltage for MXZx-PWxx.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
9
Light Output Characteristics
N
O O
R L
D O
ER N
G
A E
B R
LE
Relative Light Output Characteristics over Forward Current
Junction Temperature at 25°C
Figure 7. Light output vs. forward current for MXZx-PWxx.
Typical Relative Efficiency vs. Forward Current
Junction Temperature at 25°C
Figure 8. Typical relative efficiency vs. forward current for MXZx-PWxx.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
10
Typical Radiation Patterns
N
O O
R L
D O
ER N
G
A E
B R
LE
Junction Temperature at 25°C
Figure 9. Radiation pattern for MXZx-PWxx.
Polar Radiation Pattern, Junction Temperature at 25°C
Figure 10. Radiation pattern in polar for MXZx-PWxx.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
11
N
O O
R L
D O
ER N
G
A E
B R
LE
Emitter Pocket Tape Packaging
Figure 11. Emitter pocket tape packaging.
Notes for Figure 11:
1. All dimensions are in millimeters.
2. Empty component pockets sealed with top cover tape.
3. The maximum number of consecutive missing LEDs is two.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
12
Emitter Reel Packaging
N
O O
R L
D O
ER N
G
A E
B R
LE
18.4 max
2.0 +0.5/-0.0
180.0 ±0.5
62.5 +0/-2.5
Ø24.0 ±0.5
PART NO:
LOT NO:
MXM8-PW40-5601
Ø13.0 ±0.2
090430-0136959718
QUANTITY: 1998
CAT CODE:
L56X
DATE CODE:
1205
12.4 +2/-0
Figure 12. Emitter reel packaging.
Notes for Figure 12:
1. All dimentions are in millimeters.
2. Empty component pockets sealed with top cover tape.
3. 7 inch reel-3000 pieces per reel.
4. Minimum packing quantity is 1000 pieces.
5. The maximum number of consecutive missing LEDs is two.
6. In accordance with EIA-481-1-B specification.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
13
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of LED products, there is a distribution of performance around the typical values given in the
technical data sheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward
voltage (Vf).
N
O O
R L
D O
ER N
G
A E
B R
LE
Decoding Product Bin Labeling
LUXEON 4014 emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for
emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination.
Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given
application.
Reels of 2700K, 3000K, 3500K, 4000K, 5000K, 6500K emitters are labeled with a four digit alphanumeric CAT code
following the format below.
ABCD
A=
Flux bin (L etc.)
B and C =
D=
Color bin (For example 93, A1, 5L or 5M)
Vf bin
Luminous Flux and Forward Voltage Bins
Tables 7 and 8 list the standard photometric luminous flux bins for LUXEON 4014 emitters (tested and binned at
30mA). Although several bins are outlined, product availability in a particular bin varies by production run and by
product performance. Not all bins are available in all colors.
Table 7. Flux Bins
Bin Code
Minimum Photometric Flux
(lm)
Maximum Photometric Flux
(lm)
10.0
A
8.5
B
10.0
11.5
C
11.5
13.0
D
13.0
15.0
E
15.0
18.0
Bin Code
Minimum Forward Voltage
(V)
Maximum Forward Voltage
(V)
S
2.7
2.8
Tested and binned at 25°C, If=30mA. Tester tolerance: ±7.5%.
Table 8. Vf Bins
T
2.8
2.9
V
2.9
3.0
W
3.0
3.1
X
3.1
3.2
Tested and binned at 25°C, If=30mA. Tester tolerance: ±0.10V.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
14
Color Bin Structure
MXZ8-PW22 1/6th Color Bin Structure
0.450
N
O O
R L
D O
ER N
G
A E
B R
LE
0.440
0.430
A1
A3
A5
y
0.420
A2
0.410
A4
A6
0.400
0.390
0.380
0.475
0.485
0.495
0.505
0.515
0.525
0.535
x
Figure 13. 2200K 1/6th ANSI color bin structure.
LUXEON 4014 emitters are tested and binned by x,y coordinates.
Table 9.
