EPCOS B65612A50000000 Pm/p/p cores halves/ep/tt/pr core Datasheet

PM/P/P Cores Halves/EP/TT/PR Cores
Series/Type:
P 36 x 22
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
B65612A50000000
B65611D0000R026
B65611D0000R048
Date of
Withdrawal
2004-10-18
2002-08-02
Deadline Last
Orders
2005-03-31
2002-12-31
Last Shipments
2005-09-30
2003-03-31
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
P 36 × 22
Core
B65611
■ In accordance with IEC 60133
■ Pot cores are supplied in sets
26 _ 1
36 _ 1
with
without
center hole center hole
mm–1
mm
mm2
mm2
mm3
ø16,2 _ 0,4
0,9+0,2
Approx. weight (per set)
m
57
59,5
ø5,4+0,3
s
0,25
53,5
213
173
11 400
14,6+0,4
0,26
52
202
—
10 600
22 _ 0,6
Σl/A
le
Ae
A min
Ve
29,9+0,8
4,5±0,2
Magnetic characteristics (per set)
g
FPK0270-9
Gapped
Material
N48
µe
nH
s
approx.
mm
Ordering code 1)
-D with center hole
-T with threaded sleeve
250 ± 2 %
400 ± 2 %
630 ± 3 %
1000 ± 3 %
1,20
0,62
0,35
0,22
52
83
130
207
B65611-+250-G48
B65611-+400-G48
B65611-+630-A48
B65611-+1000-A48
µe
Ordering code
-D with center hole
-W without center hole
AL value
Ungapped
Material
AL value
nH
N26
7600 + 30/– 20 %
1570
B65611-D-R26
N30
15200 + 30/– 20 %
3020
B65611-W-R30
1) Replace the + by the code letter ”D“ or ”T“ for the required version.
353 08/01
P 36 × 22
Accessories
B65612
Coil former
Standard:
Material:
Winding:
to IEC 60133
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
see “Processing Notes”, page 155
Insulating washer 1 between core and coil former
■ For tolerance compensation and for insulation
■ Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E
Coil former
120°C), 0,08 mm thick
Ordering code
Sections
AN
mm2
lN
mm
A R value
µΩ
1
63
73
39
Insulating washer 1 (reel packing, PU = 1 reel)
B65612-A5000
Coil former
ø16,5+0,2
ø17,9 _ 0,2
AN
3+0,8
29,6 _ 0,2
B65612-B-T1
0,8
14,4 _ 0,2
FPK0271-H
Insulating washer 1
FPK0167-I
354 08/01
P 36 × 22
Accessories
B65615
Mounting assembly for printed circuit boards
■ The set comprises a terminal carrier and a yoke
Terminal carrier
Material:
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code gray
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
Yoke
Spring yoke, made of nickel silver (0,6 mm), with ground terminal
Complete mounting assembly (10 solder terminals)
Ordering code: B65615-B1
Ground terminal
Hole arrangement
View in mounting direction
Ground
a) Yoke
b) Terminal carrier with 10 solder terminals
355 08/01
P 36 × 22
B63399
Accessories
B65679
Adjusting screw
■ Tube core with thread and core brake made of GFR polyterephthalate
Plastic adjusting screwdriver (not shown)
Plastic handle for adjusting screwdriver (not shown)
Core P 36 × 22
Material
N 48
Adjusting screw
Min.
adjusting
range
Ordering code
Tube core
∅ × length
mm
Material Color
code
250
400
4,55 × 6,3
N 22
red
15
8
B65679-E3-X22
400
630
4,98 × 6,3
N 22
black
15
10
B65679-E2-X22
630
1000
5,15 × 6,3
N 22
white
14
8
B65679-E1-X22
A L value
nH
%
Adjusting screwdriver
B63399-B1
Handle
B63399-B5
Adjusting screw 1)
1) Due to the limited distance between adjusting screw and internal borehole, the entire assembly must be accurately
centered.
356 08/01
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
 EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1
Similar pages