JMNIC BAP70AM 2015 Silicon pin diode array Datasheet

BAP70AM
Silicon PIN diode array
Rev. 01 — 20 November 2006
Product data sheet
1. Product profile
1.1 General description
Four planar PIN diode array in SOT363 small SMD plastic package.
1.2 Features
n
n
n
n
High voltage current controlled RF resistor for RF attenuators
Low diode capacitance
Very low series inductance
Low distortion
1.3 Applications
n RF attenuators
n (SAT) TV applications
n Car radio applications
2. Pinning information
Table 1.
Discrete pinning
Pin
Description
1
anode diode 1
Simplified outline
2
cathode diode 2
3
anode diode 3 / cathode diode 4
4
anode diode 4
5
cathode diode 3
6
anode diode 2 / cathode diode 1
Symbol
6
5
4
6
5
1
2
3
1
2
4
3
sym118
3. Ordering information
Table 2.
Ordering information
Type number Package
BAP70AM
Name
Description
Version
-
plastic surface-mounted package; 6 leads
SOT363
BAP70AM
NXP Semiconductors
Silicon PIN diode array
4. Marking
Table 3.
Marking
Type number
Marking code
BAP70AM
N9
5. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Min
Max
Unit
VR
reverse voltage
Conditions
-
50
V
IF
forward current
-
100
mA
Ptot
total power dissipation
-
300
mW
Tstg
storage temperature
−65
+150
°C
Tj
junction temperature
−65
+150
°C
Typ
Unit
260
K/W
Tsp = 90 °C
6. Thermal characteristics
Table 5.
Thermal characteristics
Symbol
Parameter
Rth(j-sp)
thermal resistance from junction
to solder point
Conditions
BAP70AM_1
Product data sheet
© NXP B.V. 2006. All rights reserved.
Rev. 01 — 20 November 2006
2 of 7
BAP70AM
NXP Semiconductors
Silicon PIN diode array
7. Characteristics
Table 6.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VF
forward voltage
IF = 50 mA
-
0.9
1.1
V
IR
reverse current
VR = 50 V
-
-
<100
nA
Cd
diode capacitance
see Figure 1; f = 1 MHz;
-
diode forward resistance
rD
VR = 0 V
-
570
-
fF
VR = 1 V
-
400
-
fF
VR = 5 V
-
270
-
fF
VR = 20 V
-
200
250
fF
see Figure 2; f = 100 MHz;
-
IF = 0.5 mA
-
77
100
Ω
IF = 1 mA
-
40
50
Ω
IF = 10 mA
-
5.4
7
Ω
IF = 100 mA
-
1.4
1.9
Ω
τL
charge carrier life time
when switched from IF = 10 mA to
IR = 6 mA; RL = 100 Ω; measured at
IR = 3 mA
-
1.25
-
µs
LS
series inductance
IF = 100 mA; f = 100 MHz
-
0.6
-
nH
001aaa461
600
mce007
103
rD
(Ω)
Cd
(fF)
500
102
400
10
300
200
0
5
10
15
20
1
10−1
1
f = 1 MHz; Tj = 25 °C.
f = 100 MHz; Tj = 25 °C.
Fig 1. Diode capacitance as a function of reverse
voltage; typical values
Fig 2. Diode forward resistance as a function of
forward current; typical values
BAP70AM_1
Product data sheet
102
10
IF (mA)
VR (V)
© NXP B.V. 2006. All rights reserved.
Rev. 01 — 20 November 2006
3 of 7
BAP70AM
NXP Semiconductors
Silicon PIN diode array
8. Package outline
Plastic surface-mounted package; 6 leads
SOT363
D
E
B
y
X
A
HE
6
5
v M A
4
Q
pin 1
index
A
A1
1
2
e1
3
bp
c
Lp
w M B
e
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A1
max
bp
c
D
E
e
e1
HE
Lp
Q
v
w
y
mm
1.1
0.8
0.1
0.30
0.20
0.25
0.10
2.2
1.8
1.35
1.15
1.3
0.65
2.2
2.0
0.45
0.15
0.25
0.15
0.2
0.2
0.1
OUTLINE
VERSION
REFERENCES
IEC
SOT363
JEDEC
JEITA
SC-88
EUROPEAN
PROJECTION
ISSUE DATE
04-11-08
06-03-16
Fig 3. Package outline SOT363
BAP70AM_1
Product data sheet
© NXP B.V. 2006. All rights reserved.
Rev. 01 — 20 November 2006
4 of 7
BAP70AM
NXP Semiconductors
Silicon PIN diode array
9. Abbreviations
Table 7.
Abbreviations
Acronym
Description
PIN
P-type, Intrinsic, N-type
SMD
Surface Mounted Device
RF
Radio Frequency
SAT
Satellite
10. Revision history
Table 8.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BAP70AM_1
20061120
Product data sheet
-
-
BAP70AM_1
Product data sheet
© NXP B.V. 2006. All rights reserved.
Rev. 01 — 20 November 2006
5 of 7
BAP70AM
NXP Semiconductors
Silicon PIN diode array
11. Legal information
11.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
11.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
11.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a NXP Semiconductors product can reasonably be expected to
result in personal injury, death or severe property or environmental damage.
NXP Semiconductors accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or applications and therefore
such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
11.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
12. Contact information
For additional information, please visit: http://www.nxp.com
For sales office addresses, send an email to: [email protected]
BAP70AM_1
Product data sheet
© NXP B.V. 2006. All rights reserved.
Rev. 01 — 20 November 2006
6 of 7
BAP70AM
NXP Semiconductors
Silicon PIN diode array
13. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
8
9
10
11
11.1
11.2
11.3
11.4
12
13
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . .
General description. . . . . . . . . . . . . . . . . . . . . .
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pinning information . . . . . . . . . . . . . . . . . . . . . .
Ordering information . . . . . . . . . . . . . . . . . . . . .
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . .
Thermal characteristics. . . . . . . . . . . . . . . . . . .
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . .
Package outline . . . . . . . . . . . . . . . . . . . . . . . . .
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . .
Revision history . . . . . . . . . . . . . . . . . . . . . . . . .
Legal information. . . . . . . . . . . . . . . . . . . . . . . .
Data sheet status . . . . . . . . . . . . . . . . . . . . . . .
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact information. . . . . . . . . . . . . . . . . . . . . .
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
1
1
1
2
2
2
3
4
5
5
6
6
6
6
6
6
7
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2006.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 20 November 2006
Document identifier: BAP70AM_1
Similar pages