LUXEON 4014 1/6th ANSI Color Bin Coordinates for MXZ8-PW22-0000 Emitter
Bin Code
x
y
Bin Code
x
y
A1
0.5178
0.5262
0.5154
0.5075
0.4362
0.4381
0.4194
0.4176
A4
0.4996
0.5075
0.4972
0.4897
0.4158
0.4176
0.3990
0.3974
A2
0.5075
0.5154
0.5046
0.4972
0.4176
0.4194
0.4007
0.3990
A5
0.5010
0.5094
0.4996
0.4917
0.4323
0.4343
0.4158
0.4140
A3
0.5094
0.5178
0.5075
0.4996
0.4343
0.4362
0.4176
0.4158
A6
0.4917
0.4996
0.4897
0.4823
0.4140
0.4158
0.3974
0.3957
Notes for Figure 13 and Table 9:
1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
15
Color Bin Structure
MXZ8-PW25 1/6th Color Bin Structure
0.455
N
O O
R L
D O
ER N
G
A E
B R
LE
0.445
0.435
2500K
0.425
y
91
93
95
0.415
0.405
92
94
96
0.395
0.385
0.375
0.450
0.460
0.470
0.480
0.490
0.500
0.510
0.520
x
Figure 14. 2500K 1/6th ANSI color bin structure.
LUXEON 4014 emitters are tested and binned by x,y coordinates.
Table 10.
LUXEON 4014 1/6th ANSI Color Bin Coordinates for MXZ8-PW25-0000 Emitter
Bin Code
x
y
Bin Code
x
y
91
0.4944
0.5010
0.4917
0.4845
0.4322
0.4323
0.4140
0.4137
94
0.4774
0.4845
0.4746
0.4670
0.4134
0.4137
0.3952
0.3948
92
0.4845
0.4917
0.4823
0.4746
0.4137
0.4140
0.3957
0.3952
95
0.4813
0.4879
0.4774
0.4703
0.4319
0.4320
0.4134
0.4132
93
0.4879
0.4944
0.4845
0.4774
0.4320
0.4322
0.4137
0.4134
96
0.4703
0.4774
0.4670
0.4593
0.4132
0.4134
0.3948
0.3944
Notes for Figure 14 and Table 10:
1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
16
Color Bin Structure
MXZx-PW27 1/9th Color Bin Structure
82
0.450
N
O O
R L
D O
ER N
G
A E
B R
LE
0.440
0.430
8J
8K
0.420
8F
8E
y
0.410
8D
8G
8H
0.400
8L
8M
2580
0.390
2870K
0.380
0.370
0.430
0.435
0.440
0.445
0.450
0.455
0.460
0.465
0.470
0.475
0.480
0.485
0.490
x
Figure 15. 2700K 1/9th ANSI color bin structure.
LUXEON 4014 emitters are tested and binned by x,y coordinates.
Table 11.
Nominal
ANSI CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle (degrees)
2700K
Single 3-step MacAdam ellipse
(0.4578, 0.4101)
2700K
Single 5-step MacAdam ellipse
(0.4578, 0.4101)
0.00810
0.00420
53.70
0.01350
0.00700
53.70
Notes for Figure 15 and Table 11:
1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
17
Color Bin Structure
MXZx-PW30 1/9th Color Bin Structure
0.445
N
O O
R L
D O
ER N
G
A E
B R
LE
0.435
0.425
7K
0.415
7J
y
7E
7F
0.405
7D
0.395
7G
7H
7L
7M
2870K
0.385
3200K
0.375
0.365
0.405
0.410
0.415
0.420
0.425
0.430
0.435
0.440
0.445
0.450
0.455
0.460
0.465
x
Figure 16. 3000K 1/9th ANSI color bin structure.
LUXEON 4014 emitters are tested and binned by x,y coordinates.
Table 12.
Nominal
ANSI CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle (degrees)
3000K
Single 3-step MacAdam ellipse
(0.4338, 0.403)
3000K
Single 5-step MacAdam ellipse
(0.4338, 0.403)
0.00834
0.00408
53.22
0.01390
0.00680
53.22
Notes for Figure 16 and Table 12:
1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
18
Color Bin Structure
MXZx-PW35 1/9th Color Bin Structure
0.430
N
O O
R L
D O
ER N
G
A E
B R
LE
0.420
0.410
6K
0.400
6F
6J
y
6D
6E
0.390
6G
6L
6H
0.380
3250K
6M
0.370
3750K
0.360
0.380
0.385
0.390
0.395
0.400
0.405
0.410
0.415
0.420
0.425
0.430
0.435
0.440
x
Figure 17. 3500K 1/9th ANSI color bin structure.
LUXEON 4014 emitters are tested and binned by x,y coordinates.
Table 13.
