EB52E9 Series • RoHS Compliant (Pb-free) • Temperature Compensated Crystal Oscillator (TCXO) • Stratum 3 • HCMOS Output • 3.3V Supply Voltage • Ceramic 10-Pad SMD Package • External Voltage Control Option Available EB52E9 H 2.0 L 7.0 W 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Nominal Frequency (MHz) Frequency Stability Total Holdover Stability Total Frequency Tolerance Operating Temperature Range Supply Voltage (VDD) Input Current Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise/Fall Time Duty Cycle Load Drive Capability External Trim (Control Voltage Option) Control Voltage Range Linearity Input Impedance Typical Phase Noise (at 12.800MHz) 6.400, 6.500, 9.720, 10.000, 12.800, 13.000 vs. Operating Temperature Range (VDD = 3.3VDC, VC = 1.65VDC) Inclusive of Frequency Stability and 24 Hours Aging Inclusive of Frequency Tolerance, Frequency Stability, VDD (±1%), Load (±5%), Solder Reflow, and 20 Years Aging ±0.28ppm Maximum ±0.37ppm Maximum ±4.6ppm Maximum See Part Numbering Guide 3.3VDC ±5% 10mA Maximum 90% of VDD Minimum 10% of VDD Maximum 5nSec Maximum 50 ±5(%) Maximum 15pF HCMOS Load ±5ppm Minimum 0.0VDC to VDD 5% Maximum 100kOhms Minimum -80dBc/Hz -115dBc/Hz -135dBc/Hz -145dBc/Hz Enables Output Enables Output Disables Output: High Impedance 1pSec Maximum 5mSec Maximum -40°C to 125°C IOH = -4mA IOL = +4mA Measured at 20% to 80% of Waveform Measured at 50% of Waveform 1.65VDC ±1.65VDC; Positive Transfer Characteristic At offset of 10Hz At offset of 100Hz At offset of 1kHz At offset of >10kHz Tri-State Input Voltage (VIH and VIL) No Connect +0.9VDD Minimum +0.1VDD Maximum FJ = 12kHz to 20MHz RMS Phase Jitter Start Up Time Storage Temperature Range MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EB52E9 CERAMIC 3.3V OS5Q 07/07 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EB52E9 C 1 V - 13.000M TR OPERATING TEMPERATURE RANGE B=-10°C to 60°C C=-20°C to 70°C PACKAGING OPTIONS Blank=Bulk TR=Tape and Reel FREQUENCY STABILITY 1 = ±0.28ppm Maximum FREQUENCY EXTERNAL TRIM N=None (No Connection on Pad 10) V=Voltage Control MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS 2.00 MAX 5.00 ±0.10 0.40 ±0.10 MARKING ORIENTATION 7.00 ±0.10 2.54 1.00 ±0.10 (x5) 0.80 ±0.10 (x4) 4 5 3 2 6 7 8 1 1.27 ±0.10 (x4) 1.00 ±0.10 (x4) 10 0.60 ±0.10 (x6) 9 2.54 ±0.10 (x2) 0.80 ±0.10 1.4 (x4) Pin 1-3: Do Not Connect Pin 4: Ground Pin 5: Output Pin 6-7: Do Not Connect Pin 8: Tri-State Pin 9: Supply Voltage Pin 10: No Connect or Voltage Control 1.3 1.4 6.0 1.0 1.8 Solder Land (x5) 1.2 (x4) Tolerances= +0.1 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING ORIENTATION TAPE F 8.0±0.1 A B C D E 16.0±0.2 7.5±0.1 6.75±0.1 4.0±0.1 2.0±0.1 G H B0* 1.5 +0.1-0.0 F M N 1.5 MIN 50 MIN REEL O P 20.2 MIN 13.0±0.2 J K L R S T U V A0* 0.32 ±0.05 K0* 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 Q 40 MIN QTY/REEL 1,000 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2003 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Line 1: E XX.XXX Frequency in MHz (5 Digits Maximum + Decimal) Line 2: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EB52E9 CERAMIC 3.3V OS5Q 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 07/07 Specifications subject to change without notice.