Nominal
ANSI CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle (degrees)
3500K
Single 3-step MacAdam ellipse
(0.4073, 0.3917)
3500K
Single 5-step MacAdam ellipse
(0.4073, 0.3917)
0.00927
0.00414
54.00
0.01545
0.00690
54.00
Notes for Figure 17 and Table 13:
1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
19
Color Bin Structure
MXZx-PW40 1/9th Color Bin Structure
52
0.420
N
O O
R L
D O
ER N
G
A E
B R
LE
0.410
0.400
5K
0.390
y
5F
5J
5E
5D
0.380
5L
5G
0.370
5H
3750K
5M
0.360
4250K
0.350
0.340
0.360
0.365
0.370
0.375
0.380
0.385
0.390
0.395
0.400
0.405
0.410
x
Figure 18. 4000K 1/9th ANSI color bin structure.
LUXEON 4014 emitters are tested and binned by x,y coordinates.
Table 14.
Nominal
ANSI CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle (degrees)
4000K
Single 3-step MacAdam ellipse
(0.3818, 0.3797)
4000K
Single 5-step MacAdam ellipse
(0.3818, 0.3797)
0.00939
0.00402
53.72
0.01565
0.00670
53.72
Notes for Figure 18 and Table 14:
1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
20
Color Bin Structure
MXZx-PW50 1/9th Color Bin Structure
36
0.390
N
O O
R L
D O
ER N
G
A E
B R
LE
0.380
3K
0.370
3F
3J
0.360
3G
3E
3D
y
0.350
3L
3H
4750K
3M
0.340
5250K
0.330
0.320
0.325
0.330
0.335
0.340
0.345
0.350
0.355
0.360
0.365
x
Figure 19. 5000K 1/9th ANSI color bin structure.
LUXEON 4014 emitters are tested and binned by x,y coordinates.
Table 15.
Nominal
ANSI CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle (degrees)
5000K
Single 3-step MacAdam ellipse
(0.3447, 0.3553)
5000K
Single 5-step MacAdam ellipse
(0.3447, 0.3553)
0.00822
0.00354
59.62
0.01370
0.00590
59.62
Notes for Figure 19 and Table 15:
1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
21
Color Bin Structure
MXZx-PW57 1/9th Color Bin Structure
21
24
0.370
N
O O
R L
D O
ER N
G
A E
B R
LE
0.360
2K
0.350
2F
2J
2G
2E
y
2D
0.340
2L
5250K
2H
0.330
2M
6000K
0.320
0.310
0.310
0.315
0.320
0.325
0.330
0.335
0.340
0.345
0.350
x
Figure 20. 5700K ANSI 1/9th color bin structure.
LUXEON 4014 emitters are tested and binned by x,y coordinates.
Table 16.
Nominal
ANSI CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle (degrees)
5700K
Single 3-step MacAdam ellipse
(0.3287, 0.3417)
0.00746
0.00320
59.09
5700K
Single 5-step MacAdam ellipse
(0.3287, 0.3417)
0.01243
0.00533
59.09
Notes for Figure 20 and Table 16:
1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
22
Color Bin Structure
MXZx-PW65 1/9th ColorBin Structure
0.365
N
O O
R L
D O
ER N
G
A E
B R
LE
0.355
0.345
1K
1F
0.335
y
1J
1G
1D
1E
1L
0.325
6000K
1H
1M
0.315
7000K
0.305
0.295
0.290
0.295
0.300
0.305
0.310
0.315
0.320
0.325
0.330
0.335
x
Figure 21. 6500K 1/9th ANSI color bin structure.
LUXEON 4014 emitters are tested and binned by x,y coordinates.
Table 17.
Nominal
ANSI CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle (degrees)
6500K
Single 3-step MacAdam ellipse
(0.3123, 0.3282)
0.00669
0.00285
58.57
6500K
Single 5-step MacAdam ellipse
(0.3123, 0.3282)
0.01115
0.00475
58.57
Notes for Figure 21 and Table 17:
1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates.
DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved.
23
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
N
O O
R L
D O
ER N
G
A E
B R
LE
To learn more about our portfolio of light engines visit lumileds.com.
©2016 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
DS205 LUXEON 4014
Product Datasheet 20160620
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or
any other damages, direct, indirect or consequential, resulting from the use of the provided
information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to
provide the most accurate information and data, the materials and services information and data
are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees
the contents and correctness of the provided information and data. Lumileds Holding B.V. and its
affiliates reserve the right to make changes without notice. You as user agree to this disclaimer
and user agreement with the download or use of the provided materials, information and data.